bfgminer/NEWS

BFGMiner Version 3.10.8 - November 29, 2014

- Upgraded Windows libraries:
- - libcurl from 7.38.0 to 7.39.0
- - libjansson from 2.6 to 2.7
- Bugfix: bytes_free: Set buf to NULL so the bytes_t is reusable
- Bugfix: modminer: Avoid leaking devname when detecting claimed devices
- Bugfix: free memory allocated for config file loading/writing
- Bugfix: nanofury: Avoid NULL pointer dereference on init failure
- cpu: Fix processor count detection with HW_NCPU
- cpu: SCHED_IDLE and SCHED_BATCH can only be used with sched_priority 0
- cpu: fix sched_setaffinity parameter : sizeof(cpu_set_t)
- Update bundled libblkmaker to 0.4.1
- Bugfix: DevAPI: hashes_done: Explicitly cast to uint64_t for big calculations
(LLVM was allowing overflow)
- Bugfix: Highlight all active pools, in pool listing
- Bugfix: Cannot duplicate userpass option or we end up with it processed double


BFGMiner Version 3.10.7 - September 10, 2014

- Bugfix: bitforce: Initialise variable to NULL
- Bugfix: SSM: Check that a username is provided to mining.authorize
- Bugfix: SSM: When n2pad<0, release lock before returning
- Bugfix: SSM: Make buffers long enough to avoid overflows
- Bugfix: Recheck current_pool after calling pool_died
- Bugfix: Stable pool recovery: Only care if the pool is enabled


BFGMiner Version 3.10.6 - July 26, 2014

- Copyright cleanups
- README.ASIC: KnCMiner: Talk about additional i2c-tools dependency
- README.ASIC: KnCMiner: Remove mention of now-obsolete Bertmod
- README.ASIC: KnCMiner: Grammatical corrections
- Bugfix: RPC: Avoid processor-specific details in devdetails


BFGMiner Version 3.10.5 - July 7, 2014

- README: Update for commandline options
- Bugfix: add_pool: If no current pool set, initialise it (otherwise pool
testing may start a longpoll thread which tries to access currentpool
uninitialised)
- devpath_to_devid: *nix: Reject anything that doesn't begin with a /


BFGMiner Version 3.10.4 - June 30, 2014

- openwrt: Disable libusb via --without-libusb
- Bugfix: bifury: strtoll already implies native endian, no need to flip it
again
- Bugfix: Display proper statline R and HW error percents for values < 1
- Bugfix: cpu: Fix scrypt CPU miner
- Bugfix: scrypt: Fix scrypt hash postprocessing for big endian
- Bugfix: scrypt: Correct endian handling in PBKDF2_SHA256_80_128
- Bugfix: Copy ALL the data with swap32to<native>
- Bugfix: Wake up wait_lpcurrent if its conditions for returning may have
changed
- Bugfix: Initialise struct pool in add_pool rather than halfway through startup
- Bugfix: Parse userpass option with strchr rather than strtok to avoid
usernameless passwords getting into the username field and being displayed
- Bugfix: Free old coinbase script before setting a new one
- configure: Succeed even if the libblkmaker submodule is missing (only
--with-system-libblkmaker)
- make-release: Do builds with the official source release, to test that it
works
- Bugfix: DevAPI: Make for_each_logical_proc work correctly


BFGMiner Version 3.10.3 - June 11, 2014

- Upgraded Windows libmicrohttpd from 0.9.35 to 0.9.38_pre33603
- SGW: Workaround BE Cube bugs with new libmicrohttpd by forcing HTTP 1.0
response
- set_cloexec_socket: Explicitly cast SOCKET to HANDLE


BFGMiner Version 3.10.2 - June 6, 2014

- Update libblkmaker to 0.4.0
- README.RPC: Document Coinbase-Sig in config reply
- Bugfix: initiate_stratum: Ensure extranonce2 size is not negative (which could
lead to exploits later as too little memory gets allocated)
- Stratum: extract_sockaddr: Truncate overlong addresses rather than stack
overflow
- Bugfix: Avoid setting tv_idle before testing pool (it will be set if the test
fails)
- bfsb: Disable all banks before enabling the one we want, to avoid having two
enabled at the same time (eg, when switching from bank 3 to bank 2)
- Bugfix: Zero pool "Works"
- Bugfix: Set any listening sockets to close-on-exec/non-inheritable to avoid
issues rebinding them on restart
- RPC: Explicitly shutdown communication on client sockets to avoid them being
held open by forked processes
- RPC: Clean up mcast socket with tidyup_socket
- RPC: Move socket tidyup code to its own function
- Bugfix: RPC: Use pthread_exit rather than returning from the RPC thread, to
ensure tidyup gets called
- Bugfix: bitforce: During initialisation, clear each XLink slave exactly once
only


BFGMiner Version 3.10.1 - May 26, 2014

- Upgraded Windows libraries:
- - libcurl from 7.34.0 to 7.37.0 (and SSL support enabled)
- - libjansson from 2.4 to 2.6
- - libmicrohttpd from 0.9.30 to 0.9.35 (now Win64 also)
- - libusb from libusbx 1.0.17 to 1.0.18
- DevAPI: for_each_{managed,logical}_proc helper macros
- Update libblkmaker to 0.3.3
- make-release: Copy submodules from local system
- make-release: Automatically determine DLL dependencies to include
- Bugfix: littlefury: Avoid memory leak for already-claimed devices
- Bugfix: drillbit: Avoid 9-byte memory leak for already-claimed devices
- Bugfix: lowl-ftdi: ft232r_close: Free device handle
- Bugfix: bitfury: Avoid memory leaks when detect fails
- Bugfix: klondike: Correct case of dname
- Bugfix: hashfast: Set LIFE_INIT2 so a dead engine doesn't hold up the stats
line
- Bugfix: bitforce: Restore device name loading for FPGA Singles
- Bugfix: Add config.h include to files missing it
- Bugfix: swap32to?e: Ensure conditionals always have the same type
- Bugfix: Protect prev_cancelstate variables under console lock
- opencl: Silence warning about duplicate const qualifier
- hashbuster: Avoid signed char problems in return status check
- Bugfix: bfg_claim_any: Use a mutex to avoid races around device claims
- SSM: Silence JSON parse error message for HTTP POST and TLS attempts
- bifury: Defer precision loss until after checking osc6_bits value
- opencl: bfg_clBuildProgram function to share common error handling (logging)
code
- opencl: Avoid printing empty build logs
- Bugfix: opencl: Free allocated memory when done with it
- Bugfix: Stratum: Use an error buffer on struct pool rather than the stack, so
it remains valid for the lifetime of the connection
- Bugfix: Reset tv_idle on pools after test failure
- Bugfix: Ignore last work time if pool is known to be down
- pick_unit: Avoid infinite loop when passed inf float
- Bugfix: bitfury: Correct comment about how much of the nonce range chips
process
- Bugfix: Initialise getq (and stgd_lock) earlier so it is ready in case startup
interactive pool-add tries to stage work
- bitfury: Wait for two low frequency measurements before acting on a freq drop
(in case of a single misread)
- Bugfix: SSM: decref parsed JSON when done with it
- knc: Replace numeric constants with KNC_CORES_PER_DIE, KNC_DIE_PER_CHIP, and
KNC_CORES_PER_CHIP defines
- Bugfix: knc: Actually skip over extra processors rather than infinite loop
- Bugfix: Use rlim_t type for old_soft_limit so comparison with RLIM_INFINITY is
correct on all platforms
- Update alloca logic to work on more platforms
- start-bfgminer.sh: Shell script to (re)start bfgminer in a background screen
session
- Bugfix: Handle disabled CPU support properly in various places
- Bugfix: README.ASIC: KnCMiner: Use supported Angstrom feeds only
- Bugfix: pool_active: Skip testing explicitly when we have a recent answer
- RPC: Use struct timeval for mcast bind timer
- Bugfix: Restore 2-minutes-past-last-work wait before terminating unused
stratum connections
- Partial: Bugfix: Turn spidevc into lowl-spi to fix building the knc driver
without the bitfury driver
- SSM: Silence JSON parse error message for HTTP attempts
- Bugfix: Use UTF-8 for micro prefix internally (and in logging)
- Consistently allocate space used for formatting numbers
- util: utf8_len and utf8_strlen functions to quickly measure a character or
string
- Bugfix: README: Add missing driver build configuration options
- Bugfix: renumber_cgpu: No need to copy dev_repr over itself (and trying to is
undefined)
- Move OpenCL kernel FAQ to README.GPU and clarify it a bit
- Bugfix: Log work updates for all active pools in multipool mode
- test_work_current: Cleanup
- Bugfix: Differentiate pool_actively_desired from pool_actively_in_use for cnx_needed
- Abstract pool_actively_in_use to handle multipool checking for multiple uses
- Bugfix: antminer: Fix typo
- Bugfix: renumber_cgpu: Rebuild repr strings to match new information
- Bugfix: Skip final pool_active check in balancing modes (where pools switch
around often)
- Bugfix: Adjust quota GCD only after completely adding the pool, otherwise it
will be ignored by the adjustment
- Bugfix: opencl: Can only BFI_INT patch if using OpenCL binaries
- SGW: Support for scrypt
- README: Document VCOM low_latency flag and latency_timer sysfs attribute,
which can help run more VCOM-based devices on low-end USB hosts
- Add USB faqs.
- Bugfix: Stratum: Wait a bit for a response before assuming the pool is hiding
block contents
- README: FAQ about Raspberry Pi issues
- Check for when errno is set on windows as well as the windows variant for
errors.
- Partial: Handle interruptions to various select calls in util.c
- Bugfix: configure: Only fail due to not having libusb, if the user really
needs or wants libusb
- Bugfix: Update help display to replace (U)tility with (I)ncome
- Bugfix: Deduplicate % symbols in help display
- Bugfix: Correct documentation for --shares option
- cpu/scrypt: Fix last_nonce to be host endian also
- Bugfix: cpu: Correct results found by scrypt algorithm
- Bugfix: lowl-vcom: _get_osfhandle failure returns INVALID_HANDLE_VALUE, not
NULL
- Bugfix: lowl-vcom: Invalid fd checks should be for -1, not 0
- Bugfix: SSM: Actually acquire and release extranonce1s
- Bugfix: C reserves identifiers beginning with an underscore and uppercase
letter or another underscore
- Skip trying to submit shares in benchmark mode
- Rework benchmark mode
- Bugfix: configure: Only pull in lowl-usb for lowl-vcom if libusb is available
- Bugfix: hashfast: Ensure size of hex data passed to applog is of type int
- README.ASIC: Update "SGW" virtual device identifier to current "PXY"
- Bugfix: klondike: Reenable hw error reporting on nonces found for unknown work
- Bugfix: Expand deprecated work->subid field to int width, needed by klondike
driver for tracking work
- Bugfix: erupter: Sapphire detected as Emerald and Emerald not detected
- configure: Remove duplicate sys/file.h check
- Bugfix: httpsrv: Add missing includes for stdarg, stddef, stdio, and stdlib
- hashbusterusb: Initialise send packets fully to avoid leaking uninitialised
data to devices
- Bugfix: Correct typo in --help ("AlgoritHms")
- Bugfix: twinfury: Avoid crashing when next_work is not populated here
- Bugfix: hashbusterusb: Close device after failures
- Bugfix: hashbuster: Close device after failures
- README: List --quota in options
- README.ASIC: Update documentation for Avalon
- Bugfix: Leave thr->*work alone when disabling non-minerloop_async devices
- udev rules: Set flag so ModemManager ignores devices
- bifury: Thermal overheat causes restart losing the clock, so resend it while
temperature is over 80 C
- bitforce: Explicitly assign indexes for bitforce_proto enum
- Bugfix: RPC: MSG_PGASETOK does not have a string param
- littlefury: Close device if there are any communication problems
- littlefury: Abstract out littlefury_set_power
- Bugfix: hashfast: Add missing serial_claim
- Bugfix: drillbit: Add missing serial_claim
- Bugfix: bifury: Add missing serial_claim
- Bugfix: littlefury: Add missing serial_claim
- Bugfix: Allocate all new devices completely, before trying to activate any
(since the first processor may control the secondary ones)
- Since scrypt miners tend to work at actual share difficulty, use that for
diff1 counting
- Bugfix: diff1 measurements should be increased by nonce difficulty, not share
difficulty
- drillbit: strtol into a long int so negative responses properly get an error
- Rename *nonces variables to *_diff1 to reflect their nature better
- Refactor diff1 records to properly weigh non-diff1 work
- AUTHORS: Add Nico Oelgart
- Fixed multiple XSS injection vectors
- drillbit: Expand allowed external clock range to 0-65535


BFGMiner Version 3.10.0 - January 15, 2014

- Downgrade official Windows build compiler to GCC 4.7.3.
- Bugfix: Stratum: Accept JSON Number type for port number
- Bugfix: proxy: Set start timer when creating new virtual devices
- antminer: Add support for the Identify function - flashes LED 10 times
- drillbit: Expand allowed external clock range to 0-255
- drillbit: Forbid setting external clock usage if not supported by device
- Check for DBC_TEMP capability before trying to read temperature
- Bugfix: drillbit: Reduce work message to correct size
- README: Update documentation for new udev rules and "video" group
- Bugfix: opencl/adl: Set iSpeedType for get-fanspeed requests, and ensure we
don't change do something weird with the fan when initially setting user-defined
speed flag.
- Bugfix: drillbit: Initialise rv variable
- Bugfix: Simplify adding "http://" prefix to avoid strncat overflow (length
excludes null byte)
- hashfast: Debuglog work flushing
- hashfast: Implement OP_NONCE search flag
- hashfast: Log seq numbers for nonces found
- hashfast: Count hashes done by nonces found, rather than no-pending-work
(which could be triggered by flushes)
- hashfast: Just keep a queue of the 32 most recent work items per core
- hashfast: Convert to minerloop_queue driver model
- hashfast: Gracefully complain if we are given an unknown chip or core address
- udev rule for hashfast devices
- hashfast: New driver using UMS protocol
- CRC-8-CCITT implementation
- AUTHORS: Add Lingchao Xu and move nwoolls up to antminer driver (and mention
TwinFury driver for Andreas)
- knc: Workaround false compiler warning about "uninitialised" vars
- Bugfix: drillbit: Access fd after potentially reopening
- Remove Christmas colouring
- drillbit: Add udev rule
- drillbit: Correct configure logic to check for generic bitfury code (needed to
decode nonces)
- drillbit: Implement some basic problem recovery
- drillbit: Support identify command
- drillbit: Read/write access to clock and voltage configuration from RPC and
ManageTUI
- drillbit: Store board configuration
- drillbit: Read temperature sensor
- drillbit: Check nonces against prev work
- drillbit: Implement mining
- drillbit: Only detection code
- antminer: Initial support for the Bitmain AntMiner U1 ASIC Includes support
for identifying the U1 separately from Icarus and Block Erupter Also includes
overclocking via --set-device antminer:clock=xHEX
- Extend horizontal lines to full screen width
- Log devid for USB string request failures
- Bugfix: segmentation fault if the terminal window is too narrow for the Help
and Quit items
- Accept "address" spelled out in --coinbase-addr option
- Bugfix: document the need to package zlib1.dll in the Windows build
instructions
- Bugfix: Stratum: Re-read pool sock var after suspend+restart
- Silence false uninitialised var use warning and calculate dev_runtime only
once
- Bugfix: HID API not properly detected on Mac OS X
- Adjust device list size as necessary when accessing options
- Avoid erasing the screen when statusy is not changing
- Abstract common set_statusy code out of change_logwinsize and check_winsizes
- TUI: Support pgup/pgdown for scrolling device list by page
- Bugfix: icarus: quirk_reopen is an int
- Bugfix: Do not allocate spi_port on the Stack, even to initialize -
EXC_BAD_ACCESS on OS X
- get_statline3: Simplify statistics gathering
- Bugfix: twinfury: Use serial number formatted over USB, so it works with
--scan
- twinfury: Only debuglog temperature debugging data when --device-protocol-dump
is enabled
- Bugfix: twinfury: Populate temperature info on both processors
- Option --weighed-stats to display A and R values weighed by difficulty
- README.GPU: Document always-disabled-by-default for OpenCL driver
- AUTHORS: Add Nate Woolls
- Extend menu to full width of window
- Abstract out spaces-to-eol to bfg_wspctoeol function
- Elaborate on spi_port+stack problem in comments
- Bugfix: Do not allocate spi_port on the Stack - EXC_BAD_ACCESS on OS X
- Bugfix: don't attempt to probe Bluetooth devices when scanning hardware
- x6500: Allow overriding the maximum frequency used by the dynclock logic Can
now use e.g. --set-device x6500:maxclock=210 Prevents spending time on
frequencies that only produce HW errors
- HACKING: Clearly document that dname must be lowercase and alphabetic
- bifury: Tolerate corruption in submit message, remapping shares to the first
processor if chip id is unrecognised
- bifury: Tolerate corruption in hwerror message
- bifury: Tolerate corruption in job message, and only count hashes done when
completing a known job
- Use a lowercase driver name to fix --scan pattern matching Otherwise the
following doesn't work: -S noauto -S twinfury:auto


