bfgminer

BFGMiner:
St. Barbara's Faithfully Glorified Mining Initiative Naturally Exceeding Rivals
or Basically a Freaking Good Miner

This is a multi-threaded multi-pool ASIC, FPGA, GPU and CPU miner with dynamic
clocking, monitoring, and fanspeed support for bitcoin. Do not use on multiple
block chains at the same time!

This code is provided entirely free of charge by the programmer in his spare
time so donations would be greatly appreciated. Please consider donating to the
address below.

Luke-Jr
1QATWksNFGeUJCWBrN4g6hGM178Lovm7Wh

DOWNLOADS:

http://luke.dashjr.org/programs/bitcoin/files/bfgminer

GIT TREE:

https://github.com/luke-jr/bfgminer

Bug reports:

https://github.com/luke-jr/bfgminer/issues

IRC Channel:

irc://irc.freenode.net/eligius

License: GPLv3. See COPYING for details.

SEE ALSO README.ASIC, README.FPGA, README.GPU, README.RPC, AND README.scrypt FOR
MORE INFORMATION ON EACH.

---

EXECUTIVE SUMMARY ON USAGE:

Single pool:

bfgminer -o http://pool:port -u username -p password

Multiple pools:

bfgminer -o http://pool1:port -u pool1username -p pool1password -o http://pool2:port -u pool2usernmae -p pool2password

Single pool with a standard http proxy:

bfgminer -o http://pool:port -x http://proxy:port -u username -p password

Single pool with a socks5 proxy:

bfgminer -o http://pool:port -x socks5://proxy:port -u username -p password

The list of proxy types are:
http: standard http 1.1 proxy
socks4: socks4 proxy
socks5: socks5 proxy
socks4a: socks4a proxy
socks5h: socks5 proxy using a hostname

Proxy support requires cURL version 7.21.7 or newer.

If you specify the --socks-proxy option to BFGMiner, it will only be applied to
all pools that don't specify their own proxy setting like above


After saving configuration from the menu ([S],[W]) you do not need to give
BFGMiner any arguments, it will load your configuration instead.

Any configuration file may also contain a single
"include" : "filename"
to recursively include another configuration file.
Writing the configuration will save all settings from all files to the output
configuration file.


---
BUILDING BFGMINER

Everything you probably want, condensed:
build-essential autoconf automake libtool pkg-config libcurl4-gnutls-dev
libjansson-dev uthash-dev libncursesw5-dev libudev-dev libusb-1.0-0-dev
libevent-dev libmicrohttpd-dev hidapi

Dependencies:
autoconf http://www.gnu.org/software/autoconf/
automake http://www.gnu.org/software/automake/
libtool http://www.gnu.org/software/libtool/
pkg-config http://www.freedesktop.org/wiki/Software/pkg-config
...or pkgconf https://github.com/pkgconf/pkgconf

libcurl4-gnutls-dev http://curl.haxx.se/libcurl/

libjansson-dev 2.0+ http://www.digip.org/jansson/

uthash-dev 1.9.4+ http://troydhanson.github.io/uthash/

Optional Dependencies:
Text-User-Interface (TUI): curses dev library; any one of:
libncurses5-dev http://www.gnu.org/software/ncurses/ (Linux and Mac)
libncursesw5-dev ^ same
libpdcurses http://pdcurses.sourceforge.net/ (Linux/Mac/Windows)

Multiple ASIC/FPGA autodetection: any one of:
sysfs (built-in to most Linux kernels, just mount on /sys)
libudev-dev http://www.freedesktop.org/software/systemd/libudev/

HashBuster Nano & NanoFury USB devices:
hidapi https://github.com/signal11/hidapi

getwork server for Block Erupter Blades:
libmicrohttpd-dev 0.9.5+ http://www.gnu.org/software/libmicrohttpd/

Stratum proxy:
libevent 2.0.3+ http://libevent.org/

HashBuster Micro, Klondike, X6500 and ZTEX FPGA boards:
libusb-1.0-0-dev http://www.libusb.org/

Video card GPU mining (free):
llvm 3.3+ http://llvm.org/
clang 3.3+ http://clang.llvm.org/
libclc http://libclc.llvm.org/
Mesa 9.2.0+ http://www.mesa3d.org/

ATi/AMD video card GPU mining (non-free):
AMD APP SDK http://developer.amd.com/tools/heterogeneous-computing/amd-accelerated-parallel-processing-app-sdk/