BFGMiner Version 3.9.0 - December 25, 2013

- Update official Win32 build compiler and library:
- - Upgrade GCC from 4.8.1 to 4.8.2
- - Upgrade libcurl from 7.28.1 to 7.34.0
- Update official Win64 build compiler and library:
- - Upgrade GCC from 4.7.3 to 4.8.2
- - Upgrade mingw64-runtime from 2.0.8 to 3.0.0
- Green-on-red title colours for Christmas release
- write_config: Include http-port and stratum-port options
- Interpret F1 as a request for Help
- Bugfix: SSM: Free old _ssm_notify before replacing it
- Bugfix: SSM: Clean _ssm_cur_job_work as needed to avoid memory leaks
- Support matching --scan with lowlevel devid
- cgpu_match: Unit test for USB device path matching
- Bugfix: cgpu_match: Handle digits in dname (x6500)
- cgpu_match: More unit tests (dname with digit)
- cgpu_match: More unit tests (dname and case insensitivity)
- Display "NO DEVICES FOUND" line in place of device list, when there are none
- bitfury: Use drv_set_defaults to enable setting baud before probe
- bitfury: Split out SPI port configuration option ("baud") to its own function
- drv_set_defaults wrapper function around cgpu_set_defaults for use with
options that may need to be set during probe
- bitfury: Set poll interval to start iteration before responses are processed
- modminer: Check identification begins with "ModMiner" to avoid false detection
- Bugfix: hashbusterusb: Correct return value of hashbusterusb_vrm_unlock
- Support for installing a udev rules file for Linux
- twinfury: Remove unused variable to silence warning
- cgpu_request_control should be a noop when called from the main thread
- Bugfix: Handle errors creating a vcom devid more gracefully
- Bugfix: _wlog: Allocate enough space for complete copy of log line
- bfsb: Remove unused clock_gettime
- Bugfix: bfsb: Remove useless slot_on which was never properly initialised
- Bugfix: When QueryDosDevice fails, skip trying to parse its (undefined)
results
- hashbusterusb: Voltage should be in volts (not millivolts) for RPC
- hashbusterusb: Provide access to VRM stuff from RPC
- hashbusterusb: Use cgpu_request_control interface to safely access device from
outside main thread
- hashbusterusb: Include Voltage in RPC stats
- Bugfix: hashbusterusb: Ensure unlock code is always allocated, even if null
- hashbusterusb: Abstract code into hashbusterusb_vrm_lock
- hashbusterusb: Abstract code into hashbusterusb_vrm_unlock
- hashbusterusb: Abstract code into hashbusterusb_set_voltage
- Bugfix: hashbusterusb: Check for voltage change error correctly
- Abstract mutex_request code from X6500 driver into generic device API
interface
- hashbusterusb: Use standard identification behaviour
- hashbusterusb: Abstract hashbusterusb_set_colour function
- hashbusterusb: Get voltage with temperature
- hashbusterusb: Clean up unused variable warnings
- hashbusterusb: Use bitfury_wlogprint_status for osc6_bits displaying in Manage
TUI
- Bugfix: hashbusterusb: Remove ignored prompt for VRM lock
- hashbusterusb: Use Manage/osc6_bits code from main bitfury driver
- hashbusterusb: Provide access to VRM and identification in Manage TUI
- hashbusterusb: Shutdown PSU
- nanofury: Support identify function by turning off LED for 5 seconds
- nanofury: nanofury_state structure
- bitfury: Set poll interval to start iteration before responses are processed
- Twinfury: moved voltage reading to the thread init function
- Twinfury supply voltage initial reading: error log improved
- Twinfury: Reading supply voltage on startup
- Voltage scaling for twinfury implemented


BFGMiner Version 3.8.1 - December 9, 2013

- bfgminer-rpc: Catch error when server host fails to resolve to an IP
- RPC: Remove unnecessary delay from RPC server startup
- Call WSAStartup for our own needs independently of libcurl etc
- hashbusterusb: Give more meaningful errors before serial number is known
- hashbusterusb: Populate device_path with USB devid
- Rename hashbuster2 to hashbusterusb (only a-z allowed in driver names)
- Include libusb in options list, since it is no longer tied to specific drivers
- Make hashbuster serial number output match formatting on physical board
- Fix for hashbuster first init after power up
- Workaround Microsoft's non-standard swprintf
- vcom: Fabricate vcom devinfo for any existing paths specified to --scan, in
case enumeration fails
- Bugfix: hashbuster2: Check for errors setting up libusb handle
- Bugfix: Draw statuswin in line order to ensure overflow is cutoff properly
- Fixed one byte stack overflow in mcast recvfrom.
- Bugfix: Let libc do any translation for %lc before adding wide characters to
curses
- Specifically handle mining.get_transactions failures so they get logged at the
lower debug loglevel
- Bugfix: lowlevel: Use LL_DELETE2 when cleaning up secondary list


BFGMiner Version 3.8.0 - December 1, 2013

- Bugfix: lowl-usb.h: Add missing includes for stdbool/stdint
- hashbuster2: Retry writing request if no response received in 100ms
- lowl-usb: usb_ep_set_timeouts_ms function that behaves similar to termios
VTIME (timeout before begin of read/write)
- hashbuster2: Use new lowl_usb_endpoint for i/o
- lowl-usb: Add tools for more reliable read/write using bulk transfers
- Add bytes_extend_buf, bytes_preappend, bytes_postappend for reading direct to
a bytes_t
- New / updated instructions for building bfgminer on Windows
- configure: Adjust header-path discovery to work sanely with spaces and
backslashes in paths
- Bugfix: configure: More fixing BSD sed syntax for curses header search
- bitfury: Reinitialise chips if their frequency drops over 50%
- bfg_strerror: Trim C whitespace off the right of FormatMessage output, since
Windows can add \r\n
- Demote commonish errors to debug loglevel
- klondike: Add support for Avalon2-based designs
- klondike: Remove unnecessary limit of 999 on clock speed displayed in Manage
Device
- Bugfix: hashbuster2: Claim USB device internally
- Bugfix: hashbuster2: Do not try to use lowl-hid.h
- Bugfix: hashbuster2: Close device and free memory allocated, when no chips are
found
- Bugfix: hashbuster2: Remove libusb init and debug level setting
- Bugfix: hashbuster2: Avoid add_cgpu when no chips found
- Bugfix: klondike: Claim USB device internally
- Bugfix: devpath_to_devid: Check stat for error before allocating memory
- Bugfix: lowlevel: Free hash table data when done with it
- Bugfix: bifury: Free memory used by version reply
- bfgtls: Implement destructor to free memory when threads exit
- hashbuster2: Remove unnecessary libusb_detach_kernel_driver
- hashbuster2: Read unique serial number from device
- hashbuster2: Use hashbuster2_io for probe
- hashbuster2: Clean up warnings about unused variables
- README: Document --enable-opencl configure option
- README: Update for HashBuster Micro
- hashbuster2: Integrate into BFGMiner as a separate driver
- hashbuster2: Import driver for new protocol
- Bugfix: nanofury: Check if mcp2210_device exists before trying to power it off
- Bugfix: lowl-vcom: Check for error getting root hub path
- openwrt: Update package description
- configure: Add --without-libusb option to explicitly disable using it
- Bugfix: Pass newlines as ASCII (fixes lack of them in non-unicode builds)


BFGMiner Version 3.7.0 - November 27, 2013

- FTDI scan: Use intptr_t to avoid warning about different size type cast
- Bugfix: proxy: Add missing unistd.h include
- Bugfix: bifury: Precision specifications should be int, not size_t
- Bugfix: klondike: Include config.h first
- Bugfix: binloader: Include config.h first
- README.ASIC: Include support URI for bi*fury driver and firmware
- Added MultiMiner as an example of a GUI application that wraps bfgminer using
the RPC interface
- Silence non-issue warnings
- bifury: Add support for hwerror message
- inc_hw_errors2: Support reporting hw errors without a known nonce
- bifury: Initialise cutofftemp to 75 C
- bifury: Turn chips off and on when disabled and enabled
- bifury: Split out bifury_send_clock
- Bugfix: bifury: Avoid double-free and double-close on version parse errors
during probe
- bifury: Add support for clock command
- bifury: Update for "job" protocol change
- bifury: Update to current git
- bifury: Workaround bugs in older firmware by flooding device with work until
it proves it has needwork
- bifury: Attempt to submit shares even if maxroll limit is ignored
- Clone cgminer's submit_noffset_nonce interface
- Bugfix: bifury: Check that there is a line before comparing it to "version "
- bifury: Prune jobs older than 16 queued, to eventually clean up discarded work
(from flushes)
- Replace ucs2tochar* with ucs2_to_utf8* to handle Unicode
- README.ASIC: Document Bi*Fury firmware upgrade
- bifury: Free work when we know it's complete
- bifury: Implement hashrate reporting using "job" messages
- bifury: Tolerate other data before version reply
- bifury: Abstract line parsing into bifury_readln function
- Bugfix: bifury: Use a char array, rather than pointer to char array, for
bifury_init_cmds
- bifury: Unify SEND devprotodump logging code
- fpgautils: Skip SetCommConfig on Windows if baud is not to be set
- Check for U+2022 and replace it with "*" is unprintable
- Use replacement character for non-printable Unicode
- Use UTF-8 for Unicode
- Implement a utf8_decode function to produce wchar_t needed by curses
- bifury: New driver
- Bugfix: twinfury: Handle flash request for both chips, and avoid using proc
uninitialised
- Bugfix: twinfury: Fix various technicalities
- Bugfix: twinfury: Remove incorrect tcflush
- Twinfury communication protocol changed to be more robust. A preamble is sent
before the actual command.
- LED flashing changed: - setting a flag and flash the LED during the poll
cycle - mutex removed
- Renamed bf2 driver -> twinfury driver bin2hex utility used to convert the
serial number
- BF2 driver comment edited
- BF2 - Twin Bitfury USB miner driver added
- Deprecate --ndevs|-n (redundant with -d? and GPU-only)
- Never abort startup just because we have no devices (there may be cases this
is pointless, but at least it's consistent)
- cgpu_match: Accept ranges for letter processor specification
- cgpu_match: Accept ranges for numeric elements
- test_cgpu_match: Test with more than one device/processor
- configure: Condense configuration options summary a bit
- configure: Put configuration options summary back after everything completes
- Workaround bug in MinGW-w64: Check for strtok_r to be defined at compile-time,
and don't override it unless we really want to override
- Bugfix: configure: Use new need_lowl_vcom instead of need_fpgautils
- configure: Explicitly check for sleep
- Bugfix: Set LIBUSB_LIBS for non-pkgconf non-header-subdir libusb installations
- Move unused winsock2.h includes to the end of config.h
- Use lround instead of llround, since it has better compatibility with older
MingW and Cygwin versions
- lowl-hid: Save and use hid_enumerate results from library test
- Silence Windows build warnings
- mcp2210: Remove cruft leftover from HID code (moved out)
- lowl-vcom: sysfs scan: Simplify maybe_strdup into _sysfs_do_read
- lowl-vcom: sysfs scan: Don't bother getting product string until we confirm it
is in fact a tty device
- input_pool: Accept a null password
- Bugfix: Move const data into the scope it needs to be in
- Bugfix: Restore case insensitivity to --scan driver names
- Accept "@" separator for serial/path in --scan to match --device and
--set-device better
- README: Uppercase the sequence letter when talking about multiple pools
- README: Mention "make install" and clarify saving settings
- Bugfix: avalon: Don't "probe" with -S <path/serial>
- bitforce: Add lowl_* to bitforce_queue so it can be specified by name as a
driver
- Bugfix: devpath_to_devid: Be strict about COM port specifications on Windows
- Bugfix: avalon: Don't "probe" with -S all
- Bugfix: Only count devices in -d?
- RPC: {dev,proc}details: Add 'Processors', 'Manufacturer', 'Product',
'Serial', 'Target Temperature', 'Cutoff Temperature'
- debian: Need to explicitly add opencl support to build.
- Correctly document klondike as being enabled by default
- Simplify logic for README.ASIC and README.FPGA install
- Split fpgautils into lowl-vcom and binloader, and fix internal build
dependencies
- Add README.CPU to "make install" distribution when built with CPU mining
support
- line 2913 added urlencode
- Bugfix: RPC: Release apisock on error in tidyup
- klondike - dont try to flush if not initialised
- Rename --scan-serial to --scan
- Bugfix: Handle invalid driver names cleanly
- Workaround libcurl bug to properly support HTTP proxies for stratum
- Bugfix: Write klondike options for klondike-options (not icarus options)
- README.OpenWrt: Change example repository to "latest", and document
alternatives
- mcp2210: Add support for --device-protocol-dump
- Bugfix: Initialise dynamic osc6_bits variables
- README: Fixed a few typos here and there and improved wording (Thanks
miningpenguin!)
- README: Moved CPU sections to README.CPU and elaborated more on it
- README*: Grammatical cleanups
- README.ASIC: More KnCMiner
- README.ASIC: Add section about KnCMiner
- Bugfix: opencl: Dynamic mode should disable threads for this device, not just
N after the first
- Bugfix: Make curses_input return NULL on a blank line, as most callers expect
- Duplicate (hidden) --userpass option before --pool-priority so it can be used
in config files
- Only probe VCOM devices on bare "all" scan-serial request
- Provide backports of uthash LL_{PREPEND,FOREACH{,_SAFE}}2 (only added in
1.9.7, not yet in major distros)
- Upgrade required uthash version to 1.9.4 for LL_CONCAT
- README: Update documentation for scan-serial
- README: Bitstreams no longer included with BFGMiner source
- README: Remove incomplete and unnecessary list of ASIC/FPGA devices
- write_config: Add scan-serial and set-device
- write_config: Update to make JSON Array of named parameters
- Remove support for comma-separated values in --device, and update
documentation
- lowlevel: Collapse multiple lowlevel drivers on the same devid to a secondary
linked list, and only spawn one thread to probe all lowlevels on a given devid
- Bugfix: vcom_devinfo_scan: Clean up hashtable when done
- README: Update cgminer driver FAQ with Windows-specific answer, now that we
have a workaround for *nix
- cpu/opencl: Always disable by default; removes deprecated -G option entirely
- vcom_lowl_probe_wrapper: Attempt to reattach detached USB devices
- Bugfix: erupter: Prioritise Emerald after Sapphire
- Bugfix: Allow "drv:auto" to override general "noauto"
- Bugfix: _probe_device_match: Fix inverted logic
- Bugfix: Don't try to call lowl_probe for drivers that don't support that
interface
- lowl-hid: Use usb devids for libusb-based hidapi devices
- Replace bfg_claim_hid with lowlevel_claim
- lowlevel: Generic claim interface for lowlevel info
- cgpu_match: Compare dev_t under paths
- Rework -d? output to display more useful information now that device ordering
is non-deterministic
- cgpu_match: Add support for matching by serial number or path
- Unit tests for cgpu_match
- Rework --device option to accept a pattern and JSON Array in config; removes
support for processor ranges
- Remove --remove-disabled option, as it conflicts with hotplug, per-processor
stuff, etc already
- Bugfix: Reimplement "noauto" flag
- Bugfix: Restore "-S foo" without driver name functionality
- Bugfix: scan-serial: Compare dev_t as well
- littlefury: Convert to lowl_probe
- hashbuster: Convert to lowl_probe
- avalon: Convert to lowl_probe
- cairnsmore/erupter/icarus: Convert to lowl_probe
- bigpic: Convert to lowl_probe
- ztex: Convert to lowl_probe
- x6500: Convert to lowl_probe
- nanofury: Convert to lowl_probe
- modminer: Convert to lowl_probe
- klondike: Convert to lowl_probe
- bitforce: Convert to lowl_probe
- fpgautils: Wrapper to easily adapt an old detectone to new lowl_probe
- lowlevel: Add match variants of detect functions
- DevAPI: add_cgpu: Use mutex to ensure thread safety
- Make detectone_meta_info thread-local
- New threaded device probe framework


BFGMiner Version 3.6.0 - November 12, 2013

- RPC: Bump to 2.2 for Works in POOLS
- Bugfix: klondike: Don't try to free off the stack
- configure: Update klondike checks for libusb
- klondike: Autodetect by VID/PID/Manufacturer, rather than too-short "K16"
Product search
- Remove accidentally added ASIC-README
- klondike: Remove noop identify function
- klondike: Replace deprecated statline with temperature and ManageTUI stuff
- --shares should be scaled to diff1 not absolute number of shares
- More README updates.
- Minor README updates.
- sha2 allow external access to some macros and the K array
- klondike: Fixed a math issue when reporting fan speed on the status line.
- Add a get and queue helper work function.
- Reset the work_restart bool after the scanwork loop in case the driver flushes
work synchronously.
- Get rid of the stage thread since all work can be asynchronously added now via
hash_push anyway.
- Fix for opt_worktime on big endian machines.
- Do get_work in fill_queue without holding other locks.
- Make hash_pop signal the work scheduler each time it waits on the conditional
that it should look for more work.
- Remove discarded work from quota used.
- Display works completed in summary and API data.
- Store how many work items are worked on per pool.
- Add the ability to add uint8 and uint16 entities to api data.
- klondike - initialise stat_lock
- klondike - better to unlock locks than to lock them twice :)
- Remove roundl check and define
- 'llround' is more suitable here than 'roundl'
- klondike - change options to clock and temptarget only
- klondike - fix another uninit dev warning
- klondike - downgrade 'late update' but add an idle detect - and correct error
levels
- klondike - fix isc uninit warning
- klondike - drop the device for hotplug if it's unresponsive
- klondike - single 'shutdown' and ensure it happens
- klondike remove SCNu8 - unsupported on windows
- klondike - fix uninitialised dev bug
- Don't attempt to disable curses or print a summary during an app restart to
prevent deadlocks.
- klondike - error condition handling
- Modify Makefile to only include opencl related code when configured in.
- Convert opencl to need to be explicitly enabled during build with
--enable-opencl
- Implement a cglock_destroy function.
- Implement a rwlock_destroy function.
- Implement a mutex_destroy function.
- Simplify queued hashtable by storing unqueued work separately in a single
pointer.
- Add cgminer compatibility macro for ms_tdiff
- klondike rewrite work control
- allow __work_complete() access
- miner.h allow devices to tv_stamp work
- klondike - can only calculate the nonce difference on or after the 2nd nonce
- klondike - correct/reverse min/max stats
- klondike: Remove unnecessary devlock
- klondike - use a link list queue rather than a circular buffer - and add
timing stats
- Klondike - increase circular read buffer size
- Klondike - extra zero value and range checking in temp conversion
- klondike - display MHz also
- klondike correct cvtKlnToC() temperature calculation
- klondike - correct 1st reply debug based on define
- klondike - debug dump structured replies
- klondike - avoid division by zero if maxcount is unexpectedly zero
- klondike store and report errorcount and noise
- klondike - fix chipstats api stats buffer overrun with 16 chips
- klondike add new nonecount only once
- klondike - report mh/s based on nonces found + put old estimate into API stats
- klondike use a memcpy
- klondike fix bracket tabs indenting
- klondike: Update code to current git
- Klondike update code to current git
- Add Klondike to README
- Add Klondike to README.ASIC
- Klondike to main directory
- Klondike consistent code spacing
- Klondike update driver code to current git
- klondike: update firmware for 16 chips, add dist files
- klondike: beta final 0.3.0 release
- klondike: updated firmware, IOC method
- klondike: prevent nonces when not state W
- klondike: added driver config option support
- klondike: fixes for 300 MHz, fix K1 parts list
- klondike: update driver, docs
- klondike: update firmware & utils
- klondike: updated cgminer driver for 3.3.1
- klondike: update firmware and driver, create new cgminer fork
- update klondike driver
- klondike: add cgminer driver file as-is


BFGMiner Version 3.5.2 - November 12, 2013

- README.scrypt: Update to reflect current status of code (unmaintained); remove
Con's litecoin donation address (leaving his bitcoin one) since it is unknown if
he still accepts donations with litecoin
- Bugfix: minerloop_async: Check the correct _mt_disable_called flag
- bitforce: Allow ZCX response to override Manufacturer string
- Bugfix: RPC: Restore null termination on responses
- Bugfix: configure: We need DLOPEN_FLAGS for lowlevel hid too
- Add additional debug information to help track work through BFGMiner
- README: Update hidapi dependency for HashBuster
- Bugfix: bigpic: Convert device serial and nonces to host endian
- Bugfix: modminer: Ensure devices that fail probe are closed properly
- Bugfix: bitforce: Ensure devices that fail probe are closed properly
- Bugfix: littlefury: Ensure devices that fail probe are closed properly
- Bugfix: bigpic: Ensure devices that fail probe are closed properly
- nanofury: Attempt to be more resilient to problems