CPU mining optimized assembly algorithms:
yasm 1.0.1+ http://yasm.tortall.net/


BFGMiner specific configuration options:
--disable-avalon Compile support for Avalon (default enabled)
--enable-cpumining Build with cpu mining support(default disabled)
--enable-opencl Compile support for OpenCL (default disabled)
--disable-adl Build without ADL monitoring (default enabled)
--disable-bitfury Compile support for Bitfury (default enabled)
--enable-bfsb Compile support for BFSB (default disabled)
--disable-bigpic Compile support for Big Picture Mining USB (default
enabled)
--disable-littlefury Compile support for LittleFury (default enabled)
--disable-nanofury Compile support for NanoFury (default enabled)
--disable-hashbuster Compile support for HashBuster Nano (default
enabled)
--disable-hashbuster2 Compile support for HashBuster Micro (default if
libusb)
--enable-metabank Compile support for Metabank (default disabled)
--disable-bitforce Compile support for BitForce (default enabled)
--disable-icarus Compile support for Icarus (default enabled)
--disable-klondike Compile support for Klondike (default enabled)
--enable-knc Compile support for KnC (default disabled)
--disable-modminer Compile support for ModMiner (default enabled)
--disable-x6500 Compile support for X6500 (default enabled)
--disable-ztex Compile support for ZTEX (default if libusb)
--enable-scrypt Compile support for scrypt mining (default disabled)
--with-system-libblkmaker Use system libblkmaker rather than bundled one
(default disabled)
--without-sensors Build with libsensors monitoring (default enabled)
--without-curses Compile support for curses TUI (default enabled)
--without-libmicrohttpd Compile support for libmicrohttpd getwork server
(default enabled)
--without-libevent Compile support for libevent stratum server (default
enabled)
--without-libusb Compile using libusb (default enabled)
--without-libudev Autodetect FPGAs using libudev (default enabled)

Basic *nix build instructions:

./autogen.sh # only needed if building from git repo
./configure
make

No installation is necessary. You may run BFGMiner from the build directory
directly.

On Mac OS X, you can use Homebrew to install the dependency libraries. When you
are ready to build BFGMiner, you may need to point the configure script at one
or more pkg-config paths. For example:
./configure PKG_CONFIG_PATH=/usr/local/opt/curl/lib/pkgconfig:/usr/local/opt/jansson/lib/pkgconfig

Native WIN32 build instructions: see windows-build.txt

If you build BFGMiner from source, it is recommended that you run it from the
build directory. On *nix, you will usually need to prepend your command with a
path like this (if you are in the bfgminer directory already): ./bfgminer
To install system wide run 'sudo make install' or 'make install' as root. You
can then run from any terminal.

---

Usage instructions: Run "bfgminer --help" to see options:

Usage: bfgminer [-DdElmpPQqUsTouOchnV]

Options for both config file and command line:
--api-allow Allow API access (if enabled) only to the given list of [W:]IP[/Prefix] address[/subnets]
This overrides --api-network and you must specify 127.0.0.1 if it is required
W: in front of the IP address gives that address privileged access to all api commands
--api-description Description placed in the API status header (default: BFGMiner version)
--api-groups API one letter groups G:cmd:cmd[,P:cmd:*...]
See README.RPC for usage
--api-listen Listen for API requests (default: disabled)
By default any command that does not just display data returns access denied
See --api-allow to overcome this
--api-mcast Enable API Multicast listener, default: disabled
--api-mcast-addr API Multicast listen address (default: "224.0.0.75")
--api-mcast-code Code expected in the API Multicast message, don't use '-' (default: "FTW")
--api-mcast-port API Multicast listen port (default: 4028)
--api-network Allow API (if enabled) to listen on/for any address (default: only 127.0.0.1)
--api-port Port number of miner API (default: 4028)
--balance Change multipool strategy from failover to even share balance
--benchmark Run BFGMiner in benchmark mode - produces no shares
--chroot-dir Chroot to a directory right after startup
--cmd-idle Execute a command when a device is allowed to be idle (rest or wait)
--cmd-sick Execute a command when a device is declared sick
--cmd-dead Execute a command when a device is declared dead
--coinbase-addr Set coinbase payout address for solo mining
--coinbase-sig Set coinbase signature when possible
--compact Use compact display without per device statistics
--debug|-D Enable debug output
--debuglog Enable debug logging
--device|-d Enable only devices matching pattern (default: all)
--disable-rejecting Automatically disable pools that continually reject shares
--http-port Port number to listen on for HTTP getwork miners (-1 means disabled) (default: -1)
--expiry|-E Upper bound on how many seconds after getting work we consider a share from it stale (w/o longpoll active) (default: 120)
--expiry-lp Upper bound on how many seconds after getting work we consider a share from it stale (with longpoll active) (default: 3600)
--failover-only Don't leak work to backup pools when primary pool is lagging
--force-dev-init Always initialize devices when possible (such as bitstream uploads to some FPGAs)
--kernel-path|-K Specify a path to where bitstream and kernel files are (default: "/usr/local/bin")
--load-balance Change multipool strategy from failover to quota based balance
--log|-l Interval in seconds between log output (default: 5)
--log-file|-L Append log file for output messages
--log-microseconds Include microseconds in log output
--monitor|-m Use custom pipe cmd for output messages
--net-delay Impose small delays in networking to avoid overloading slow routers
--no-gbt Disable getblocktemplate support
--no-getwork Disable getwork support
--no-longpoll Disable X-Long-Polling support
--no-restart Do not attempt to restart devices that hang
--no-stratum Disable Stratum detection
--no-submit-stale Don't submit shares if they are detected as stale
--no-opencl-binaries Don't attempt to use or save OpenCL kernel binaries
--no-unicode Don't use Unicode characters in TUI
--noncelog Create log of all nonces found
--pass|-p Password for bitcoin JSON-RPC server
--per-device-stats Force verbose mode and output per-device statistics
--pool-proxy|-x Proxy URI to use for connecting to just the previous-defined pool
--protocol-dump|-P Verbose dump of protocol-level activities
--queue|-Q Minimum number of work items to have queued (0 - 10) (default: 1)
--quiet|-q Disable logging output, display status and errors
--real-quiet Disable all output
--remove-disabled Remove disabled devices entirely, as if they didn't exist
--request-diff Request a specific difficulty from pools (default: 1.0)
--retries Number of times to retry failed submissions before giving up (-1 means never) (default: -1)
--rotate Change multipool strategy from failover to regularly rotate at N minutes (default: 0)
--round-robin Change multipool strategy from failover to round robin on failure
--scan|-S Configure how to scan for mining devices
--scan-time|-s Upper bound on time spent scanning current work, in seconds (default: 60)
--sched-start Set a time of day in HH:MM to start mining (a once off without a stop time)
--sched-stop Set a time of day in HH:MM to stop mining (will quit without a start time)
--scrypt Use the scrypt algorithm for mining (non-bitcoin)
--set-device Set default parameters on devices; eg, NFY:osc6_bits=50
--setuid Username of an unprivileged user to run as
--sharelog Append share log to file
--shares Quit after mining N shares (default: unlimited)
--show-processors Show per processor statistics in summary
--skip-security-checks Skip security checks sometimes to save bandwidth; only check 1/th of the time (default: never skip)
--socks-proxy Set socks proxy (host:port) for all pools without a proxy specified
--stratum-port Port number to listen on for stratum miners (-1 means disabled) (default: -1)
--submit-threads Minimum number of concurrent share submissions (default: 64)
--syslog Use system log for output messages (default: standard error)
--temp-cutoff Maximum temperature devices will be allowed to reach before being disabled, one value or comma separated list
--temp-hysteresis Set how much the temperature can fluctuate outside limits when automanaging speeds (default: 3)
--temp-target Target temperature when automatically managing fan and clock speeds
--text-only|-T Disable ncurses formatted screen output
--unicode Use Unicode characters in TUI
--url|-o URL for bitcoin JSON-RPC server
--user|-u Username for bitcoin JSON-RPC server
--verbose Log verbose output to stderr as well as status output
--userpass|-O Username:Password pair for bitcoin JSON-RPC server
Options for command line only:
--config|-c Load a JSON-format configuration file
See example.conf for an example configuration.
--help|-h Print this message
--version|-V Display version and exit


GPU only options:

--auto-fan Automatically adjust all GPU fan speeds to maintain a target temperature
--auto-gpu Automatically adjust all GPU engine clock speeds to maintain a target temperature
--gpu-threads|-g Number of threads per GPU (1 - 10) (default: 2)
--gpu-dyninterval Set the refresh interval in ms for GPUs using dynamic intensity (default: 7)
--gpu-engine GPU engine (over)clock range in MHz - one value, range and/or comma separated list (e.g. 850-900,900,750-850)
--gpu-fan GPU fan percentage range - one value, range and/or comma separated list (e.g. 25-85,85,65)
--gpu-map Map OpenCL to ADL device order manually, paired CSV (e.g. 1:0,2:1 maps OpenCL 1 to ADL 0, 2 to 1)
--gpu-memclock Set the GPU memory (over)clock in MHz - one value for all or separate by commas for per card.
--gpu-memdiff Set a fixed difference in clock speed between the GPU and memory in auto-gpu mode
--gpu-platform Select OpenCL platform ID to use for GPU mining
--gpu-powertune Set the GPU powertune percentage - one value for all or separate by commas for per card.
--gpu-reorder Attempt to reorder GPU devices according to PCI Bus ID
--gpu-vddc Set the GPU voltage in Volts - one value for all or separate by commas for per card.
--intensity|-I Intensity of GPU scanning (d or -10 -> 10, default: d to maintain desktop interactivity)
--kernel|-k Override kernel to use (diablo, poclbm, phatk or diakgcn) - one value or comma separated
--no-adl Disable the ATI display library used for monitoring and setting GPU parameters
--temp-overheat Overheat temperature when automatically managing fan and GPU speeds (default: 85)
--vectors|-v Override detected optimal vector (1, 2 or 4) - one value or comma separated list
--worksize|-w Override detected optimal worksize - one value or comma separated list