BFGMiner Version 3.5.1 - November 7, 2013

- Bugfix: make-release: Add README.GPU document
- Demote USB string fetch failure to LOG_DEBUG since it is rather common
- Bugfix: RPC: devscan shouldn't be available to read-only access
- Bugfix: bigpic: Ignore the bitfury chip's counter as best we can
- Bugfix: bigpic: Accept other delimiters in Bitfury BF1 product string in
autodetection
- Bugfix: Fix VCOM/fpgautils build check
- Bugfix: Only include VCOM code when VCOM/fpgautils support is being built
- Bugfix: Reimplement scan-serial "all" keyword
- Bugfix: bitforce detect: Close device after ZGX failure
- Bugfix: Define lowl_usb even if libusb support is omitted, since VCOM and HID
drivers check against it for warnings


BFGMiner Version 3.5.0 - November 6, 2013

- bigpic: Probe sooner than most drivers, but still after icarus/erupter
- cpu/opencl: Fix probe priorities to be last
- Bugfix: RPC: Correct per-device Work Utility to be per-minute instead of
per-second
- Bugfix: Fix Windows VCOM enumeration to work with new lowlevel code
- Bugfix: nanofury: Use maybe_strdup in case strings may be missing
- Bugfix: bitfury: Fix processor disable/enable for all bitfury-based devices
- hashbuster: Get temperature when available
- Bugfix: hashbuster: Use maybe_strdup where there might not be a string
- hid: Treat null-length strings as missing entirely
- hashbuster: Enable dynamic osc6_bits
- hashbuster: New driver
- Split a hid lowlevel out of mcp2210
- ztex: Convert to use lowlevel usb enumerator
- A quick flag to allow drivers to convey the desire to rescan devices (from
lowlevel up)
- Lowlevel USB enumerator for libusb
- dname for lowlevel drivers
- Bugfix: lowlevel: Avoid null pointer dereference on devices that are missing
USB strings
- lowlevel: Add a userpointer to lowl_found_devinfo_func_t and use it for
serial_autodetect
- Rework VCOM autodetection to go through lowlevel interface, avoiding repeat
USB string fetching
- lowlevel: Keep track of the claimed devid and debuglog every found device
- ft232r: devinfo_scan: Don't skip claimed USB devices
- ft232r: Be more tolerant of USB open failure or missing strings
- RPC: Build most of CONFIG "Device Code" by iterating over registered driver
list
- drv_detect_all: Use priority-sorted list of registered drivers
- Build hash tables to find drivers by dname or name
- Build a linked list of registered drivers
- BFG_REGISTER_DRIVER macro to commonly pre-define device_drv structures
- Move have_libusb checks out of drv_detect_all
- Replace opt_nogpu with simple function that adds opencl:noauto to scan-serial
list
- opencl: Remove ancient gpu_threads variable, not really needed anymore
- Bugfix: Stop waiting for pool testing as soon as one is active
- bitfury: Clean up by making private functions static, and naming public ones
with [lib]bitfury_ prefix
- bitfury: Remove old (unused) driver code
- bitfury_gpio: Convert to using current bitfury driver code
- Bugfix: littlefury: Upgrade to use current bitfury driver (old one didn't work
with littlefury anymore anyway)
- Bugfix: test_work_current: Make hexstr buffer large enough for blkhashstr
later on (issuing old work msg)
- README: Document --enable-knc configure option
- README: Document --disable-nanofury configure option
- Windows autodetect: clear detectone meta info
- Check for Windows DDK headers, and where they are (and build without them if
unavailable)
- Windows SetupAPI-based detection for USB VCOM devices (tested with CP210x and
CDC)
- ucs2tochar{,_dup} functions to convert USB string descriptors to char* format
- bfg_strerror: Support for Windows system errors
- Introduce applogfail* macros
- Bugfix: scrypt: Add missing include stdbool.h
- Bugfix: Explicitly cast uses of be32toh to uint32_t
- Bugfix: Add missing includes of config.h, stdbool.h, and stdint.h
- lowlevel: Convey device manufacturer up to nanofury cgpus
- nanofury: Store device HID path for RPC
- lowlevel: Promote path to a normal element for devices to simplify things a
bit
- nanofury: Claim mcp2210/hid devices
- mcp2210: Implement claim on HID paths
- fpgautils: Use string identifiers for internal hardware claims
- ztex: Keep interface claimed as a lock
- Bugfix: mcp2210: Check for NULL hid device strings before trying to convert
them to ASCII
- FTDI autodetect: Enable populating USB product and serial number
- Bugfix: FTDI autodetect: Add missing parameter values and remove unused buffer
- Bugfix: bigpic: Don't active poll event without a poll function


BFGMiner Version 3.4.0 - October 26, 2013

- Bugfix: knc: Use separate DEV_RECOVER_DRV deven when doing automatic core
disable/re-enable, so user-initiated disables are left alone
- Document existing enum dev_enable usage
- Bugfix: knc: Only try to re-enable cores after we've actually asserted them as
disabled, otherwise we won't actually assert the enable either
- knc: Automatically disable and re-enable problematic cores
- AUTHORS: Add Dmitry Sorokin
- bitfury: Disable dynamic osc6_bits when manually setting a specific value
- bitfury_do_io: Make use of timer_elapsed
- bitfury: Only use dynamic osc6_bits with boards that support it explicitly
(BFSB and Metabank for now)
- bitfury: More debugging info for dynamic osc6_bits
- Bugfix: bitfury: Fix tv_stat to persist
- bitfury: Remove useless debugging
- bitfury: Simplify dynamic osc6_bits logic such that the range is defined in
one place
- bitfury: Remove unused skip_stat
- Bugfix: bitfury: Stick to tracking best_done per-chip, and never call
zero_stats (which is for users, not drivers)
- Bugfix: bitfury: Use proc_repr rather than incorrectly calculated chip_id
- Bugfix: bitfury: struct bitfury_device is already chip-specific
- bitfury: dynamic osc_6 bits
- bitfury: Improve frequency calculation - fixes occasional miscalculations as
well as makes it safer with multiple devices
- bitfury: Added frequency calculation
- tm_i2c: Corrected copyright
- Allow --set-device opt=val without a device specification to attempt setting
it on every device
- Bugfix: knc: Maintain queue_full for all cores, so they continue to queue work
even if the first is disabled
- bitfury: Allow setting osc6_bits up to 60
- Bugfix: Set status to LIFE_DEAD2 when killing threads at shut off, to avoid
calling driver code
- Skip "testing stability" message at startup
- Try switching pools if for some reason we end up with only idle pools and have
ended up current_pool set to an idle one.
- Check a pool is stable for >5 mins before switching back to it.
- ManageTUI: Slash key performs processor selection by search
- nanofury: Populate dev_product and dev_serial
- mcp2210: Implement mcp2210_close
- Bugfix: mcp2210: hid_write needs a report id, especially on Windows
- mcp2210: Workaround some Windows snprintf not handling wide strings correctly
by simply copying character-per-character (only works for ASCII data)
- Bugfix: chroot: Check that chdir succeeds
- AUTHORS: Add pontus
- knc: Expose Voltage and DCDC Current to TUI Manage device
- knc: Expose Voltage and DCDC Current to RPC status
- knc: Store volt/current on knccore
- knc: Read voltage/current from DCDCs
- Bugfix: knc: Fix temperature readout of half-celcius
- Bugfix: Only define have_libusb if building with libusb support
- littlefury: Remove unused code
- bitfury: RPC procset: Ignore extra data (like newline) after numbers
- Add --set-device option to allow setting default procset commands
- README: Document hidapi dependency for NanoFury sticks
- AUTHORS: Include Vladimir Strinski for NanoFury code
- mcp2210: Set GPIO output mode atomically with their output values
- nanofury: Power off device when shutting down
- make-release: Include libhidapi-0.dll
- mcp2210: Port to Windows
- configure: Find hidapi.h for mcp2210 using pkg-config
- bitfury: Provide read/write access to osc6_bits from the Manage TUI
- nanofury: Reduce oscillator bits to 50 to stay within USB specs
- bitfury: If multiple integers differ after 4 tries, just go with the first so
we can start mining
- nanofury: Implement actual mining code
- nanofury: Turn off device after checkport
- nanofury: New driver; detect device
- mcp2210: Implement protocol required for NanoFury USB sticks
- mcp2210: Skeleton low-level driver for MCP2210 USB to SPI Master bridge
- ft232r: Use lowlevel interface for ft232r_open
- Abstract ft232r scan+probe interface into new generic lowlevel driver
interface
- configure: Error if knc driver is requested, but linux/i2c-dev.h is missing or
not from i2c-tools
- knc: Attempt to express core enable/disable to controller
- knc: Put knc_device on every processor device_data
- Refactor device disable/enable logic so that drv.thread_{disable,enable}
actually get called
- Bugfix: knc: Check that device actually has work queued, before trying to find
the most recent one
- knc: Read temperature sensors
- DevAPI: minerloop_queue: Run watchdog in device thread
- knc: Pass queue flush to device when its most recent job produces stale shares
- knc: Issue flush command at init
- Bugfix: knc: Perform le32toh on unknown-work nonces
- knc: Use independent device_id for works to enforce 15-bit size
- Bugfix: spi_emit_nop: Correct counter logic
- knc: Implement mining
- knc: Use FPGA i2c to identify present ASICs
- knc: Basic detection of boards on expected i2c buses
- DevAPI: generic_detect: Just use an enum for flags
- Use list of drivers/algos/options generated by configure in --help info
- miner.php correct sort gen field names largest to smallest
- api ... the code related to device elapsed
- api add device elapsed since hotplug devices Elapsed is less than cgminer Elapsed
- RPC: Include more info in per-device/processor status
- API add 'MHS %ds' to 'summary'
- Icarus remove unneeded opt_debug tests due to applog being a macro
- We should only yield once in cg_wunlock
- Provide a function to downgrade a cglock from a write lock to an intermediate
variant.
- Reset quotas on load balance for all pools at the same time to avoid running
out during selection and unintentionally dropping to fallback.
- Break out of select pool from a common point for appropriate debug messages
and to avoid further tests.
- Find the greatest common denominator in quotas and use the smallest number of
consecutive work items per pool in quota load balance mode to smooth hashrate
across pools with large quotas. Give excess quota to priority pool 0 instead of
pool 0.
- Add subdir-objects to automake options.
- Use the --failover-only flag to have special meaning in combination with
load-balance mode to distribute any unused quota back to pool 0 to maintain
ratios amongst other pools.
- Display quota and allow it to be modified via the pool menu.
- More README about quotas.
- Document quotas and new load-balance strategy.
- Add API commands and modify output to support pool quota displaying and
changing.
- Change message in status when using a balanced pool strategy to notify if
there's a stratum pool as well.
- Add quota support to configuration files.
- Rotate pools on all failures to set a pool in select_pool.
- Use quotas for load-balance pool strategy.
- Provide a mechanism for setting a pool quota to be used by load-balance.
- Change --socks-proxy option to default to SOCKS5
- Cope with trailing slashes in stratum urls.
- Make extract_sockaddr set variables passed to it rather than pool struct
members.
- miner.php sort the mcast rigs so they are always in the same relative order
- miner.php allow sending the muticast message multiple times
- miner.php mcast ignore duplicate replies
- miner.php coding warning
- miner.php disable 'gen' by default
- miner.php allow formula generation of new fields
- miner.php add doctype
- miner.php remove incorrect echo
- miner.php optional error if not enough mcast rigs are found
- take_queued_work_bymidstate should use a write lock.
- API mcast add a description option with miner.php
- Skip dissecting opt->names in parse_config if it doesn't exist.
- ICA optional limit timing with short=N or long=N
- logging - applogsiz() for large messages
- Provide a funcion that looks up queued work by midstate and then removes it
from the device hash database.
- Wait until all pools are done testing before giving up, regardless of how long
they take to fail
- AUTHORS: Add Ricardo Iván Vieitez Parra and Paul Wouters
- Bugfix: Check that setgid succeeds
- When using --chroot, chdir to the new root
- Bugfix: Add missing drivers to --help list
- Bugfix: Zero stats: cgpu->diff_stale
- fpgautils: serial_close: Explicitly release advisory lock before closing, in
case fd has been inherited by a process forked by system()
- Use serial_close to pair with every serial_open
- Workaround bug in Plibc by resetting locale to "C" at startup
- Bugfix: bitfury: Check for necessity of linux/i2c.h so build succeeds with
i2c-tools's userspace linux/i2c-dev.h
- bitforce: Workaround bugs in current firmware for the Chili
- Bugfix: DevAPI: Reduce race-collision delay to 1ms so thread_shutdown actually
gets called before threads are killed forcefully
- Bugfix: configure: Use AC_SYS_LARGEFILE to ensure nonce/share log files can
safely grow bigger than 2 GB
- Bugfix: Correct argument type for --submit-threads option
- littlefury: Workaround Xcode bug initialising fields in anonymous unions
- Bugfix: write_config: Make intensity list writing more readable, and avoid
extraneous argument in dynamic intensity case
- DevAPI: Trigger mt_disable_start after init, if a device is disabled before
minerloop starts
- icarus: Skip sending new work if entering DEV_RECOVER* modes
- icarus: When disabling, close device fd and stop sending new work
- RPC: Use get_api_extra_device_status for full-device status, for devices with
only a single processor