GPU mining is disabled by default for SHA256d if you have any dedicated mining
devices, but can be enabled explicitly specifying the -S opencl:auto option.

See README.GPU for more information regarding GPU mining.

scrypt only options:

--lookup-gap Set GPU lookup gap for scrypt mining, comma separated
--shaders GPU shaders per card for tuning scrypt, comma separated
--thread-concurrency Set GPU thread concurrency for scrypt mining, comma separated

See README.scrypt for more information regarding (non-bitcoin) scrypt mining.


To use ASICs or FPGAs, you will need to be sure the user BFGMiner is running as
has appropriate permissions. This varies by operating system.
On Gentoo: sudo usermod -a -G uucp
On Ubuntu: sudo usermod -a -G dialout
Note that on GNU/Linux systems, you will usually need to login again before
group changes take effect.

By default, BFGMiner will scan for autodetected devices. If you want to prevent
BFGMiner from doing this, you can use "-S noauto". If you want to probe all
serial ports, you can use "-S all"; note that this may write data to non-mining
devices which may then behave in unexpected ways!

On Linux, is usually of the format /dev/ttyUSBn
On Mac OS X, is usually of the format /dev/cu.usb*
On Windows, is usually of the format \\.\COMn
(where n = the correct device number for the device)

The official supplied binaries are compiled with support for all ASICs/FPGAs.
To force the code to only attempt detection with a specific driver,
prepend the argument with the driver name followed by an "at" symbol.
For example, "icarus@/dev/ttyUSB0" or "bitforce@\\.\COM5"
or using the short name: "ica@/dev/ttyUSB0" or "bfl@\\.\COM5"

Some FPGAs do not have non-volatile storage for their bitstreams and must be
programmed every power cycle, including first use. To use these devices, you
must download the proper bitstream from the vendor's website and copy it to the
"bitstreams" directory into your BFGMiner application directory.

See README.ASIC and README.FPGA for more information regarding these.

See README.CPU for information regarding CPU mining.

---

WHILE RUNNING:

The following options are available while running with a single keypress:

[M]anage devices [P]ool management [S]ettings [D]isplay options [H]elp [Q]uit

M gives you something like:

Select processor to manage using up/down arrow keys
BFL 0a: 78.0C | 3.64/ 3.70/ 2.91Gh/s | A:46 R:0+0(none) HW: 2/none
BitFORCE SHA256 SC from Butterfly Labs
Serial: FTWN6T67

[D]isable
Or press Enter when done


P gives you:

Current pool management strategy: Failover
[F]ailover only disabled
[A]dd pool [R]emove pool [D]isable pool [E]nable pool
[C]hange management strategy [S]witch pool [I]nformation


S gives you:

[L]ongpoll: On
[Q]ueue: 1
[S]cantime: 60
[E]xpiry: 120
[R]etries: -1
[W]rite config file
[B]FGMiner restart


D gives you:

[N]ormal [C]lear [S]ilent mode (disable all output)
[D]ebug:off
[P]er-device:off
[Q]uiet:off
[V]erbose:off
[R]PC debug:off
[W]orkTime details:off
co[M]pact: off
[L]og interval:5


Q quits the application.


The running log shows output similar to that below:

[2013-02-13 00:26:30] Accepted 1758e8df BFL 0 pool 0 Diff 10/1
[2013-02-13 00:26:32] Accepted 1d9a2199 MMQ 0a pool 0 Diff 8/1
[2013-02-13 00:26:33] Accepted b1304924 ZTX 0 pool 0 Diff 1/1
[2013-02-13 00:26:33] Accepted c3ad22f4 XBS 0b pool 0 Diff 1/1

The 8 byte hex value are the 2nd set of 32 bits from the share submitted to the
pool. The 2 diff values are the actual difficulty target that share reached
followed by the difficulty target the pool is currently asking for.

---
Also many issues and FAQs are covered in the forum threads
dedicated to this program,
https://bitcointalk.org/?topic=78192
https://bitcointalk.org/?topic=168174

The block display shows:
Block: ...1b89f8d3 #217364 Diff:7.67M (54.93Th/s) Started: [17:17:22]

This shows a short stretch of the current block, the next block's height and
difficulty (including the network hashrate that difficulty represents), and when
the search for the new block started.

The BFGMiner status line shows:
ST:1 F:0 NB:1 AS:0 BW:[ 75/241 B/s] E:2.42 I:12.99mBTC/hr BS:2.71k

ST is STaged work items (ready to use).
F is network Failure occasions (server down or slow to provide work)
NB is New Blocks detected on the network
AS is Active Submissions (shares in the process of submitting)
BW is BandWidth usage on the network (received/sent)
E is Efficiency defined as number of shares accepted (multiplied by their
difficulty) per 2 KB of bandwidth
I is expected Income, calculated by actual shares submitted in 100% PPS value
(assumes Bitcoin, does not account for altcoin conversions!)
BS is the all time Best Share difficulty you've found

The totals line shows the following:
6/32 75.0C | 171.3/170.8/171.2Gh/s | A:729 R:8+0(.01%) HW:0/.81%

Each column is as follows:
The number of devices and processors currently mining
Hottest temperature reported by any processor
5 second exponentially decaying average hash rate
An all time average hash rate
An all time average hash rate based on actual nonces found, adjusted for pool
reject and stale rate
The number of Accepted shares
The number of Rejected shares and stale shares discarded (never submitted),
and the percentage these are of total found.
The number of HardWare errors, and percentage invalid of nonces returned

Each device shows:
BFL 2: 74.0C | 51.97/58.90/57.17Gh/s | A:847 R:15+0(.54%) HW:496/.91%

Columns are the same as in the totals line.


---
MULTIPOOL

FAILOVER STRATEGIES WITH MULTIPOOL:
A number of different strategies for dealing with multipool setups are
available. Each has their advantages and disadvantages so multiple strategies
are available by user choice, as per the following list:

FAILOVER:
The default strategy is failover. This means that if you input a number of
pools, it will try to use them as a priority list, moving away from the 1st
to the 2nd, 2nd to 3rd and so on. If any of the earlier pools recover, it will
move back to the higher priority ones.

ROUND ROBIN:
This strategy only moves from one pool to the next when the current one falls
idle and makes no attempt to move otherwise.

ROTATE:
This strategy moves at user-defined intervals from one active pool to the next,
skipping pools that are idle.

LOAD BALANCE:
This strategy sends work to all the pools on a quota basis. By default, all
pools are allocated equal quotas unless specified with --quota. This
apportioning of work is based on work handed out, not shares returned so is
independent of difficulty targets or rejected shares. While a pool is disabled
or dead, its quota is dropped until it is re-enabled. Quotas are forward
looking, so if the quota is changed on the fly, it only affects future work.
If all pools are set to zero quota or all pools with quota are dead, it will
fall back to a failover mode. See quota below for more information.

The failover-only flag has special meaning in combination with load-balance
mode and it will distribute quota back to priority pool 0 from any pools that
are unable to provide work for any reason so as to maintain quota ratios
between the rest of the pools.

BALANCE:
This strategy monitors the amount of difficulty 1 shares solved for each pool
and uses it as a basis for trying to doing the same amount of work for each
pool.


---
SOLO MINING

BFGMiner supports solo mining with any GBT-compatible bitcoin node (such as
bitcoind). To use this mode, you need to specify the URL of your bitcoind node
using the usual pool options (--url, --userpass, etc), and the --coinbase-addr
option to specify the Bitcoin address you wish to receive the block rewards
mined. If you are solo mining with more than one instance of BFGMiner (or any
other software) per payout address, you must also specify data using the
--coinbase-sig option to ensure each miner is working on unique work. Note
that this data will be publicly seen if your miner finds a block using any
GBT-enabled pool, even when not solo mining (such as failover). If your
bitcoin node does not support longpolling (for example, bitcoind 0.8.x), you
should consider setting up a failover pool to provide you with block
notifications. Note that solo mining does not use shares, so BFGMiner's adjusted
hashrate (third column) may suddenly drop to zero if a block you submit is
rejected; this does not indicate that it has stopped mining.

Example solo mining usage:

bfgminer -o http://localhost:8332 -u username -p password \
--coinbase-addr 1QATWksNFGeUJCWBrN4g6hGM178Lovm7Wh \
--coinbase-sig "rig1: This is Joe's block!"