BFGMiner Version 3.3.0 - October 11, 2013

- openwrt: Optional libevent support
- RPC: Add missing drivers to Device Code
- bigpic_process_results: Cleanup
- RPC: Use procs count for device summaries, rather than iterating over linked
list (which may span multiple devices)
- Bugfix: Use bfg_waddstr for cg_[mv]wprintw so special characters get
interpreted properly
- Bugfix: bitfury: Clear force_reinit flag after reinit
- Bugfix: Use base unit for zero, and only if all values are zero
- RPC: Always build pga* and proc* methods
- Bugfix: icarus: Check for valid fd before all usage
- Bugfix: Stratum initiate: Clear json var after freeing it, to avoid a
potential double-free if retry fails before new JSON is parsed
- Bugfix: Correct --log-file error message
- Cleanly fall back to other micro- prefix symbols if locale doesn't support the
preferred one(s)
- Bugfix: bfg_waddstr: Missing break after selecting degrees symbol
- Silence warning about (never really) uninitalised variable use in notifystatus
- RPC: Complete split between devs/pga* and proc* methods
- RPC: Internal restructuring to support device-wide view
- RPC: Remove devdetail method, and rework newer devdetails to use its code
- configure: Advise running ldconfig when detected and probably necessary
- configure: Simplify final information summary
- Bugfix: configure: Disable httpsrv/libevent if not available
- README: Mention free GPU mining dependencies
- Write config: Avoid writing default temperature settings
- bitforce: Set default cutoff temperature to 85C for SC-class devices
- When shutting down, don't wait for mining threads any longer after the 1
second sleep
- bitfury: Silence warning about (never possible) uninitialised variable use
- bigpic: Handle write failures
- json_rpc_call_completed: Silence incorrect type cast warning
- icarus: Silence warning about (never really) uninitalised variable use in
icarus_scanhash
- fpgautils: Check for fgets error
- Silence warning about (never really) uninitalised variable use in
multi_format_unit
- ft232r: Silence warning about (never really) uninitalised variable use
- Silence unused result warnings for notifier_{read,wake}
- Log a warning if --cmd-* returns a non-zero exit code
- configure: Update bigpic driver dependency on bitfury code
- metabank: Initialise --temp-cutoff to 50C
- README.ASIC: Document special care needed for some bitfury-based miners
- Bugfix: bitfury: Correct results from RPC pgaset
- bitfury: Move Slot and fasync RPC info to details instead of status
- bitfury: Include chip fasync in RPC status
- bfsb: Split up processors among a separate device per board
- Bugfix: bitfury: Copy rxbufs to stack in case we need to do SPI communication
in the meantime
- bfsb: Merge bfsb_detect_chips into bfsb_autodetect (unchanged)
- bfsb/metabank: Allow pgaset to change osc6_bits and SPI baud rate
- bitfury: Fix code indentation
- bitfury: bitfury_init_oldbuf: Optimise during runtime
- metabank: Remove unused variables
- bitfury: Send a work with lots of nonces to help cold-started bitfurys fill a
static buffer
- Bugfix: configure: Show --enable-bfsb/metabank in help, since they are
disabled by default
- metabank: Reduce i2c banking to only when necessary
- bfsb: Only build spi_bfsb_select_bank if bfsb driver is being compiled
- bitfury: Reorganize polling to hit chips sequentially, so SPI traffic can be
minimised
- bitfury: spi_emit_data: Return address read data will be located at after txrx
- bitfury: After 8 bad nonces in a sample period, reinit immediately rather than
waiting for the remaining up-to-0x38
- bitfury: Reinitialise chips if their active nonce stops changing
- bitfury: Recalibrate immediately when we know we need it
- bitfury: Reset chips if more than 8 hw errors are found in a 0x40 result
sample period
- bitfury: If previous nonce mismatch persists, try recalibrating oldbuf
- bfsb: Shutdown chip when disabling
- bfsb: Expose Clock Bits and Slot to RPC
- configure: Simplify dynclock necessity detection
- configure: Tie libudev usage to fpgautils
- configure: Simplify fpgautils necessity detection
- DevAPI: add_cgpu_slave for more elegant multi-device threads
- Use procs count for device summaries, rather than iterating over linked list
(which may span multiple devices)
- metabank: Split up processors among a separate device per board
- metabank: Merge metabank_detect_chips into metabank_autodetect (unchanged)
- Removed temperature output from metabank_api_extra_device_status().
- Modified code to store temperature at cgpu->temp for metabank devices.
- bitfury: Added get_api_extra_device_status for 'devs' request in metabank
driver: Slot, Clock Bits, Temperature, Voltage.
- minerloop_async: Run watchdog code within actual device thread
- bitfury: Remove unused libbitfury_readHashData
- Bugfix: DevAPI: Don't call job_process_results when there was no previous job
- bigpic: Convert to async minerloop
- bitfury: Port to Windows
- bigpic: Use bitfury_fudge_nonce
- Use common bitfury_decnonce for all bitfury-based devices
- Rename bf1 driver to bigpic, as the same device has other brands too
- bf1: Clean up log messages
- bf1: Reduce loglevel of debug messages
- Bugfix: bf1: Add missing header to Makefile.am, and fix .dname/.name
- Bugfix: bf1: Fix warnings
- BF1 driver modified to work under Windows -> packing of structs isn't working
with Windows
- Corrected hash rate estimation for BF1. Only 756 out of 1024 nonces are
scanned.
- Cleaning up the bf1 driver code
- BF1 driver working
- Bitfury BF1 source files added
- bfsb: modified to use LukeJr:'s new code
- configure: Reorder output
- configure: Allow to build *fury drivers only
- bitfury: Turn commented debug stuff into #ifdef BITFURY_SENDHASHDATA_DEBUG
- bitfury: Implement queue_full to ensure all processors have a work ready
before scanwork
- bfsb: set api speed to 625khz
- initial support for bitfurystrikesback boards
- bitfury: LINE_LEN instead of 2048
- bitfury: 4Mhz SPI by default
- bitfury: double SPI polling
- bitfury: +Strange Counter -printf Counter
- bitfury: tuning of parameters; fixed cycles calculation
- bitfury: Move clock increase from common code to metabank driver init
- bitfury: Add driver-bitfury.h for shared function declarations
- bitfury: Do debug logging of read data before rotation
- bitfury: Decode nonce array sooner to make debugging easier
- bitfury: Check that the previous nonce still matches, to detect response
corruption
- bitfury: Workaround corruption by looking for matches rather than changes
- bitfury: Rewrite using async minerloop (currently only setup on metabank
driver)
- bitfury: Fix memory issues
- littlefury: Turn off chips when exiting
- littlefury: Adapt to 16-bit payload size (protocol change)
- Bugfix: littlefury: Fix bitfury_do_packet
- bitfury: Report bad nonces properly
- bitfury: Unify common nonce fudging code
- Bugfix: bitfury: Chips only scan 0xbd000000 nonces per work
- bitfury: Fix logging to use applog
- bitfury: Split driver into bitfury_gpio (bare GPIO) and metabank (i2c banked
GPIO)
- littlefury: Use bitfury driver scanwork
- bitfury: Eliminate more static variables
- bitfury: Treat each chip as its own processor
- bitfury: Resolve devices[chip] only once per chip
- bitfury: Move second_run logic back to libbitfury
- bitfury: Loop over chips once during scanwork
- bitfury: Abstract hashes_done2 which keeps track of time deltas per thr on its
own
- littlefury: Need to set tv_morework
- bitfury: Abstract out payload_to_atrvec
- littlefury: Log read return value when unexpected
- bitfury: Eliminate non-const global variables
- littlefury: Safeguard on job switching
- Bugfix: littlefury: Keep reading until error, EOF, or buffer filled
- littlefury: Log devproto of incomplete reads
- Enable littlefury detection
- Bugfix: configure: Enable bitfury by default properly
- bitfury: Require explicit -S bitfury:auto to probe GPIO-based SPI
- bitfury: Move i2c slot handling to metabank-specific driver code
- littlefury: Initial driver for BitCentury's USB miner
- bitfury: Split actual chip detection into simple function
- Bugfix: bitfury: Fix driver "name" to be correct length
- bitfury: Abstract SPI interface
- Bugfix: bitfury: Fix more warnings
- Bugfix: bitfury: Fix warnings
- bitfury: Intercept and use applog for perror calls
- Bugfix: bitfury: Handle SPI init failure cleanly
- bitfury: major intermediate update
- bitfury: added chip series detection; multiple chip mining
- Bitfury ASIC initial support
- DynClk: Improve commented documentation
- Replace Utility with (expected) Income calculated by actual shares submitted
in 100% PPS value
- format_unit3: BTC formatting with 2 decimal place digits
- format_unit3: Support for nano- and pico- sizes
- format_unit3: Use an enum for float-precision parameter
- format_unit2: Support milli- and micro- unit prefixes
- opencl: Disable by default if other devices are found; to enable, use -S
opencl:auto
- write_config: Save request-diff option
- Stratum: Clear unused extranonce2 space
- Don't even show 'Attempting to restart' for devices that don't support it
- Workaround bug in PDCurses wresize
- Bugfix: Include config.h in sha2.c first
- make-release: Include libevent-2-0-5.dll in Windows packages
- README: Document dependency on libevent
- README: Document new --chroot-dir and --setuid options
- Bugfix: Use correct configure define for chroot
- Remove --disable-chroot build option: always compile --chroot-dir if supported
- Bugfix: Use correct configure define for pwd.h
- Improvements on code
- Update miner.c
- Added basic chroot support, added option to configure.ac.
- Updated miner.c
- Added basic chroot support
- Replace u-hashrate with nonce-based hashrate adjusted for rejects/stales
- SSM: Windows port
- SSM: Allow configuring stratum port via --stratum-port option and RPC
setconfig
- SSM: Implement mining.hashes_done extension
- Proxy: Catch invalid usernames and error
- SSM: Report hashes done based on share submissions
- SSM: Include current time in job ids to avoid false hardware errors due to job
id reuse
- SSM: If no notify is currently set, try to set it before refusing a subscribe
- SSM: Prune old jobs after expiry
- SSM: Use pool data read lock when subdividing notify
- SSM: Gracefully fail when upstream stratum notify cannot be subdivided
- SSM: Gracefully fail when upstream pool is not stratum (by closing subscribed
clients, and refusing to subscribe new ones)
- SSM: Properly fail cleanly when maximum clients are connected
- SSM: Clean up stratumsrv_job when pruning it
- SSM: Avoid responding to notifications, and give an error for unknown methods
- SSM: Propagate work updates to clients
- Mostly functional stratum proxy driver
- Stratum: Split actual work generation away from the current pool data
- Bugfix: Stratum: Dereference pool swork coinbase buffer inside data lock
- SGW: Split proxy code out from driver-getwork into driver-proxy
- Bugfix: miner.php: Check $dototal[$name] is set before comparing its value
- Bugfix: RPC: Use bad_nonces in Hardware% instead of generic hw_errors
- Bugfix: RPC: Handle LIFE_DEAD2 case
- Make failure to open sharelog or noncelog abort startup
- Nonce logging option --noncelog to simply store every nonce and its info
- Abstract --sharelog option parsing


BFGMiner Version 3.2.1 - September 19, 2013

- Only show long-poll message in pool summary if it's not using stratum.
- README.ASIC: Clarify syntax of --scan-serial usage for USB Erupters
- Bugfix: RPC: Defer allocation of apisock until after we check for --api-listen
- make-release: Only try to include libmicrohttpd if bfgminer.exe depends on it
- Bugfix: make-release: Include libplibc-1.dll if available
- SGW: For Windows builds, include winsock2.h instead of POSIX networking
headers
- configure: Display getwork proxy server support in summary
- Bugfix: SGW: Pass actual cgpu_info to prune_worklog_thread instead of silently
casting one from getwork_client
- Bugfix: Get total_staged with lock for TS stat, before getting console lock
- Bugfix: bitforce: Correct fanmode RPC help
- bitforce: Hide fan control when disabled in firmware
- Bugfix: bitforce: Correct fanspeed TUI setting
- Bugfix: logging: Allow up to 4 KB for log lines
- Bugfix: icarus: Ensure last2_work exists before trying to check nonces fit it
- README.OpenWrt: Include serialusb drivers
- README: Include OpenWrt serialusb driver package names
- Bugfix: Initialise notifier (as invalid) for no-thread devices (SGW)
- Bugfix: Free temporary kernel path copy when writing config file
- Bugfix: Put kernel path on the (main) stack after initialisation from
commandline/config, to avoid appending an argv or jansson string
- Bugfix: Always allow startup with curses enabled (since the user can use
Manage devices to add new ones, and display Ctrl-C for text-only quit help
- Bugfix: Ignore/reject libmicrohttpd before 0.9.5, which introduced symbols we
need
- README: Elaborate on format of BW
- Bugfix: Try to initialise libusb later, so any mutexes applog might need are
initialised
- Bugfix: Implicitly initialise timer_set_now when it is first called
- util: Eliminate unsafe const-removing casts
- configure: Cleanup CFLAGS/LDFLAGS display
- Show RT_LIBS in ./configure output.


BFGMiner Version 3.2.0 - August 29, 2013
- cpu: sse2_64: Rename sha256_init to sha256_init_sse2 to avoid conflict with
new sha2.c
- httpsrv: Some older versions of libmicrohttpd need stdint.h included first
- make-release: Include libmicrohttpd-10.dll if it exists
- Fixes column alignment in decimal fields. Workaround for printf rounding up
when formatting decimals into limited width.
- New hidden --unittest option. No longer runs unit tests at startup by default,
for faster startup. Added unit test for width printing of decimal numbers.
- Bugfix: configure: More fixing BSD sed syntax for curses header search
- Bugfix: configure: More fixing BSD sed syntax for libusb header search
- README: Update solo mining docs
- erupter: Continue searching a job until the end, even if an earlier result is
found
- icarus: Do hwerror-triggered reopen before sending the next job the first
time, to avoid having to resend it later
- icarus: Avoid sending a new job if the nonce found was for one before the
current job anyway
- icarus: Double-buffer work to solve nonces found before work change takes
effect
- icarus: Abstract nonce processing
- Bugfix: icarus: Avoid trying to submit 0 on comms error
- icarus: Skip unnecessary nonce memcpy
- icarus: Make state->last_work a pointer and store it on the heap
- miner.php fix missing global
- Bugfix: erupter: After identify, skip starting work if next scanhash is
already decided to be a "first run" (eg, device errors)
- Bugfix: erupter: Fix identify following hw error
- Bugfix: icarus: Don't try to send work if device open failed
- Debug log when zeroing stats
- Upgrade libblkmaker to 0.3.2
- Bugfix: GBT: Advertise coinbasevalue capability
- Bugfix: Always compile add_serial now that it's somewhat generic
- icarus: Avoid sending a new job if the nonce found was for one before the
current job anyway
- icarus: Double-buffer work to solve nonces found before work change takes
effect
- icarus: Abstract nonce processing
- Bugfix: icarus: Avoid trying to submit 0 on comms error
- icarus: Skip unnecessary nonce memcpy
- icarus: Make state->last_work a pointer and store it on the heap
- README.RPC: Remove usbstats mention
- README: Add FAQ regarding cgminer messing up drivers
- README.RPC: Fix miner name
- README.RPC: Correct to mention other supported devices for pgaidentify
- api.c fix mcast debug message bug
- README.RPC: break all lines at most 80 characters
- Update the API Multicast documentation
- miner.php implement API Multicast handling to automatically find your local
net miners
- Bugfix: RPC: Fix log format types in io_flush
- Set RT_LIBS correctly from autoconf detection
- Explicitly check for clock_nanosleep and only use it when available
- Further integrate cgsleep API into BFGMiner's timer system, so clock_nanosleep
is only used on platforms with CLOCK_MONOTONIC
- Convert cgtimer_t to struct timeval
- Bugfix: Fix BSD sed syntax for curses header search
- Bugfix: configure: Really fix BSD sed syntax for libusb header search
- README.RPC: Mention multicast detection
- README: Include --mcast-* options in usage
- Use ccan's standard char* set/show functions for --api-mcast-{addr,code}
- Bugfix: RPC: Use the same mcast code in reply, and log it correctly
- API mcast only reply to remote IP's that are allowed access
- Initial API Multicast response v0.1 to find cgminer APIs
- Check for cnx_needed on each loop through wait_lp_current.
- Return positive for cnx_needed when no_work is true.
- Add no_work bool to set when we are in an underrun situation
- Reorder support names alphabetically.
- We don't want to continue into the hash_pop function if the getq is frozen.
- Carve out the unused portions of sha2 implementation.
- Import Aaron D. Gifford's fast sha256 implementation.
- Use cloned work when finding avalon results since another thread can discard
the work item while it's in use.
- Provide a variant of find_work_bymidstate that returns a clone of the found
work.
- Use timespecs on windows as cgtimer_t to capitalise on the higher resolution
clock changes.
- Abstract out the conversion of system time to an lldiv_t in decimicroseconds.
- Use our own gettimeofday implementation on windows for it to be consistent
across ming builds and higher resolution.
- Provide cgtimer_sub helper functions.
- Provide cgtimer_to_ms helper functions.
- Rename cgsleep_prepare_r as cgtimer_time to get time in cgtimer_t format and
call cgsleep_prepare_r as a macro for cgtimer_time
- TimeBeginPeriod and TimeEndPeriod do not add significant overhead when run the
entire time for cgminer so avoid trying to maintain balanced numbers of them for
specific time calls to simplify code.
- Replace all references to the old n*sleep functions with the equivalent
cgsleep_*s replacements.
- timeGetTime uses huge resources on windows so revert to using timevals for its
implementation of cgtimer_t
- Quotient/remainder error in ms division.
- Provide cgtimer_to_timeval helper functions.
- Provide a timeval_to_cgtime helper function to reuse values.
- Simplify cgsleep code for windows by using a typedef for cgtimer_t that
resolves to clock resolution, using that internally.
- On windows use the higher accuracy timegettime function to really get 1ms
clock and timer accuracy.
- Fix missed endtimeperiod in overrun timer on windows.
- Make cgsleep_us_r take an int64_t for us.
- Make the cgsleep functions build on windows.
- Set high resolution timing on windows within the cgsleep functions.
- Provide reentrant versions of cgsleep functions to allow start time to be set
separately from the beginning of the actual sleep, allowing scheduling delays to
be counted in the sleep.
- Make the nmsleep and nusleep functions use the new cgsleep functions internally
till functions are migrated to the new cgsleep API.
- Add a ms_to_timespec helper function, and create a cgsleep_ms function that
uses absolute timers with clock_nanosleep to avoid overruns.
- Add rt lib linkage to enable use of clock_nanosleep functions with older
glibc.
- Add a timeraddspec helper function.
- Provide a us_to_timespec helper function.
- Provide a us_to_timeval helper function.
- Add helper functions to convert timespec to timeval and vice versa.
- Bugfix: SGW: Discard work from log only by expiry, so post-startup hardware
errors are truly only hardware errors
- bitforce: Make voltages available to RPC
- bitforce: Save voltages as array of longs internally
- Bugfix: Clear device bad nonces when zeroing stats
- cpu & opencl: Defer RUNONCE to actual autodetection, so they can be added once
after startup
- Bugfix: Avoid crash activating [M]anage devices with no currently defined
devices
- TUI: Support for adding new devices using the plus key from [M]anage devices
- Bugfix: Use add_serial function for scan_serial, so that "all" keyword works
correctly
- SGW: Add support for new X-Hashes-Done header to allow devices to more
accurately report their work
- SGW: Add X-Mining-Identifier header to inform devices what they are
represented by in BFGMiner
- SGW: Use JSON for 401 response; add Server HTTP header
- AUTHORS: Add contributor Josh Lehan
- Changed comparison constants to allow for floating-point rounding
- Install README.ASIC for Block Erupter related drivers as well as Avalon
- make-release: Windows users don't need README.Debian
- README.OpenWrt: Import from BFGMiner downloads
- Silence Windows warning about send data signedness
- Fix block info
- API/miner.php add some % fields
- Don't yield on grabbing the read lock variant of cglocks.
- util.c expand quit to show file/func/line
- We should be using a cg_wlock initially in generating stratum work before
downgrading the lock.
- Add the ability to downgrade a write variant of the cglocks.
- Yield after releasing a lock in case we are on a device with limited CPU
resources.
- Fix --scrypt being required before scrypt intensities on command line or not
working at all via config files.
- Limit intensity range according to whether scrypt is in use or not.
- Do not allow benchmark mode to be used with scrypt.
- miner.php format Best Share
- README.ASIC block erupter USB brief
- Check for negative wait time in socket_full.
- Adjust socket wait timeout in recv_line according to how long we've already
waited to avoid a 60 second wait dropping to 1 second due to a blocked socket.
- force type checking on curses
- logging - size check sprintf
- Only use length-counted variants of format_unit and percentf
- Implement snprintf-like versions of format_unit and percentf
- miner - size check all sprintf
- size check get_datestamp/get_timestamp and remove unused cgpu->init
- make all statline overflow safe
- Convert the decay_time function into one that truly creates an exponentially
decaying average over opt_log_interval.
- GPU fan rpm display 9999 when it overflows
- Change mode on python file.
- Only update hashmeter if we have done hashes or haven't updated longer than
the log interval, fixing a us/ms error.
- README.ASIC: Document usage with Block Erupter Blades
- README: Add mention of libmicrohttpd to dependencies
- SGW: Include hash1 in work
- SGW: Include application/json Content-Type header
- Fix build without libmicrohttpd
- Allow startup to proceed with no devices, as long as RPC or HTTP are listening
- SGW: Refuse to issue new work to disabled devices
- SGW: Respond with stale rejection if share is known to be immediately stale
- Expose HTTP getwork username in Manage TUI and devdetails RPC
- Add --cmd-idle notification command for REST/WAIT conditions
- bfgminer-rpc: Accept unlimited size replies
- api-example.py: Accept unlimited size replies
- RPC: Rewrite io_data to cleanly handle unlimited sized responses
- Configure options to build --without-libmicrohttpd support
- RPC: setconfig can now change http-port (enabling or disabling the http
service included)
- Embedded HTTP server to handle getwork-based mining devices
- inc_hw_errors2 function can handle a bad nonce without a known work
- Split up scan_serial function to enable internally adding ad-hoc cgpu
- Helper functions bfg_json_obj_string and share __json_array_string
- bytes_t: Add bytes_shift and bytes_nullterminate
- Fix configure help for --without-sensors
- README: Document --with-system-libblkmaker
- Bugfix: Use BSD-friendly sed syntax for libusb header search
- Bugfix: Handle bitstreams properly
- Bugfix: Skip search for addwstr since it breaks --with-curses=preference
- Bugfix: configure: Find correct curses include path without *-config
- README.FPGA: Further clarify ZTEX setup
- Display a friendly error directing to README.FPGA when bitstream cannot be
loaded
- Remove bitstreams from BFGMiner distribution entirely, and include pointers
where to find them in README.FPGA
- ztex: Use load_bitstream_bytes for .bin files
- fpgautils: load_bitstream_bytes support for Intel HEX format (.ihx) files
- Add missing 16-bit byteswap macros
- fpgautils: load_bitstream_bytes function to load a bitstream into a bytes_t
- bytes_t functions: bytes_init, bytes_append, bytes_reset
- Look for bitstreams in /usr/share/bitstreams
- Disable Unicode support by default (use --unicode to enable)
- make-release: Skip stripping debug info from Windows EXEs, for now
- Bugfix: Ensure work variable is assigned before checking its thr_id
- Bugfix: notifier_init (Windows): setsockopt needs an int for SO_REUSEADDR
- Bugfix: Avoid turning totals red just because a processor is idle
- Enable notifications for sick/dead with --cmd-sick and --cmd-dead options that
execute commands when the event occurs
- RPC: Add cpu enable/disable/restart
- windows-build: Update to use libpdcursesw.dll
- Ensure socket error messages are used for socket errors on Windows
- fpgautils: Attempt to use Linux advisory locks on serial devices
- Bugfix: README: --temp-cutoff sets the maximum temperature before cutoff, not
temperature that triggers cutoff
- Bugfix: Avoid incrementing dev_thermal_cutoff_count when just updating
timestamp on status
- Detect curses support for wide characters during configure
- configure: Check for more variants of curses library names
- Bugfix: ztex: Avoid trying to format non-libusb error with libusb error name
- Bugfix: Avoid trying to assign const use_unicode variable with --no-unicode
option
- Remove long-unused opt_time variable
- RPC: Avoid exposing Coinbase-Sig when it isn't supported
- Bugfix: Fix build with libblkmaker < 0.2
- Attempt stratum mining.suggest_target before mining.subscribe, if
--request-diff is used
- Retry stratum if initiation fails for any reason after we have sent something
(assuming there is more older variants we can try)
- Bugfix: Restore delay for authorization on stratum mining.get_transactions
- Bugfix: Fix TUI-only build
- bitforce: Extend pgaset _cmd to variable-length commands
- Bugfix: Use red for total processor count
- bitforce: Undocumented _cmd1 pgaset for experimenting with firmware
- Bugfix: curses: use_default_colors() when possible
- Bugfix: Calculate scrolling range with new cursor lines
- Bugfix: Ensure use_unicode and have_unicode_degrees constants are defined for
curses-less builds
- Bugfix: Replace block_timeval with (time_t) block_time
- README: Update for --no-unicode option