---
QUOTAS

The load-balance multipool strategy works off a quota based scheduler. The
quotas handed out by default are equal, but the user is allowed to specify any
arbitrary ratio of quotas. For example, if all the quota values add up to 100,
each quota value will be a percentage, but if 2 pools are specified and pool0
is given a quota of 1 and pool1 is given a quota of 9, pool0 will get 10% of
the work and pool1 will get 90%. Quotas can be changed on the fly with RPC,
and do not act retrospectively. Setting a quota to zero will effectively
disable that pool unless all other pools are disabled or dead. In that
scenario, load-balance falls back to regular failover priority-based strategy.
While a pool is dead, it loses its quota and no attempt is made to catch up
when it comes back to life.

To specify quotas on the command line, pools should be specified with a
semicolon separated --quota(or -U) entry instead of --url. Pools specified with
--url are given a nominal quota value of 1 and entries can be mixed.

For example:
--url poolA:portA -u usernameA -p passA --quota "2;poolB:portB" -u usernameB -p passB
Will give poolA 1/3 of the work and poolB 2/3 of the work.

Writing configuration files with quotas is likewise supported. To use the above
quotas in a configuration file they would be specified thus:

"pools" : [
{
"url" : "poolA:portA",
"user" : "usernameA",
"pass" : "passA"
},
{
"quota" : "2;poolB:portB",
"user" : "usernameB",
"pass" : "passB"
}
]


---
LOGGING

BFGMiner will log to stderr if it detects stderr is being redirected to a file.
To enable logging simply add 2>logfile.txt to your command line and logfile.txt
will contain the logged output at the log level you specify (normal, verbose,
debug etc.)

In other words if you would normally use:
./bfgminer -o xxx -u yyy -p zzz
if you use
./bfgminer -o xxx -u yyy -p zzz 2>logfile.txt
it will log to a file called logfile.txt and otherwise work the same.

There is also the -m option on linux which will spawn a command of your choice
and pipe the output directly to that command.

The WorkTime details 'debug' option adds details on the end of each line
displayed for Accepted or Rejected work done. An example would be:

<-00000059.ed4834a3 M:X D:1.0 G:17:02:38:0.405 C:1.855 (2.995) W:3.440 (0.000) S:0.461 R:17:02:47

The first 2 hex codes are the previous block hash, the rest are reported in
seconds unless stated otherwise:
The previous hash is followed by the getwork mode used M:X where X is one of
P:Pool, T:Test Pool, L:LP or B:Benchmark,
then D:d.ddd is the difficulty required to get a share from the work,
then G:hh:mm:ss:n.nnn, which is when the getwork or LP was sent to the pool and
the n.nnn is how long it took to reply,
followed by 'O' on its own if it is an original getwork, or 'C:n.nnn' if it was
a clone with n.nnn stating how long after the work was recieved that it was
cloned, (m.mmm) is how long from when the original work was received until work
started,
W:n.nnn is how long the work took to process until it was ready to submit,
(m.mmm) is how long from ready to submit to actually doing the submit, this is
usually 0.000 unless there was a problem with submitting the work,
S:n.nnn is how long it took to submit the completed work and await the reply,
R:hh:mm:ss is the actual time the work submit reply was received

If you start BFGMiner with the --sharelog option, you can get detailed
information for each share found. The argument to the option may be "-" for
standard output (not advisable with the ncurses UI), any valid positive number
for that file descriptor, or a filename.

To log share data to a file named "share.log", you can use either:
./bfgminer --sharelog 50 -o xxx -u yyy -p zzz 50>share.log
./bfgminer --sharelog share.log -o xxx -u yyy -p zzz

For every share found, data will be logged in a CSV (Comma Separated Value)
format:
timestamp,disposition,target,pool,dev,thr,sharehash,sharedata
For example (this is wrapped, but it's all on one line for real):
1335313090,reject,
ffffffffffffffffffffffffffffffffffffffffffffffffffffffff00000000,
http://localhost:8337,GPU0,0,
6f983c918f3299b58febf95ec4d0c7094ed634bc13754553ec34fc3800000000,
00000001a0980aff4ce4a96d53f4b89a2d5f0e765c978640fe24372a000001c5
000000004a4366808f81d44f26df3d69d7dc4b3473385930462d9ab707b50498
f681634a4f1f63d01a0cd43fb338000000000080000000000000000000000000
0000000000000000000000000000000000000000000000000000000080020000

---

RPC API

For RPC API details see the README.RPC file

---

FAQ

Q: Why can't BFGMiner find lib even after I installed it from source
code?
A: On UNIX-like operating systems, you often need to run one or more commands to
reload library caches, such as "ldconfig" or similar. A couple of systems (such
as Fedora) ship with /usr/local/lib missing from their library search path. In
this case, you can usually add it like this:
echo /usr/local/lib >/etc/ld.so.conf.d/local.conf
Please note that if your libraries installed into lib64 instead of lib, you
should use that in the ld.so config file above instead.

Q: BFGMiner segfaults when I change my shell window size.
A: Older versions of libncurses have a bug to do with refreshing a window
after a size change. Upgrading to a new version of curses will fix it.

Q: Can I mine on servers from different networks (eg smartcoin and bitcoin) at
the same time?
A: No, BFGMiner keeps a database of the block it's working on to ensure it does
not work on stale blocks, and having different blocks from two networks would
make it invalidate the work from each other.

Q: Can I configure BFGMiner to mine with different login credentials or pools
for each separate device?
A: No such feature has been implemented to support this.

Q: Can I put multiple pools in the config file?
A: Yes, check the example.conf file. Alternatively, set up everything either on
the command line or via the menu after startup and choose [S]ettings->[W]rite
config file and the file will be loaded one each startup.

Q: The build fails with gcc is unable to build a binary.
A: Remove the "-march=native" component of your CFLAGS as your version of GCC
does not support it.

Q: Can you implement feature X?
A: I can, but time is limited, and people who donate are more likely to get
their feature requests implemented.

Q: Work keeps going to my backup pool even though my primary pool hasn't
failed?
A: BFGMiner checks for conditions where the primary pool is lagging and will
pass some work to the backup servers under those conditions. The reason for
doing this is to try its absolute best to keep the devices working on something
useful and not risk idle periods. You can disable this behaviour with the
option --failover-only.

Q: Is this a virus?
A: As BFGMiner is being packaged with other trojan scripts, some antivirus
software is falsely accusing bfgminer.exe as being the actual virus, rather than
whatever it is being packaged with. If you installed BFGMiner yourself from a
reputable source then you do not have a virus on your computer. Complain to your
antivirus software company. They seem to be flagging even source code from
BFGMiner as malicious now, even though text source files can't do anything by
themselves.

Q: Can you modify the display to include more of one thing in the output and
less of another, or can you change the quiet mode or can you add yet another
output mode?
A: Everyone will always have their own view of what is important to monitor.
The defaults are very sane and I have very little interest in changing this
any further.

Q: Why is my efficiency above/below 1.00?
A: Efficiency simply means how many shares you return for the amount of
bandwidth used. It does not correlate with efficient use of your hardware, and
is a measure of a combination of hardware speed, block luck, pool design and
many other factors.

Q: What are the best parameters to pass for X pool/hardware/device.
A: Virtually always, the DEFAULT parameters give the best results. Most user
defined settings lead to worse performance.

Q: What happened to CPU mining?
A: See README.CPU for more information.

Q: Is there a GUI version?
A: Yes, Nate Woolls maintains a GUI interface for BFGMiner called MultiMiner,
available at http://multiminerapp.com

Q: I'm having an issue. What debugging information should I provide?
A: Start BFGMiner with your regular commands and add -D -T --verbose and provide
the full startup output and a summary of your hardware, operating system, and if
applicable, ATI driver version and ATI stream version.

Q: Can I mine with BFGMiner on a Mac?
A: BFGMiner will compile on OS X, but the performance of GPU mining is
compromised due to the OpenCL implementation on OS X, there is no temperature or
fanspeed monitoring and the cooling design of most Macs, despite having
powerful GPUs, will usually not cope with constant usage leading to a high risk
of thermal damage. It is highly recommended not to mine on a Mac unless it is
with an external USB device.

Q: My network gets slower and slower and then dies for a minute?
A; Try the --net-delay option if you are on a getwork or GBT server.

Q: How do I tune for P2Pool?
A: P2Pool has very rapid expiration of work and new blocks, it is suggested you
decrease intensity by 1 from your optimal value, and decrease GPU threads to 1
with -g 1. It is also recommended to use --failover-only since the work is
effectively like a different block chain. If mining with a Mini Rig, it is worth
adding the --bfl-range option.

Q: Are OpenCL kernels from other mining software useable in BFGMiner?
A: No, the APIs are slightly different between the different software and they
will not work.