BFGMiner Version 3.1.4 - August 2, 2013
- Windows: Rebuild pdcurses with UTF-8 and wide character support
- Bugfix: Avoid using wide curses symbols/macros when USE_UNICODE is not defined
- Unicode: Use line drawing in TUI Help
- Use bfg_waddstr even with Unicode disabled, since it's needed for red
highlight
- Colour bad conditions in red
- Unicode: Cross-tee intersecting lines
- Unicode: Use WACS_VLINE for vertical lines
- Unicode: If degrees symbol is available, add it to temperatures
- Unicode: bfg_waddstr wrapper to handle non-ASCII characters, currently used
only by logging and statlines
- Unicode: Use WACS_HLINE for horizontal lines
- Add framework for using Unicode in TUI (can be disabled with --no-unicode)
- Avoid using potentially locale-dependent ctype functions in locale-independent
contexts
- Refactor temperature in TUI statlines to share code nicer
- Bugfix: avalon: Fix applog formatting
- Bugfix: Align totals columns in per-processor view
- Bugfix: Fix curses-less build
- configure: Workaround buggy autoconf versions
- Bugfix: erupter: Include headers in order necessary for Windows
- Bugfix: Reimplement get_intrange using strtol instead of sscanf (which is
broken on Windows)
- Bugfix: get_intrange: Check for extra garbage at the end, only after we know
we have an end-position
- Bugfix: Fix Enter key in TUI on Windows
- erupter: Split identify-handling logic into handle_identify function
- Bugfix: erupter: Ensure identify is handled during no-once or firstrun
- erupter: After identify, check if a work restart is needed immediately
- erupter: Implement identify function by pausing hashing for 3 seconds
- Bugfix: icarus: Remember firstrun state in case it gets changed for the next
run
- icarus: Move actual dynclock updates to icarus_job_start
- icarus: Split out icarus_job_prepare, and rename icarus_job_start
- Bugfix: ZeroStats: Reset column widths to 1
- miner.php: Include max temperature in device totals line
- Bugfix: Stratum Fix debug logging of initial mining.subscribe command
- Bugfix: Call pool_set_opaque from work_decode, so block content hiding/
providing messages work for getwork/GBT
- Split block contents hiding/providing notices out from stratum code
- Add test suite for get_intrange
- Bugfix: Check for error conditions in get_intrange to not have weird --device
behaviour when bad values are provided
- Bugfix: erupter: Take advantage of detectone_meta_info to handle Emerald
autodetection
- TUI Help describing the various status fields (contributed by midnightmagic)
- Bugfix: ManageTUI: Allow 'I' key to be used by devices not supporting identify
- Bugfix: Prefer Sapphire over Emerald for -S erupter:*
- Bugfix: Clear total_bad_nonces when zeroing statistics
- Bugfix: modminer: Since we are not searching iManuf string for needles, only
look for "ModMiner"
- Bugfix: sysfs autodetect: Recurse into tty/ subdirectory (necessary for
CDC/ACM ttys)
- sysfs autodetect: Split tty* directory search into new _sysfs_find_tty
function
- modminer: Reduce default clock to 190 MHz
- README: Update driver info to include Erupter driver
- README: FAQ about scrypt and difficulty
- Include count of working devices/processors in totals statline
- Format totals statline the same way as individual device/processor statlines
- Rearrange TUI a bit, including menu at the top (+1 log line) and hashrate
total closer to device summaries
- Bugfix: setup_stratum_curl: Need to release stratum lock on connection failure
too
- Bugfix: Avoid unnecessary locks inside curses_print_status, which is called
with the console lock held
- Bugfix: setup_stratum_curl: Hold stratum lock until connection completes, to
avoid potential races
- Bugfix: stratum_works: If stratum is already active, it works (avoid trying to
initialise it again)
- Replace hashrate_to_bufstr/ti_hashrate_bufstr with format_unit/
multi_format_unit_array
- New multi_format_unit_array to fill multiple buffers instead of building a
delimited string
- multi_format_unit: Skip recounting length of fixed-length strings
- Shrink status line to fit in 80 columns
- Add network bandwidth rate to TUI
- New multi_format_unit variadic macro to handle formatting multiple numbers at
once
- format_unit: Option to choose 3-digit integer display vs 5-character floating-
point display
- Optimization: format_unit: Handle number first, to avoid having to restore
suffix later
- Generalise hashrate_pick_unit/hashrate_to_bufstr into pick_unit/format_unit
- Extend hashrate_pick_unit/hashrate_to_bufstr to handle sub-kilo units
- Split total_bytes_xfer to total_bytes_rcvd and total_bytes_sent
- Bugfix: _decode_udev_enc_dup: Allocate enough space for full string
- Bugfix: Never use waddstr for logwin, since it would bypass special newline
handling
- Bugfix: bitforce: Set kname on chip processors
- bitforce: Include voltages in Manage device TUI
- Defer newlines going to curses logwin, to avoid a useless blank line at the
bottom of the window
- Ensure printing to logwin always goes through _wlog
- Remove blank line above log window
- bitforce: Identify parallel queue protocol distinctly from mere bulk queue
- ManageTUI: Include kernel name, when available
- Stratum: Roll ntime as we generate work
- Stratum: Make swork.ntime native-endian
- Stratum: Treat ntime as uint32_t (as it should be), still always big endian
- Debuglog ManageTUI actions/responses
- ManageTUI: Add generic Identify support
- Bugfix: Move serial_detect* and open_bitstream to DevAPI code so CPU/OpenCL
can build properly without fpgautils
- Short-circuit logging sooner in quiet mode
- Write to both stderr and console within same console lock "session"
- Bugfix: Also hold the console lock when writing to stderr
- Use common console locking function for stdout in logging.c
- Move console lock and unlock functions (which also handle thread cancelstate)
to miner.h
- Bugfix: bitforce: Only try to clear queues of SC devices, since FPGA MR boards
interpret ZQX/ZOX differently
- Timer-based gettimeofday substitute for systems with poor time-of-day clocks
(Windows)
- Use clock_gettime(CLOCK_MONOTONIC) for timers when available
- Use QueryPerformanceCounter for timers on Windows
- Generic refactoring for timer_set_now
- Replace all remaining uses of gettimeofday for timers, with timer_set_now (aka
cgtime)
- Don't mix timers with timestamps (visual only)
- Always use struct timeval for timers, and don't mix timers with timestamps
(functional only)
- get_datestamp: Change timeval parameter to time_t, and implement
get_now_datestamp for common "current time" use case
- Use get_datestamp for (non-microsecond) log timestamps
- Bugfix: ztex: Allocate final processor names on the heap, so they survive when
the stack for ztex_prepare is gone
- Bugfix: ztex: Copy serial number to device "name" before cloning it for other
processors
- Bugfix: x6500: Use cgpu->temp directly since there is only one sensor per
processor
- Bugfix: Actually show the highest temperature, not just calculate it
- x6500: Allow changing clock speed from TUI Manage device
- x6500: Port pgaset clock from modminer driver at
66d2a3ab072fcdbc3c7ed41a97f265afa917bbee
- modminer: Allow changing clock speed from TUI Manage device
- bitforce: Flush job and result queues at startup to avoid unnecessary warnings
- x6500: Reduce default clock to 190 MHz
- Bugfix: fpgautils: Close libusb handle after copying USB strings
- use BSD sed syntax to generate iospeed_local.h


BFGMiner Version 3.1.3 - July 11, 2013
- Bugfix: Reset staged_full flag when discarding (stale) popped work, or
increasing the queue minimum
- Bugfix: Only trigger staged work underrun if a mining thread was actually
waiting for it (and do so sooner, before it has the work made)
- bytes_cpy: avoid malloc and memcpy when size is zero
- fix infinite loop in bytes_cpy when size is zero
- Bugfix: Generate iospeeds_local.h based on termios.h defines, and only try to
use POSIX standard if that fails


BFGMiner Version 3.1.2 - July 8, 2013
- When not compiling with optimizations, initialize unused nonce2 space to avoid
warnings from memory checking tools
- TUI Manage devices: Support PgUp/PgDn keys to skip over processors within the
same device
- Bugfix: bitforce: Prefer 2nd temperature if higher than 1st
- When displaying device summary statlines, use the highest temperature reported
by any processor
- Stratum: Fix nonce2 sizes greater than 4 and (on big-endian) smaller than 4
- bitforce: Manage TUI: Display both temperatures (if two), and enable changing
fan speed
- opencl: Add fan speed to Manage device TUI now that it's been removed from
statline
- DevAPI: Remove old statline APIs entirely, and add new override_statline_temp
(used by modminer/x6500 for upload %)
- README: Update statlines
- TUI: Replace DevAPI statline_before with a predefined temperature column to
free up statline space
- Refactor and simplify bin2hex to speed up and avoid unnecessary heap use
- stratum: Refactor work generation to do hex2bin conversions once, rather than
every single header generated
- Implement bytes_t for generic binary data storage (including smart realloc-
based resize)
- Bugfix: fpgautils: Only try to change baud rate when requested
- x6500: Provide manuf/product/serial to cgpu interface
- ztex: Provide manuf/product/serial to cgpu interface
- erupter: Use baud 115200 by default
- List valid baud rates once in iospeeds.h and standardize conversions
- TUI: Display device manufacturer/product/serial in Manage device screen, when
available
- DevAPI: Store manufacturer/product/serial for each device
- fpgautils: detectone_meta_info to provide metainformation (manufacturer,
product, serial) on devices to detectone functions
- Bugfix: fpgautils: Close product string file from sysfs (autodetect)
- erupter: New icarus-based driver to handle autodetection of Block Erupter
devices
- Add --log-file option which redirects stderr to a file, but valid anywhere in
the commandline or config file
- Detect staged work underruns and increase queue to avoid them
- Rewrite hex2bin to perform much faster (reduces minirig CPU usage by more than
half!)
- README: Add condensed list of dependencies
- Enable "maintainer mode" by default
- Bugfix: opencl: TUI manage: "Change settings" must not be compiled in with
no-ADL builds
- Bugfix: Detect whether the linker accepts -zorigin before attempting to use it
- opencl: ADL: ADL_Adapter_ID_Get fails with newer drivers, so tolerate its
failure best we can
- opencl: Don't try to use BFI_INT patching with APP-SDK newer than 1084
(Catalyst 13.1), since it doesn't work
- fpgautils: Elaborate that bitstream open failures are probably due to missing
bitstream package
- fpgautils: s/firmware/bitstream/
- Bugfix: Cleanup handling of complete device/driver failure
- Deprecate -C (enable CPU) and -G (disable GPU) options, now that -S
drv:[no]auto can be used for the same purposes
- Bugfix: Since at least one of unix (or __APPLE__) or WIN32 is required by
util.h, make sure unix is defined if WIN32 is not
- Bugfix: Set ELF rpath for bundled libblkmaker to use $ORIGIN so it can be run
from other directories
- Bugfix: Cleanup needs to happen before printing the final quit message, or it
gets lost in TUI mode
- Bugfix: fpgautils: Initialize my_dev_t instances with null bytes, to ensure
random unused data cannot influence hash keys
- opencl: ManageTUI: Clear log cleanly for changing settings
- Remove "GPU management" TUI entirely
- opencl: Use new "Manage device" interface to do everything "GPU management"
used to be used for
- DevAPI: Add interface for drivers to define custom "Manage device" options
- DevAPI: New function called to display additional processor information for
"Manage devices"
- TUI: Add enable/disable commands to device management
- TUI: Implement beginnings of generic device management interface
- Bugfix: avalon: Fix LIFE_INIT2 setting
- Add LIFE_INIT2 status (safe to call functions, but not mining yet) for devices
that want to report initialization status in their statline
- Bugfix: modminer: Only program once for --force-dev-init
- Bugfix: x6500: Only program once for --force-dev-init
- fpgautils: Workaround and document Xcode clang bug
- Bugfix: avalon: Correctly claim serial port
- Bugfix: -S all: Mac OS X needs to probe /dev/cu.*, not just /dev/cu.usb*
- cpu & opencl: Refuse to detect more than once
- cpu & opencl: Respect scan-serial auto/noauto instructions
- ft232r & libztex: Skip probe of claimed devices
- fpgautils: Check for devices being claimed before calling detectone from autodetectors
- x6500 & ztex: Claim USB devices
- fpgautils: Implement bfg_claim_usb for claiming devices by USB bus number and
address
- fpgautils: Replace serial_claim with bfg_claim_serial using a more cleanly
extensible interface and implementation
- fpgautils: serial_claim: Include a bus enum in hash key
- Add serial port claiming logic to avalon, bitforce, and modminer drivers
- RPC: "devscan" command to probe for new devices
- New (internal) scan_serial function to probe for new devices at runtime
- Split out per-cgpu temperature configuration code to load_temp_config_cgpu
- DevAPI: Modify add_cgpu to use temporary devices_new array, so detection can
be done without touching live variables
- Move more cgpu initialization to allocate_cgpu
- Move devtype default assignment to allocate_cgpu
- Move cgpu startup routine to new start_cgpu function
- Move cgpu_info allocation to new allocate_cgpu function
- Move *.drv_detect calls to a new drv_detect_all function
- DevAPI: add_cgpu: There is no need to hold mutexes while creating devices
- Bugfix: cpu: Update device "kernel name" with auto-selected algorithm
- usbtest: Improve portability to at least 2.7 and 3.2
- usbtest: Avoid messing up the display by escaping weird bytes via repr()
- usbtest: Skip last 2 optional parameters, since we use the defaults and they
are not in older versions of pyserial
- Bugfix: bitforce: ZOX limits results to 16 results per call, so repeat ZOX
until there are fewer
- Bugfix: Initialization for bfgtls needs to be done in each thread
- Bugfix: stratum: Be patient with stratum lines that come in slower than we can
process them
- Use bfg_strerror in locations previously just logging raw error numbers
- Bugfix: stratum: Log WSAGetLastError() for error number on recv failures on
Windows
- Use bfg_strerror where it is already needed (for thread-safety)
- New thread-safe bfg_strerror function to portably stringify error codes
- Bugfix: bitforce_queue: Initialize buf2 so errors don't cause the work queue
to flush
- TUI: Display percentage invalid of found nonces with hw errors
- Bugfix: modminer & x6500: Increment *->diff1 for all bad nonces
- percentf2 that takes t as precalculated total
- Keep track of bad nonces independently from generic hw errors
- inc_hw_errors: Resolve cgpu outside of mutex
- Use inc_hw_errors function at every site which increases hw_errors


BFGMiner Version 3.1.1 - June 22, 2013
- stratum: Deliver exact socket-error within the debug error message
- Don't install docs for (compile-time) disabled functionality
- Bugfix: Handle make dependencies on subdirectory files properly
- Bugfix: Use EXTRA_*_DEPENDENCIES for Cygwin workaround, to fix program make
dependencies
- Support new overclocking speeds for avalon: 325, 350 and 375
- Bugfix: logging: Since we are inlining snprintf, stdio.h is needed
- Bugfix: serial_autodetect_ftdi: Debuglog FTDI COM port mappings returned, fix
type of FT_HANDLE
- Bugfix: Allow starting non-libusb devices if libusb_init fails
- Bugfix: Add missing newline to libusb_init failure message
- Bugfix: opencl: Remove unnecessary casts from rot() macro, which created type
issues
- Bugfix: Remove unused variables
- Suspend stratum connections when we know they've failed and don't try to recv
data from them once the socket no longer exists.
- applog/quit fix GPU errors created
- logging remove extra added <LF>
- remove varargs from logging/quit/in general as much as possible
- compile unix code on Mac OS X fixes not finding the config file in $HOME
- Create a pool_localgen bool function for testing when a pool can generate work
locally.
- Use mining start time for device MH/U calculations
- Bugfix: Save start time for stats to correct "Elapsed" key on "stats" RPC
request
- modminer: tidy up free in device detect function
- bitforce: RPC pgaset fanmode 9 for auto fan control
- Bugfix: usbtest: Correct obvious typos
- Initial import of usbtest.py script
- Include microseconds in log output with new --log-microseconds option
- bitforce: Workaround chip ids not necessarily being in order by choosing
processor count based on expected chip ids rather than parallelization
- serial_autodetect_ftdi: Debuglog FTDI COM port mappings returned
- Bugfix: On stratum disconnect, clear stratum_active and stratum_notify
atomically along with sock
- Windows: Use backtrace.dll to print usable backtraces to stderr on crash
- Bugfix: bitforce: parallelized: Properly handle parallelized protocol with
only 1 chip
- Bugfix: bitforce: XLINK: Increment boardno when moving on to the next board
- bitforce: XLINK: Update to use actual length,xlinkid header order
- Bugfix: bitforce: XLINK: Avoid trying to send 0 bytes after each write
- Bugfix: opencl: Build fpgautils even if OpenCL is the only driver, now that it
uses it for kernel-finding
- Bugfix: Do not try to call get_stats or get_statline* if device is still
initializing
- Bugfix: opencl: Add missing include for fpgautils.h (needed for
open_bitstream)


BFGMiner Version 3.1.0 - June 13, 2013
- Bugfix: openwrt: Expect fixed bitstream path for input
- Improve Makefile organization and fix "make install"
- icarus: Upgrade work division autodetection probe to be faster and also detect
8 core
- Calculate rejection percentage based on weighed shares, not absolute counts
- Count weighed discarded (stale) shares per cgpu
- Bugfix: Cleanly count discarded (stale) shares without overlapping
devices/sshare locks within clear_stratum_shares
- configure: Enable Avalon support by default now that it behaves reasonably
- avalon: Since detection is not really implemented, only probe devices when the
driver is specified to -S by name (eg, "avalon:/dev/ttyUSB0")
- Bugfix: bitforce_queue: Never try to reinitialize a slave processor
- Bugfix: bitforce_queue: Use work_list_del everywhere we remove from work_list
to ensure work gets freed properly when done
- Reduce HW error logging to debug level, so it doesn't clutter the TUI log by
default
- DevAPI: When a device has more than 26 processors, represent them as aa-zz
- bitforce: bitforce: Fix TUI display of slave processors on parallelized boards
- bitforce: Only display temperature in TUI for the first chip on parallelized
boards
- Bugfix: bitforce: Set temperature for all processors on the board
- Bugfix: bitforce_queue: Initialize proc->device_data to board data for
parallelized chip processors
- Bugfix: bitforce_queue: Defer nonce count check until after thiswork has been
identified (or handled as NULL)
- avalon: avalon_clear_readbuf can simply wait for a single read timeout on
Windows to avoid select
- avalon: Simplify avalon_get_result by using avalon_gets
- avalon: Go back to good old serial timeouts for gets, since select() is for
sockets (only, on Windows)
- Updated api.c to return the hashrate with 3 decimal places
- Change hashrate display to never display 3 fractional digits, because it looks
a bit ugly
- bitforce: Credit hashrate to the correct chip on parallelized devices
- Re-set work thr_id on share submissions, to ensure the result gets credited to
the correct device in case of shared job queues (as in BitForce long boards)
- bitforce: Turn parallelization into separate logical processors for more
details on each, including working with XLink
- bitforce_queue: Implement job sanity checks using new "ZqX" for devices using
parallelization
- bitforce_queue: Minimal support for parallelization
- Add --device-protocol-dump option to debuglog low-level bitforce protocol
details
- When shutting down, set work restart flag (and trigger notifier) to help
mining threads escape to their main minerloop (and check for shutdown)
- Document and check for uthash version 1.9.2+
- Bugfix: Don't report failure for graceful mining thread shutdown
- Name devices in mining thread failures
- Warn about killing mining threads
- Bugfix: Wake up mining threads when asking them to shutdown
- Disable pthread cancel within curses locking
- Shorten the avalon statline to fit in the curses interface and show the lowest
speed fan cooling the asic devices.
- Change switch_compact function name to switch_logsize to be used for other
changes.
- Only adjust cursor positions with curses locked.
- devs display - fix GPU duplicate bug
- basic copyright statement in API.java
- Change the --device parameter parsing and configuration to accept ranges and
comma separated values.
- Modify scrypt kernel message.
- Check for pool_disabled in wait_lp_current
- Check for pool enabled in cnx_needed.
- Add README.ASIC to debian packaging and make-release
- Document avalon options in ASIC-README
- Create README.ASIC with basic summary of supported ASIC devices.
- Do avalon driver detection last as it will try to claim any similar device and
they are not reliably detected.
- Set the fanspeed to the nominal chosen for GPUs.
- Clamp initial GPU fanspeed to within user specified range.
- Avalon fan factor is already multiplied into the info values.
- Get rid of zeros which corrupt display.
- Logic fail on minimum fanspeed reporting.
- Provide a workaround for fan0 sensor not being used on avalon and pad fan RPM
with zeros.
- Add ambient temp and lowest fan RPM information to avalon statline.
- Display max temperature and fanspeed data for avalon.
- Set devices to disabled after they exit the hashing loops to prevent the
watchdog thread from trying to act on them.
- Scanhash functions perform driver shutdown so don't repeat it.
- Change the opencl shutdown sequence.
- Send the shutdown message to threads and do the thread shutdown functions
before more forcefully sending pthread_cancel to threads.
- Icarus report data direction with comms errors
- Execute driver shutdown sequence during kill_work.
- Provide an nusleep equivalent function to nmsleep.
- Set avalon_info to device data void struct.
- Make submit_nonce return a bool for whether it's a valid share or not.
- Do a non-blocking read of anything in the avalon buffer after opening the
device.
- Assign the avalon info data to the device_data in cgpu_info.
- Rename cgpu_data to use new device_data
- miner.h remove unused device_file and add device_data
- Must unlock curses as well in logwin_update.
- icarus report usb write error information
- Make mining threads report out during work submission.
- submit_work_async is no longer used directly by driver code.
- Create a logwin_update function which mandatorily updates the logwin and use
it when input is expected to prevent display refresh delays.
- All stratum calls to recv_line are serialised from the one place so there is
no need to use locking around recv().
- Only allow the mining thread to be cancelled when it is not within driver
code, making for cleaner shutdown and allowing us to pthread_join the miner
threads on kill_work().
- Implement pthread_testcancel replacement for BIONIC
- Attribute whatever stats we can get on untracked stratum shares based on
current pool diff.
- Downgrade OpenCL headers to 1.0, which work fine for our purposes and are more
compatible
- icarus: If work_division autodetect fails, just use the old default of 2
- avalonhost-raminst script to help with installing to RAM on Avalon-host
routers
- Attempt to probe /dev/cu.usb* for fallback "-S all"
- openwrt: Download uthash dependency
- Bugfix: openwrt: Always build with libsensors support disabled
- configure: Check for uthash headers
- Bugfix: ztex: Only destroy libztex device after the last handle to it has been
released
- ztex: Remove libztex slave device interface, simply passing fpgaNum to
selectFpga
- Bugfix: cpu: Fix yasm and sse2 detection
- cpu: Check for SSE2 support independently from yasm
- Bugfix: cpu: Make sure to link libsse2cpuminer.a before x86_32/libx8632.a
- Bugfix: cpu: Only build libsse2cpuminer iff yasm is available and targetting
x86_32
- Bugfix: Free work only after deleting it from list
- Remove embedded uthash.h and utlist.h from Makefile
- windows-build.txt: Update for system uthash
- Remove embedded uthash (and add dependency on system uthash)
- Replace elist.h with utlist.h
- Bugfix: Fix build with CPU mining and *without* yasm
- cpu: Be explicit about size of sha256_init address
- cpu: Add --algo fastauto (new default) to detect a usable algorithm without
taking over a minute
- cpu: Default to --algo auto
- cpu: Support all platform-applicable assembly algorithms, even if used CFLAGS
don't support them
- Ubuntu: Updated changelog, added scrypt support.
- cpu: Set fixed symbol names for stuff shared with assembly
- cpu: Create Mach-O asm binaries on Darwin-based systems
- Bugfix: cpu: Use COFF yasm binfmt on Cygwin
- Bugfix: cpu: Get correct nonce from data, where the CPU sub-drivers leave it
- Remove redundant "Reject ratio" in exit-time summary
- Apply "R+S(%)" formatting to long-form statistics
- Group stale shares in with rejects (but still distinctly counted) and make the
percentage be (reject+stale)/total
- Include rejected shares as a percentage
- Move Utility and Best Share to status line
- Remove LW from status line, since it is basically useless
- ztex: Clean up a lot of ugly casting
- Bugfix: Correctly avoid SIGPIPE on Mac
- Make set_work_target a function to set a specified char as target for use
elsewhere.
- Minor typo.
- Support more shares to be returned for scrypt mining.
- Set all stratum sockets to nonblocking to avoid trying to use MSG_DONTWAIT on
windows.
- Only use MSG_NOSIGNAL for !win32 since it doesn't exist on windows.
- Use MSG_NOSIGNAL on stratum send()
- Set TCP_NODELAY for !linux for raw sockets.
- Use TCP_NODELAY with raw sockets if !opt_delaynet
- Recheck select succeeds on EWOULDBLOCK for stratum.
- Don't use TCP_NODELAY if opt_delaynet is enabled with stratum.
- Fix warnings in avalon driver.
- correct applog typing
- Simplify the many lines passed as API data in the avalon driver now that the
API does not need persistent storage for the name.
- Duplicate the name string always in api_add_data_full to not need persistent
storage for names passed to it.
- Add extra matching work count data in API for Avalon with 4 modules.
- Clean up summary slightly better on exit.
- opencl: Disable using binary kernels on Apple by default
- Use sock_blocks in api.c
- Fix build and distdir.
- compile on win32
- Update README.scrypt with improved hashrates for 7970.
- Use copy_time helper throughout miner.c
- Provide wrappers for commonly used timer routines with API stats.
- Use flip32 function instead of open coding it in gen_stratum_work.
- Move util.c exports to util.h
- Replace gettimeofday usage with cgtime
- Adopt gettimeofday wrapper from cgminer (cgtime) that is always called with tz
set to NULL and increases the resolution on windows.
- Add high resolution to nmsleep wrapper on windows.
- Bugfix: Export stats_lock for deviceapi
- Set default ocl work size for scrypt to 256.
- fliter out the wrong result from adjust fan code
- Set last device valid work on adding device.
- Make scrypt submission use the submit_nonce code, with nonces matching
endianness.
- Increment hardware error count from the one site.
- compile avalon driver on win32 and win64
- build out of source dir
- Rename scrypt regenhash function for consistency.
- Add Mac FAQ.
- Further driver FAQs.
- Check for work restart after disable in the hash queued work loop since it may
be a long time before we re-enable a device.
- Unconditionally test for many wrong results on avalon and reset to avoid
passing a corrupt avalon result to temperature code.
- Only reset an avalon device with no results when there are no results
consecutively.
- More FAQs.
- Avoid applog in recalloc_sock.
- Avoid applog under cg_wlock.
- Put spacing around locking code for clarity.
- Avoid applog under pool_lock.
- Avoid more recursive locks.
- Avoid applog while ch_lock is held.
- Avoid recursive locks in fill_queue.
- Variable is already initialised in global scope.
- More GPU FAQs.
- More README faqs.
- Yet more README faqs.
- Add more FAQs to README.
- Wrap result wrong tests in avalon scanhash in unlikely() and only consider a
hash count of zero wrong if a restart wasn't issued.
- avalon: if result_wrong >= get_work_count jump out the read loop
- Fix warning on 32bit.
- fix the fan control on max temp2/3
- for some reason network down. one simple bfgminer command:   "bfgminer -o
127.0.0.1:8888 -O fa:ke --avalon-options 115200:32:10:50:256" can idle the
avalon for safe power and protect chip
- if hash_count == 0; reinit avalon, fix the 0MHS bug use the max value of temp1
and temp2 for fan control
- Reinstate the matching_work_count per subdevice on avalon based on the work
subid.
- Rationalise and simplify the share diff and block solve detection to a common
site.
- subid field for devices that do not yet support the distinct device/processor
interface
- Make the avalon array size a macro.
- Use replacement of work items in the avalon buffer as needed instead of
flushing them.
- Reinstate wrong work count to reset avalon regardless and display number of
wrong results.
- select() on serial usb in avalon does not work properly with zero timeout.
- Use no timeout on further reads in avalon_gets
- Do sequential reads in avalon_get_reset to cope with partial reads.
- Show read discrepancy in avalon_get_reset.
- Reuse avalon_get_work_count variable.
- Check for AVA_GETS_RESTART when deciding if avalon has messed up.
- Make the detection of all wrong results on avalon much more conservative to
avoid false positives on work restarts.
- Show error codes on select and read fail in avalon.
- If we get a restart message in avalon_gets still check if there's a receive
message to parse first without a timeout before returning AVA_GETS_RESTART.
- avalon_gets is always called from the one call site so inline it.
- The read_count is unused by the avalon get result code and no longer required
for avalon reset so simplify code removing it.
- Use a separate avalon_get_reset function for resetting avalon instead of using
avalon_get_result.
- The current hash count returned by avalon scanhash is just an obfuscated
utility counter so make it explicit.
- Check for a restart before a timeout in message parsing code in avalon.
- We should check for a restart message before checking for a timeout in avalon
scanhash.
- Store the subid for the work item in avalon.
- Fix record_temp_fan function in avalon driver.
- Remove inappropriate memset of struct avalon result which was corrupting fan
values.
- Only do_avalon_close once on multiple errors.
- Reset the result_wrong count on block change in avalon scanhash to prevent
false positives for all nonces failed.
- Small timeouts on select() instead of instant timeout increase reliability of
socket reads and writes.
- Rotate the avalon work array and free work on AVA_SEND_BUFFER_EMPTY as well.
- Only get extra work in fill_queue if we don't have any unqueued work in the
list.
- Don't get any work if our queue is already full in avalon_fill.
- Free avalon->works in the event we call avalon_prepare on failure to
initialise.
- Fix warnings.
- Create an array of 4 lots of work for avalon and cycle through them.
- Remove unused per unit matching work count for avalon.
- Rename the confusing avalon_info pointer.
- Simplify avalon scanhash code using the new find_queued_work_bymidstate
function.
- Members of cgpu_info for avalon are not meant to be in the union.
- Use correct struct device_drv for avalon_drv.
- Check enough work is queued before queueing more in avalon_fill.
- Actually put the work in the avalon queue.
- Rename avalon_api to avalon_drv.
- First draft of port of avalon driver to new cgminer queued infrastructure.
- Minor README updates.
- README.GPU: Properly warn about overclocking damage
- Add example 7970 tuning for scrypt in readme.
- Update driver recommendations.
- Add extensive GPU FAQs for the flood of new Scrypt miners.
- Bugfix: Expect bitstreams and kernels to be in the srcdir, not build dir
- cpu: Prefer sse4_64 algorithm if supported
- cpu: sse2_32: Force bare symbols for cross-asm/C symbols
- Compile CPU mining for win32 and win64
- configure: Check for pthread in -lwinpthread
- Use has_pth flag instead of trying to mess with pthread internals
- configure: Explicitly check for nanosleep
- configure: Include "no" response in BFG_PTHREAD_FLAG_CHECK
- miner.h missing extern
- Update links and recommended SDKs.
- Bugfix: README.GPU: Fix some typos
- Update README to match changes to display.
- Remove increasingly irrelevant discarded work from status lines.
- Remove increasingly irrelevant GW value from status.
- README.GPU: Correct terminology
- Update README about intensity.
- Bugfix: Restore always autodetecting stratum as non-scrypt
- icarus: Replace default of 2 work_division/fpga_count with autodetection of 1,
2, or 4
- Update scrypt readme with newer information and to match changes in code.
- Set default GPU threads to 1 for scrypt.
- Connect backup stratum pools if the primary pool cannot deliver work.
- Use a new algorithm for choosing a thread concurrency when none or no shader
value is specified for scrypt.
- Do not round up the bufsize to the maximum allocable with scrypt.
- Remove the rounding-up of the scrypt padbuffer which was not effectual and
counter-productive on devices with lots of ram, limiting thread concurrencies
and intensities.
- Make pool adding while running asynchronous, using the pool test thread
functionality.
- Only curl easy cleanup a stratum curl if it exists.
- Add intermediate variants of cglocks that can be up or downgraded to read or
write locks and use them for stratum work generation.
- Move the stratum data to be protected under a new cg_lock data_lock.
- Convert the ch_lock to cg_lock.
- Convert the control_lock to a cg_lock.
- Remove unused qd_lock.
- Implement cg_lock write biased rwlocks.
- Don't start testing any pools with the watchpool thread if any of the test
threads are still active.
- Set sockd to false should curl setup fail on stratum.
- Reopen the socket whenever we're retrying stratum.
- Set pool died on failed testing to allow idle flag and time to be set.
- Remove unused pthread_t typedefs from struct pool.
- Perform pool_resus on all pools that are found alive with the test pool
threads.
- Use pool_unworkable in select_balanced as well.
- Differentiate pool_unusable from pool_unworkable.
- Keep a connection open on higher priority stratum pools to fail back to them.
- Set the wrong bool in pool_active
- Only bypass unusable pools if they're not the selected ones.
- Find the first usable pool in preference to the current pool in select_pool
for work.
- Add a pool_unusable function which checks if a pool is stratum but not active
to use within switch_pools.
- API no longer ignore send() status
- API make the main socket non-static
- Start the stratum thread only if we successfully init and authorise it,
otherwise unset the init flag.
- Make the initialisation of the stratum thread more robust allowing the
watchpool thread safe access to it after the stratum thread is started.
- Shorten the time before keepalive probes are sent out and how frequently
they're sent with stratum curls.
- Display select return value on select fail in stratum thread.
- Clear the socket of anything in the receive buffer if we're going to retry
connecting.
- Perform pool resus on pools that were not set as the initial pool at startup.
- Allow pools to be resuscitated on first startup by the watchpool thread.
- Check all pools simultaneously at startup switching to the first alive one to
speed up startup.
- Close any sockets opened if we fail to initiate stratum but have opened the
socket.
- API use control_lock when switching pools
- Clear last pool work on switching pools if the current pool supports local
work generation or we are in failover only mode.
- make rw locks: mining_thr_lock and devices_lock
- work queues - remove new but unnecessary functions
- functions for handling work queues
- find_work() to find work in devices work queue
- Add a get_queued function for devices to use to retrieve work items from the
queued hashtable.
- Add the choice of hash loop to the device driver, defaulting to hash_sole_work
if none is specified.
- Add a driver specific flush_work for queued devices that may have work items
already queued to abort working on them on the device and discard them.
- Flush queued work on a restart from the hash database and discard the work
structs.
- Create a central point for removal of work items completed by queued device
drivers.
- Create a fill_queue function that creates hashtables of as many work items as
is required by the device driver till it flags the queue full.
- Create the hash queued work variant for use with devices that are fast enough
to require a queue.
- Make sure to do full avalon_init if the device_fd is invalid.
- Document extra zero byte in avalon_reset.
- Microoptimise likely paths in avalon_gets.
- Make sure to set timeout to 100ms instead of 1ms in avalon read loop for
select.
- Make sure to get time of first response in avalon read loop.
- Use select for a reliable timeout in avalon read and don't read 1 byte at a
time, optimising read loop.
- We should break on the loop on a work restart in avalon, and only consider all
errors if we actually have gotten some results.
- Avalon init on comms error as well.
- Reinit avalon device in case of FPGA controller mess up.
- Increase reliability of avalon startup by only opening and resetting the
device once, looking for the id sequence offset by one byte as well, and still
ignoring if it's wrong, assuming it is an avalon.
- Nest avalon_decode functions to avoid doing unnecessary lookups once we have
found the nonce.
- Use htole32 wrapper for nonce encoding in avalon.
- Remove unused rev8 function from avalon driver.
- Remove const qualifier from driver structs
- rename device_api -> device_drv and all related api -> drv
- rename get_proc_by_id() to get_devices()
- Wrap access to devices array under a mutex
- Provide wrappers for grabbing of thr value under the mining_thr_lock.
- mutex all access to mining_thr
- Split thr_info array into control_thr and mining_thr pointers so more mining
threads can be added later
- Update the hashmeter at most 5 times per second.
- Speed up watchdog interval and therefore display updates to 2 seconds.
- Add README.GPU to EXTRA_DIST.
- Split out the GPU specific information from the README into a README.GPU file.
- Update docs and reorder README to show executive summary near top.
- Add more FAQs about crossfire.
- Convert error getting device IDs in ocl code to info log level only since
multiple platforms may be installed and the error is harmless there.
- Unnecessary extra array in ocl code.
- Cope with the highest opencl platform not having usable devices.
- Update kernel file names signifying changes.
- Use constants from the array of __constants throughout the diablo kernel.
- Create a __constant array for use within diablo kernel.
- Use global constant arrays for all other constants used in scrypt kernel.
- Use global __constants for sha functions in scrypt kernel.
- Use constants for endian swap macros.
- Revise scrypt kernel copyright notice.
- Separate out additions in scrypt kernel.
- Reuse some Vals[] variables that can be assigned to constants earlier in the
poclbm kernel, making for fewer ops.
- Put all constants used in poclbm kernel into __const memory array to speed up
concurrent reads on the wavefront.
- opencl: Support for reading temperature from free software radeon drivers via
libsensors