Q: I run PHP on windows to access the API with the example miner.php. Why does
it fail when php is installed properly but I only get errors about Sockets not
working in the logs?
A: Please check http://us.php.net/manual/en/sockets.installation.php

Q: What is a PGA?
A: At the moment, BFGMiner supports 5 FPGAs: BitForce, Icarus, ModMiner, X6500,
and ZTEX.
They are Field-Programmable Gate Arrays that have been programmed to do Bitcoin
mining. Since the acronym needs to be only 3 characters, the "Field-" part has
been skipped. "PGA" is also used for devices built with Application-Specific
Integrated Circuits (ASICs).

Q: What is an ASIC?
A: They are Application Specific Integrated Circuit devices and provide the
highest performance per unit power due to being dedicated to only one purpose.

Q: How do I get my BFL/Icarus/Lancelot/Cairnsmore device to auto-recognise?
A: On Linux, if the /dev/ttyUSB* devices don't automatically appear, the only
thing that needs to be done is to load the driver for them:
BitForce: sudo modprobe ftdi_sio vendor=0x0403 product=0x6014
Erupter: sudo modprobe cp210x vendor=0x10c4 product=0xea60
Icarus: sudo modprobe pl2303 vendor=0x067b product=0x0230
Lancelot: sudo modprobe ftdi_sio vendor=0x0403 product=0x6001
Cairnsmore: sudo modprobe ftdi_sio vendor=0x0403 product=0x8350
On some systems you must manally install the driver required for the device.
OpenWrt drivers (install with opkg):
FTDI: kmod-usb-serial-ftdi
Erupter: kmod-usb-serial-cp210x
Icarus: kmod-usb-serial-pl2303
Windows drivers:
FTDI: http://www.ftdichip.com/Drivers/VCP.htm
Erupter: http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx
Icarus: http://prolificusa.com/pl-2303hx-drivers/

Q: I ran cgminer, and now BFGMiner doesn't work!
A: cgminer has its own non-standard implementations of the drivers for most USB
devices, and requires you to replace the official drivers with WinUSB on Windows
(usually using Zadig). Before you can use BFGMiner, you will need to restore the
original driver. Uninstalling the device (and WinUSB driver) from Device Manager
and re-plugging it will usually trigger driver re-installation to the default
drivers.

Q: On Linux I can see the /dev/ttyUSB* devices for my ICA/BFL/MMQ FPGA, but
BFGMiner can't mine on them?
A: Make sure you have the required privileges to access the /dev/ttyUSB*
devices:
sudo ls -las /dev/ttyUSB*
will give output like:
0 crw-rw---- 1 root dialout 188, 0 2012-09-11 13:49 /dev/ttyUSB0
This means your account must have the group 'dialout' or root privileges
To permanently give your account the 'dialout' group:
sudo usermod -G dialout -a `whoami`
Then logout and back in again

Q: Can I mine scrypt with FPGAs or ASICs?
A: Currently no. Bitcoin ASICs are only useful for SHA256d systems and FPGAs
generally aren't designed to handle scrypt efficiently.

Q: Why does BFGMiner show difficulty 0 when mining scrypt?
A: BFGMiner consistently uses pdiff measurement for difficulty everywhere,
rather than other measurements that may exist. For scrypt, pdiff 1 is very
difficult, and higher get exponentially harder. It is unlikely you will want to
use pdiff 1+ with scrypt until you have FPGAs and/or ASICs for it.

Q: What is stratum and how do I use it?
A: Stratum is a protocol designed to reduce resources for mining pools at the
cost of keeping the miner in the dark and blindly transferring his mining
authority to the pool. It is a return to the problems of the old centralized
"getwork" protocol, but capable of scaling to hardware of any speed like the
standard GBT protocol. If a pool uses stratum instead of GBT, BFGMiner will
automatically detect it and switch to the support as advertised if it can.
Stratum uses direct TCP connections to the pool and thus it will NOT currently
work through a http proxy but will work via a socks proxy if you need to use
one. If you input the stratum port directly into your configuration, or use the
special prefix "stratum+tcp://" instead of "http://", BFGMiner will ONLY try to
use stratum protocol mining.

Q: Why don't the statistics add up: Accepted, Rejected, Stale, Hardware Errors,
Diff1 Work, etc. when mining greater than 1 difficulty shares?
A: As an example, if you look at 'Difficulty Accepted' in the RPC API, the number
of difficulty shares accepted does not usually exactly equal the amount of work
done to find them. If you are mining at 8 difficulty, then you would expect on
average to find one 8 difficulty share, per 8 single difficulty shares found.
However, the number is actually random and converges over time as it is an
average, not an exact value, thus you may find more or less than the expected
average.

---

This code is provided entirely free of charge by the programmer in his spare
time so donations would be greatly appreciated. Please consider donating to the
address below.

Luke-Jr
1QATWksNFGeUJCWBrN4g6hGM178Lovm7Wh