BFGMiner Version 3.0.3 - June 13, 2013

- make-release: Include all submodules, recursively
- Remove API.java example (no copyright license)
- Minimally fix "make install" to ignore bitstream sources
- Add submodule for ZtexBTCMiner (aka ztex_ufm1_*)
- Add submodule for X6000_ztex_comm4 (aka x6500-overclocker-0402)
- ztex: Use standard file header/comment formatting, and update license to GPLv3
- bitforce: Allow a longer timeout (1250ms) for ZCX (Device Information)
commands
- Bugfix: pdcurses doesn't like changing logwin size without clearing it also,
so do that in display options
- -S all: Start QueryDosDevices probe with 256-byte buffer
- Use common code to ensure the prefix of -S *:all remains in all
implementations of it (/dev glob was removing prefixes)
- bitforce_queue: Ensure comma following nonce count is there, to error cleanly
- bitforce: Report queue send failures, and count as hw errors
- Bugfix: bitforce_queue: Don't try to send ready-to-queue work to device, when
there is no ready-to-queue work
- Bugfix: bitforce: Clear want_to_send_queue flag when flushing queue, since we
can't send an empty queue
- bitforce: Include new total queued count in flush debugging
- Bugfix: bitforce_queue: Implement a minimum wait time of 10ms
- README: Document serial device format for Mac OS X
- Bugfix: cairnsmore1: Enable building with libudev autodetection even if only
icarus drivers are enabled
- Bugfix: sysfs autodetect: Continue searching even after finding one tty (fixes
multiple ttys per device, such as some Cairnsmore1s)
- Bugfix: ztex: Avoid destroying libztex device in case other processors are
still in use (fixes crash when 1.15y becomes unavailable)
- Update windows-build.txt
- ccan: Add missing copyright comment headers
- Remove obsolete mknsis.sh
- Add missing copyright sections to files that may need them
- Standard copyright format (including year) for adl_functions.h
- Bugfix: When disabling device, ensure its prev_work (if any) gets freed
properly
- Check stratum socket exists and is writable before even considering whether
the sessionid is the same or not
- Bugfix: Check that the stratum_share struct for a failed submission is still
in the submission hashtable before trying to delete it
- README: Add missing documentation for CPU algorithms cryptopp_asm32, sse2_32,
and altivec_4way
- Bugfix: icarus: Check work restart before timeout
- Bugfix: icarus: Debuglog the correct read timeout (and omit from work restart
since there's no trivial way to get it)
- README: Update links
- Bugfix: cpu: Fix warning on Win64
- Bugfix: avalon: Strict formatting
- Bugfix: Cleanup trivial warnings
- Bugfix: bitforce: Seek to end of nonce counter to find nonces, in case there
are more than 9
- Bugfix: Build hexdump.c into the project normally like everything else
- Bugfix: Really fix device entries in saved config file
- Update the write config to properly record device entries and remove disabled
option.
- avalon: Really fix applog formatting
- va_copy is meant to be matched by a va_end in log_generic.
- Further fix distdir for hexdump.c
- Fulltest is true if value is <= target.
- Fix warning with no curses built in.
- Bugfix: configure: Check NEED_FPGAUTILS correctly
- configure: Better grammar for --enable-cpumining help
- Bugfix: Check for SSE 4.1 support before building sse4_64 asm CPU miner (uses
MOVNTDQA instruction)
- Bugfix: elist: Use uintptr_t for member offset
- Bugfix: opencl/adl: Fix format string
- Bugfix: opencl: Correct usage of formatted prints
- Increase fd limits as much as possible at startup
- Bugfix: bitforce: bulk queue: Cleanly retry for high temperature recovery
- Fixed deps for raring, which has newer libudev1.
- bitforce: debuglog actual result data
- Bugfix: Missing 'else' can result in null pointer dereference in race
- Minor grammo in avalon driver.
- Make avalon temperature reading LOG_INFO level.
- Fix the problem of seting up termio of ttyUSB0 for icarus. the CSIZE is the
mask of CS2/4/8
- bufsize is an unsigned integer, make it so for debug.
- Bugfix: bitforce: Include get_api_stats in BQUEUE mode
- Bugfix: Always compile support for commandline --temp-target and
--temp-cutoff, and write them in the config for all devices
- Bugfix: Ensure cURL timers get set correctly in submission thread
- Bugfix: modminer: Remove unused parameter to sprintf
- Bugfix: modminer: Use correct format for bytes left in bitstream upload
message
- Bugfix: Access strategy name string directly instead of accidentally
- Add printf-format syntax checks to more functions that should use it
- AUTHORS: Add more contributors
- Support configure flag --with-system-libblkmaker to allow building without the
bundled copy
- Bugfix: Use HTTP/1.1 compatible product token for User-Agent header


BFGMiner Version 3.0.2 - April 28, 2013

- Receive failures in recv_line should unconditionally fail.
- Use sock_blocks function for stratum send and receive.
- Avoid applog under stratum_lock in __stratum_send.
- Create an OS specific sock_blocks function.
- There should be no error response code with return value 0 in recv_line.
- Check for errors on stratum recv for any recv return value less than 1 and
only parse the response if it's positive.
- Avoid applog under stratum_lock in recv_line.


BFGMiner Version 3.0.1 - April 24, 2013

- Bugfix: configure: Move actual roundl macro back to miner.h after math.h
should be included
- Bugfix: configure: Use dummy pointer to correctly detect roundl when conftest
main is missing argc parameter
- Bugfix: configure: Use variable argument to roundl to prevent compilers from
optimizing it out entirely
- Remove bitstreams from Windows binary distributions (README directs users to
download source and copy them)
- make-release: Remove autom4te.cache from distributed source
- Bugfix: Omit --no-opencl-binaries option from build if OpenCL is not being
compiled
- Bugfix: Check that all pools have URIs set before starting
- Bugfix: bitforce: Make noncebuf large enough for max qresults +1 (for OK line)
- opencl: Ability to avoid using binary kernels with new --no-opencl-binaries
option
- README: Include jansson PKG_CONFIG_PATH in example for Mac
- Include trailing \0 with coinbase sigs if there's room
- Differentiate socket closed from socket error in recv_line.
- Add new best share info to verbose logging.
- Add notice for when network diff is changed.
- convert sleep(const) to nmsleep()
- Rename longpoll threads according to what pool they're associated with
- miner.php report 'Last Valid Work' as time before request
- API V1.25 - add 'Last Valid Work' time for each device
- add 'count' to customsummarypage 'calc'
- Bugfix: ztex: Initialize fw_buf pointer to NULL so a free before allocation is
safe
- Cleanup when stratum curl fails to initialise.
- LTC text typo
- Recreate cURL for new stratum connections, and clear stratum_notify on
suspending them
- clear_stratum_shares: Rename diff_stale variable to diff_cleared
- MMQ it's a bitstream
- Update a pool's last work time when the work is popped as well as staged.
- Extend stratum connections another minute (total 2 minutes) after the last
work item was staged, and maintain last_work_time for non-stratum pools.
- Fix --benchmark generating valid work for cgminer.
- Bugfix: Correct pdbuilder result directory
- Omit add_serial_all code when serial support is not wanted
- Use configure to detect presence of roundl to avoid redefining an actual
function (possibly inline)
- Bugfix: roundl: Add needed parenthesis to perform ?: before +
- Bugfix: ft232r: Defer allocating structure until after USB endpoint is
successfully opened, so it won't leak in case of failure
- Bugfix: ztex: Free bitstream in memory when done with it
- Bugfix: Safely handle all-space cURL debug messages, should they ever happen
- Silence warnings about poor format usage for quit()
- Apply noreturn and printf-format attributes to quit() function definition
- Bugfix: set_serial_rts get flags to manipulate them correctly
- Bugfix: Missing return for /dev globbing
- Bugfix: Free unused work when retrying failed lp request
- Display processor name with thread disabled/re-enabled messages
- Move best share to top summary line, and add network difficulty to block line
- opencl: Default to phatk kernel for Mesa platform
- opencl: Default to single thread with Mesa OpenCL
- opencl: Check for Mesa OpenCL and avoid using binary kernels with it
- bitforce: Never increase bulkqueue poll wait time during queue underruns
- bitforce: Start off polling bulk queue every 100ms
- bitforce: Log device queue size after getting bulk results
- bitforce: Ensure bulkqueue polling occurs at least once a second
- opencl: Include OpenCL platform in kernel binary filenames
- bitforce: Use bulk queue mode for all SC devices
- Bugfix: bitforce: When reinitializing, free all known works to avoid
decrementing reset queued counter
- bitforce: Handle timeout during ZOX as cleanly as possible
- Bugfix: bitforce: Make reinitialization more complete and safe
- Bugfix: bitforce: Close opened fd if reinit fails
- Bugfix: bitforce: Retry ZGX until device is NOT busy
- bitforce: Log when zero queued results are received


BFGMiner Version 3.0.0 - April 5, 2013

- Update libblkmaker to 0.3.0
- debian: Include new api-example.py in docs
- added example for Python using the RPC API
- added SPEC file for SUSE distributions
- Bugfix: bitforce: Free initialization data to avoid trivial one-time memory
leak
- Support for local submission of found blocks (GBT only)
- bitforce: RPC pgaset fanmode 0-5 for manual fan control
- bitforce: More debugging information
- Bugfix: modminer: Since RPC always includes the temperature, we don't need to
add it specially
- bitforce: Expose dual temperature sensors to RPC
- bitforce: Support for up to 2 temperature sensors per processor
- Bugfix: bitforce: BFP_QUEUE: Attempt to recover from extra queue results, or
the next job finishing early
- bitforce: Always send a new job ASAP after flushing the queue
- bitforce: Implement "Queue Job Pack" (ZWX) and use it for XLINK devices to
avoid USB latency issues
- bitforce: Ignore INPROCESS added to ZOX response
- Implement minerloop_queue for devices that process work items too fast to keep
track of which one they're currently working on
- bitforce: Split ZOX command into its own function
- Bugfix: DevAPI: Free work when preparing it fails
- DevAPI: Abstract get_and_prepare_work for minerloops
- DevAPI: Move select() logic from minerloop_async to do_notifier_select
- Clarify stratum mining.set_difficulty debug log message
- No longer call configure from autogen.sh
- Bugfix: bitforce: Ensure result_busy_polled gets set for queue mode to avoid
unnecessary 10ms wait times
- Bugfix: bitforce: Use common code for end of job_get_results, so queue results
don't short-circuit timing code
- Bugfix: bitforce: Ensure "OK" doesn't remain in queued results buffer
- Bugfix: bitforce: next_line needs to increment beyond the newline character
- Update README for x970 memdiff values.
- Do not scan other gpu platforms if one is specified.
- Update README for sync objects on windows.
- Add information for setting gpu max alloc and sync parameters for windows with
scrypt.
- Whitelist AMD APP SDK 2.8 for diablo kernel.
- Show pool number in switch message
- Clear just the socket buffer when we don't care what is left in a stratum
socket.
- Clear the stratum socket whenever we are closing it since the buffer is going
to be reused.
- Do not continue work from a stratum pool where the connection has been
interrupted.
- Close any existing stratum socket if we are attempting to restart stratum so
the pool knows the connection has gone.
- Show mechanism of stratum interruption if select times out.
- Make stratum connection interrupted message higher priority to be visible at
normal logging levels.
- API add 'Network Difficulty' to 'coin'
- avalon: if all result are wrong in one batch read. reinit the avalon
- avalon: record the last result temperature info
- delay when close avalon; only record matched result
- avalon: fix no_matching_work only count when debug
- avalon: minor change
- avalon: add idle code
- avalon: fliter the temp_max >= 100, print the result for debug.
- avalon: export more data to API stats
- avalon: add default chip frequency
- avalon: fix the work_i3 init
- avalon: add reinit_device
- avalon: the temp_history_count base on timeout
- avalon: fix mistake on adjest_fan
- avalon.c: fix the copyright
- bfgminer-rpc: add -o option: no format, only the result
- avalon: update fan pwm
- avalon: update the FAN_PWM MAX/MIN
- avalon: minor change
- avalon: overclock code
- avalon: fix the display
- avalon: minor change
- avalon: fix the fan/temp control
- avalon: fix the temp_avg
- avalon: fix temp
- avalon: add fan/temp control
- avalon: add FAN speed factor
- avalon: add TODO on fan/temp control. cleanup detect
- avalon: add the gate_miner bits
- avalon: only send one byte on reset
- avalon: add support on send 2 bulk taskes at begin
- avalon: fix the hash_count return
- avalon: fix the LOG_WARNING
- avalon: add comment on hash_count
- avalon: WORKAROUND on hashrate
- avalon: update max miner_num
- avalon: add more info on api
- avalon: add nonce_elf and more info on match miner_num
- avalon: change reset to 300ms
- avalon: move bulk buffer to it's info structrue
- avalon: more work on hashrate and read_count
- avalon: add baud 38400 support
- avalon: fix nonce_range EB
- avalon: fix the hashrate wrong
- more info on avalon API
- avalon: fix the nonce_range EL
- avalon: fix the read count
- avalon: more work on nonce_range
- avalon: read() times and send delay fixed
- avalon: add the send delay option
- avalon: print out fan/temp info
- avalon: add the result info (fan/temp etc)
- avalon: more check on hardware error
- avalon: more work on get_work_count
- avalon: now we have dynamic get_work_count
- avalon: more work on parameters
- avalon: add timeout parameter
- avalon: baud as parameter now
- avalon: send work pitch should be : (15*(8+2)*4/19200)s
- avalon: more work on match work
- avalon: fix free_work
- avalon: continue on reset work. wait for buffer empty
- avalon: add options, if write() error. sleep(1) before reset()
- avalon: more cleanup
- avalon: finish read when Buffer empty
- avalon: fix the nonce EB issue
- avalon: MORE work
- avalon: fix the EB/LB issue
- avalon: some cleanup
- avalon: fix the first configure task
- more work on the avalon buffer
- avalon: fix the BIG_ENDIAN issue
- avalon: Fix the buffer statu
- change defines to avalon parameters
- fix the cts return
- avalon: change the data to uint8_t, add some test temp code
- avalon: fix task init
- avalon: more data format work
- change to avalon data format
- debug: add a debug hexdump.c
- avalon: add some code on match work
- avalon: try to correct the pool_status and dev_status
- avalon: more work on multi-works
- avalon: more work on read
- avalon: more work on get results
- more RTS code on avalon.c/h
- more RTS code
- avalon: some cleanup
- avalon: more work on new work queue structrue
- fpgautils.c: use lancelot as target
- avalon: since we submit task as bulk data. modify again
- add scanhash_queue
- renmae avalon.h to driver-avalon.h
- fpgautils.c: add get_serial_cts
- understand the avalon protocol more
- avalon: new software structrue but target as lancelot
- add avalon.h
- avalon: fix warning
- avalon: add TODO comments
- more AVALON defines
- avalon: more work
- add driver-avalon.c
- add avalon support to automake
- Default to work queue mode on BitForce SC devices
- bitforce: Implement support for non-contiguous XLINK slave addressing
- gnulib: stdint: fix build with Android's Bionic fox x86
- gnulib: stdint: Improve support for Android.
- gnulib: stdint: Add support for Android.
- Check for ?e##toh macros independently from hto?e##
- If pthread_cancel is missing/emulated, set asynchronous thread cancel type on
stage, watchdog, watchpool, and longpoll threads since the emulation cannot
support deferred cancellation
- If pthread_cancel is missing (Bionic/Android), emulate it using pthread_kill
and pthread_exit
- configure: Intelligently detect what flags/libs get us working pthread, and
define HAVE_PTHREAD_CANCEL if pthread_cancel is available
- Bugfix: Initialize mutex_request to invalid so devices that don't use it
(bitforce) don't try to
- RPC: pools: Add "Message" to show last client.show_message received over
stratum
- Stratum: Support client.show_message method
- Don't retry without resume support, if the first attempt just timed out
- Bugfix: minerloop_async: Intelligently handle work updates and device disables
during transitions
- Bugfix: minerloop_async: Free old (unused) prepared work when replacing it
with an upgraded one
- Bugfix: Free pool sessionid before replacing it
- Bugfix: Stratum: Address dereference-after-free and memory leak introduced in
resume support
- Stratum: If old protocol fails as well, try to resume again next time around
- Bugfix: Stratum: Only failover to old mining.subscribe protocol if the
previous attempt was the new one (fixes a flood of retries)
- Try to extract the sessionid associated with mining.notify on 3rd level array
and submit it along with the userid to support mining resume, failing gracefully
and restarting if the pool rejects it.
- Cope with misread sessionid on stratum for now.
- Use the sessionid as passed on stratum connect to attempt to resume a
connection once and then clear it if it fails, to use a new connection.
- Move to storing the nonce1 in the work struct instead of the sessionid for the
now defunct first draft mining.resume protocol.
- Only continue submitting shares with mining.resume support on stratum when the
session id matches.
- Provide support for mining.resume with stratum, currently re-authorising after
successful resumption pending finalising of the protocol process.
- Provide basic framework for restarting stratum depending on whether resume
support exists or not.
- Abstract out the setting up of the stratum curl socket.
- Remove redundant setting of strings to NULL since the whole work struct is
zeroed.
- Only clear stratum shares mandatorily on stratum dropouts when the pool does
not support resume.
- Stratum: Keep trying to submit shares, even across reconnects
- Use new select loop primitives in submission thread
- Bugfix: Missing pool_no parameter to applog for no-stratum-sessionid debug
message
- Do as much outside of mutex locking of sshare_lock as possible.
- Remove last reference to struct work used outside the sshare_lock in
submit_work_thread
- Unlock the sshare_lock in submit_work_thread when all references to work and
sshare are complete.
- Bugfix: Copy and free sessionid on work objects
- Add timestamps to stratum_share structs as they're generated and copy the
stratum sessionid if it exists to stratum work generated.
- Store session id for stratum if the pool supports it for future mining.resume
support.
- Keep the unique id of each work item across copy_work to prevent multiple work
items having the same id.
- x6500: Never consider processors idle if they're enabled
- x6500: Make mutex management cleaner by blocking device select loop during
idle get_stats
- Bugfix: minerloop_async: Always refer to real thread for select loop
- Bugfix: Initialize work_restart_notifier[1] to INVSOCK instead of -1 to be
portable
- ztex: Use restart_wait to react quicker to work updates
- Handy TIMEVAL_USECS macro
- Restore blocking restart_wait function with nearly identical semantics as old
one
- Bugfix: bitforce: Rework sleep delay adjustment logic to properly deal with
more accurate timing readings (added in device API update)
- Hidden --force-rollntime option for getwork pools (use like --pool-priority,
after each pool definition)
- Include processor id in get_work logging
- Support for BIP23 BPE request target extension via new --request-diff option
- Hidden option to reduce "work update" messages to debug level:
--quiet-work-updates
- Change "work restart" to "work update" in messages to reflect reality more
accurately (no work is lost), and normalize case of "longpoll"
- HACK: Since get_work still blocks, reportin all processors dependent on this
thread
- Move FD_SETSIZE definition to configure so it affects everywhere it needs to
- Move absolute_uri function to util.c
- Remove now-unused blocking-wait code (restart_cond, restart_wait, and
stale_wait)
- Bugfix: bitforce: Zero hashes complete if we get an invalid response
- HACK: Since get_work still blocks, reportout all processors dependent on this
thread
- bitforce: Support for work queue protocol on BitForce SC devices
- Use new double-stage format for SC devices
- modminer+x6500: Expose frequencies to API in terms of MHz to be consistent
with ztex driver and cgminer
- bitforce: Replace (bool)cgpu->nonce_range with (enum)bitforce_data->proto
- bitforce: XLINK support for multiple processors
- bitforce: Prepare log messages for XLINK by separating into proc and dev
messages
- bitforce: Always use fd/mutex pointers on actual device, to prepare for XLINK
support
- bitforce: Get fd/mutex pointers only once per function
- bitforce: Abstract commands to bitforce_cmd1 (single-stage) and bitforce_cmd2
(double-stage) functions
- bitforce: Debuglog device information during detection
- Bugfix: Missing includes needed on Windows
- Bugfix: Use waddstr instead of wprintw to display completed device summary
line, so literal %s don't get interpreted as formatting options
- Bugfix: bitforce: Avoid polling continuously between work restart and job
completion
- bitforce: Use poll device API when job_get_results needs to wait
- bitforce: Use poll device API when job_start needs to wait
- stale_work_future function to determine in advance if a work/share will be
stale at some future time
- bitforce: Minimally refactor to adapt to new minerloop_async
- minerloop_async: Break out of select on work_restart_notifier
- Replace UNIX-only work_restart_fd pipe with portable work_restart_notifier
- Bugfix: Clean out unused variables from minerloop_async
- Move new device API code to new deviceapi.c source file
- Make minerloop_async more async, using some callbacks to handle event
completions
- Split part of minerloop_async into do_get_results, and a bit other
reorganization
- Abstract select_timeout function to convert a realtime timeval to a timeout
pointer for select()
- Split part of minerloop_async into do_process_results, and don't allow
api->job_get_results to return hashes
- Split part of minerloop_async into do_job_prepare and do_job_start
- Initialize thr->tv_poll to -1 (disabled)
- Update the hashmeter one last time before disabling a device
- minerloop_async: Break out of select for wakeup notifications
- Replace mining thread queues (which were only used for wakeup pings) with
notifiers (which can be used with select and co)
- Unify all mining thread wakeup to mt_enable (simplifying code)
- Bugfix: get_statline: Correct device summary status, only showing DEAD or OFF
if it affects all processors
- Working processor disable/enable with new async minerloop (currently gets
stuck if all processors disabled)
- Bugfix: get_statline: Only care about the processor status if
--show-processors is set
- Bugfix: watchdog: Use processor thr_info even if it isn't a real thread
- Only support thread-per-device or N-threads-per-processor; simplify
work_restart check
- x6500: Remove mutex, since driver is single-threaded now
- Bugfix: Update utility every get_statline call, and include every processor
involved
- HACKING: New text file to document the internal workings of (currently) the
device API
- Bugfix: mining_threads is now a total of thr_info objects, not necessarily
actual running threads
- x6500: Working (but incomplete) asynchronous/single-threaded driver
- Incomplete (but workable) asynchronous minerloop
- Core support for managing multiple processors from a single thread
- Allow device drivers to implement their own minerloop
- Move cgpu_info and thr_info initialization to main, and ensure all get
initialized before starting any threads
- Refactor and simplify miner_thread (no major behavioural changes)
- Move difficulties to end of share result message, so they can be made to line
up nicely
- Bugfix: Consolidate share result message code (including fixing displayed
hash portion for stratum)
- miner.php: Include ProcID in Device column as a letter
- Show summaries per-device unless --show-processors is used (also available on
Display TUI menu)
- Order next_proc linked list in processor id order
- Consolidate processor summary line generation for TUI and text-only modes
- RPC: Update to include ProcID so multiprocessor devices can be understood
correctly
- RPC: Common function for adding device-identifying fields
- modminer: Make single-processor statline look like other temperature-only
statlines
- modminer: Split each FPGA into its own logical processor (in the same device
still)
- modminer: Get mutex pointer only once per function
- ztex: Combine master+slave devices into a single multiprocessor device
- Preformat dev_repr (device representation) and proc_repr (processor
representation) once for use everywhere
- x6500: Split each FPGA into its own logical processor (in the same device
still)
- x6500: Get mutex pointer only once per function
- Minimal support for defining devices with multiple logical processors
- Rename all README files to standard README.* style


BFGMiner Version 2.10.6 - April 5, 2013

- Bugfix: Restore missing variable
- Bugfix: openwrt: Never include _ in platform name
- Bugfix: Fixed typo in bfgminer-rpc usage
- pool_active: Ensure temporary curl is always cleaned up
- Try to find jansson via pkg-config first, and fall back to checking system
defaults if that fails
- Attempt to find libjansson via pkg-config if AC_CHECK_LIB fails
- Update scrypt readme re drivers and sdk.
- Bugfix: README: Move --device out of GPU only options
- Update .gitignore
- Added bfgminer-rpc binary to .gitignore
- Bugfix: Actually change to the newly selected pool when statum is inactive and
it decides to change
- Bugfix: modminer: Properly fail on dynclock error
- Bugfix: opencl: Clean pc_data->work before freeing pc_data
- Bugfix: Correct order of libblkmaker libraries so static builds work
- Bugfix: Need to ensure __BIG_ENDIAN__ is defined before including uthash.h
- Bugfix: Stratum: When destroying cURL easy handle, be sure to clear pool
stratum_curl pointer
- Bugfix: bitforce: Fix warning
- Bugfix: Stratum: Properly handle non-integer "id" for client.get_version
requests
- json_dumps_ANY utility function to portably implement json_dumps(..., ... |
JSON_ENCODE_ANY)
- Bugfix: bitforce: Free old name when updating it on reinitialization
- Stratum: Include pool number in send/recv protocol logging
- Include pool number in stratum thread name
- API always report failed send() replies
- API.java allow partial reads
- Bugfix: Stratum: Use curl_easy_cleanup to close connection, so cURL
understands what is going on
- Bugfix: hash_pop: If a work should be rolled, use a clone of it rather than
consume a rollable work
- openwrt: Move Makefile into a bfgminer subdirectory to avoid symlinking issues
- openwrt: Use --with-curses=ncurses to avoid ncursesw dependency
- configure: Support --with-curses=FOO to look for curses implementation in
libFOO
- Set pool socket to INVSOCK after closing connection, just in case
- Clean up compiler warnings
- Bugfix: Check that pool is active one last time before selecting it
- Bugfix: Trim whitespace (like newlines) off the end of debug info from
libcurl
- Bugfix: submit_nonce: Backup the original work->blk.nonce since the miner
code uses it to track work consumption
- Bugfix: Scheduler needs to unpause disabled devices, even if it isn't waking
them up
- Bugfix: Use SOCKETTYPE for notifiers, to avoid potential overflow on Win64
- Bugfix: Some versions of MingW define localtime_r, but don't handle the
timeval.tv_sec case that we use; so undef any preexisting one and use our own
- Bugfix: reinit_gpu: Remember the selected device to correctly change
properties of
- Bugfix: cpu: reinit_device hasn't worked since 93b284d, so just remove it
entirely instead of letting it screw with thread 0
- Document necessity to run ldconfig and possibly configure ld.so
- Bugfix: Complete startup after just one pool is found active, no need to wait
for the rest
- Bugfix: Update links
- miner.php: Replace PGA dev number with concatenated device ID
- Bugfix: miner.php: Display devices with aligned columns instead of assuming
they come out of the RPC aligned
- Bugfix: miner.php: Silence PHP "local timezone" warning
- Bugfix: api-example: Try to use BSD sockets on any non-Windows platform
- Bugfix: stratum: Delay mining.get_transactions request until after auth has
succeeded, so its failure doesn't abort the connection (also avoids any delay
from a large result)
- --no-getwork option to disable getwork protocol support
- Clarify dependencies with Debian/Ubuntu package names


BFGMiner Version 2.10.5 - February 8, 2013

- Bugfix: Actually increment template_nonce when we use it
- Change file modes.
- Fix logic fail on partial writes with stratum send that was leading to corrupt
message submissions.


BFGMiner Version 2.10.4 - February 7, 2013

- New platform ports: OpenWrt and Win64
- Update official Windows build compiler and libraries:
- - Upgrade GCC from 4.6.3 to 4.7.2
- - Upgrade libusbx from 1.0.10 to 1.0.14
- - Upgrade jansson from 2.3.1 to 2.4
- - Upgrade libcurl from 7.26.0 to 7.28.1
- - Upgrade pthreads-win32 from 2.8.0 to 2.9.1
- Bugfix: Release libudev handle when ID_MODEL doesn't match what we're looking
for
- openwrt: Script to build for multiple platforms easily
- openwrt: Bitstreams should be "all" arch
- Working OpenWrt Buildroot Makefile
- Do not enable the pool disable on reject feature unless explicitly enabled
with --disable-rejecting.
- Check for calloc failure for completeness in gen_stratum_work.
- Cache the coinbase length to speed up stratum work generation.
- Cache the header length when generating stratum work to avoid calculating it
on every work generation, and to only need one alloc+sprintf, speeding up work
generation.
- Use heap ram for coinbase in gen_stratum_work, zeroing it before use.
- Provide a wrapper for aligning lengths of size_t to 4 byte boundaries.
- Bugfix: ztex: While 1.15y can finish highspeed FPGA config immediately, at
least 1.15x needs some delay
- Use CURLOPT_OPENSOCKETFUNCTION to intercept the socket being created for
stratum, in order to workaround CURLINFO_LASTSOCKET breakage on Win64
- make-release: Update for Win64 and bfgminer-rpc.exe
- Use localtime_r instead of localtime, including a Windows implementation that
handles Win64's broken struct timeval.tv_sec
- Use standard execv arg type on Win64
- Bugfix: Correct various size mismatches
- Ensure winsock2.h is always included before windows.h
- Bugfix: Add necessary Winsock library to bfgminer-rpc linking
- Bugfix: Remove dependencies of compat.h on miner.h for Windows (moves
timersub/timeradd to compat.h where it belongs)
- modminer: Raise default/maximum clocks to 210 and 250 respectively
- modminer: Use better-performing X6500 overclocker bitstream
- Disable libusb linkage/usage when neither X6500 nor ZTEX support is desired
- Add support for "--scan-serial all" via simply globbing /dev
- fpgautils: serial_autodetect implementation using sysfs
- fpgautils: Unified serial_autodetect function to find a serial device
regardless of the underlying method
- fpgautils: Look for bitstreams in ../share/bfgminer/ too
- Bugfix: Ensure curses library is always linked in NCURSES_LIBS, to avoid
unnecessary dependencies for (non-curses) tools
- Bugfix: GBT: work->data is always little-endian, but libblkmaker wants the
nonce in native-endian
- Bugfix: cpu: Corrections necessary to get 'c' and 'cryptopp' algorithms
working on big endian
- Bugfix: Sanity check for bits exponent in real_block_target
- Bugfix: cpu: Increment nonce after checking (rather than before), to avoid
skipping the first nonce of each scanhash call
- cpu: via: Only swap back the nonce, rather than all data
- cpu: Minor optimization by checking H==0 before calling fulltest
- Bugfix: Skip yasm check when building for non-x86 platforms
- Allow --scantime alias to --scan-time
- Build bfgminer-rpc program from api-example.c
- Bugfix: Remove miner.h include from api-example.c since it isn't needed and
pulls in libblkmaker
- Make wrapping consistent at 79-80 characters per line
- Bugfix: Correct numerous misspellings, typos, etc
- Bugfix: Prefer using a non-frozen mining thread for watchdog
- Bugfix: x6500: Expose x6500_fpga_data even if JTAG reset/detect fail, since
it is still used to store temperature info if the other FPGA initializes
- Adding ZTEX Windows guide from Jason Snell


BFGMiner Version 2.10.3 - January 22, 2013

- Revert "x6500: Whenever we get a hardware error, purge buffers just in case
of read/write desync"
- Bugfix: libblkmaker: Check that zero-padding on base58check input matches
output (needed to properly reject addresses with too many or too few prefix/pad
'1's)
- Bugfix: Free bin2hex output in __update_block_title
- Bugfix: Allocate space for the terminating null byte on new current_hash
- Display tail end of prevblock hash rather than start+32bits
- Try to extract block height from coinbase scriptSig, when mining stratum
- Display next block height when using GBT
- Use suffixes for target-difficulty also, in share accept/reject loglines
- Bugfix: Implement common target_diff function, fixing scrypt-specific bugs in
and simplifying common code shared by set_blockdiff, calc_diff, and share_diff
- Set DISPLAY to :0 by default (on non-Windows)
- Bugfix: Reset pool bytes received when zeroing stats
- miner.php trim trailing zeros on some of the STATS numbers
- Semi-Cherrypick: API stats - include pool network bytes + in miner.php
- Best Share readme
- API zero - zero statistics - all or bestshare - with optional on screen
summary
- api.c pgaenable not re-enabling the device - plus related debug
- diffexactone pool diff1 used for share value calculation is ffffffff... not
100000000... :P
- miner.php user/pass fix 'usr' is readonly
- miner.php optional user/pass login restrictions
- zero (most) API stats
- Remember best share per pool and return in API pools
- ztex: precheck the secondary solutions to avoid hw errors the ztex bitstreams
gives back the latest checked nonce and its hash7 value and two possible
solutions.
- Bugfix: configure: if blocks require at least one command, so fill with true
- Bugfix: Only log stratum resume if it was actually "idle" before
- Zero the best share string memory when zeroing stats.
- Change the pool stratum socket buffer to new cgminer implementation, to
allocate it in a grow-only fashon and reduce virtual memory fragmentation at
the expense of CPU time.
- Differentiate socket full from sock full.
- Allow stratum to startup without notify but check it is valid before creating
stratum work.
- Do not try to generate stratum work unless the notify command has succeeded.
- Document Mac OS X configure usage with Homebrew pkg-config path
- Clean up post-configure display of compile environment
- Bugfix: If native ncurses detection fails, print "none?" result before moving
on to try AC_SEARCH_LIBS scan
- Fix more printf-format non-compatibilities
- Update windows-build.txt


BFGMiner Version 2.10.2 - December 27, 2012

- Update documentation to include block difficulty
- Reset all stats when requested
- Reset total diff1 shares when zeroing stats as well to show correct work
utility.
- Update documentation.
- Parse anything in the stratum socket if it's full without waiting. Empty the
socket even if a connection is not needed in case there are share returns.
- Provide a mechanism to zero all the statistics from the menu.
- Display the current pool diff in the status line.
- Display block diff in status line.
- Generalise the code for solving a block to enable block solve detection with
scrypt mining.
- Generate the output hash for scrypt as well and use the one function to set
share_diff.
- Use one size for scratchbuf as a macro in scrypt.c
- Remove the unused sha224 functions.
- Check staged_rollable under staged lock, when cloning available work.
- scrypt_diff uses a uint64_t as well.
- Correct target for stratum support with scrypt mining.
- Bugfix: Ensure nonces are put in data as little-endian in test_nonce*
- Add low-level debugging info for data_buffer (some only enabled with
-DDEBUG_DATABUF)
- Make all_data_cb fwrite-compliant by returning nmembs, and check for unlikely
overflows
- Bugfix: Need to do extract_sockaddr before trying to initiate stratum
(erroneous http URI usage, except at startup)
- Bugfix: Update last GBT work in pool_active before staging it, since otherwise
it could possibly be consumed before we copy it
- Bugfix: Address Windows-specific formatting issues (including lack of support
for %ll*)
- Bugfix: ztex: Correct formatting for reset failure error
- ztex: Fix formatting in a debug message
- cairnsmore: Don't bother timing dynclock detection, since there's no standard
way to log it accurately
- Correct formatting in FPGA drivers
- opencl/adl: Fix formatting to fit strict rules
- Explicitly cast all_data.buf to char* for debug printing
- Follow strict time_t handling rules
- Use GNU format-checking attribute when available for applog


BFGMiner Version 2.10.1 - December 21, 2012

- libztex: fixed a typo
- libztex: check returnvalue of libusb_claim_interface() and release the
interface in case of early exit
- Bugfix: submissions: Skip FD_ISSET when fd==-1 (let the next select setup deal
with cleaning them out)
- Bugfix: Remove sws from write_sws list when discarding it due to pre-send
stratum disconnection
- Bugfix: Shutdown stratum socket when initiate fails, so it doesn't linger
- Bugfix: Clear stratum receive buffer when initializing, in case there was
extra unprocessed data in it from a previous connection
- Stop all work from the current pool if it's a stratum pool once it is
disconnected since it will be invalid upon reconnecting.
- Discard all staged work from stratum pools as well as the shares upon
disconnection since all the work becomes invalid.
- Use correct cbreak after 15 second delay when no pool is found alive.
- modminer: Set default clock frequency to user request so it sticks better
- modminer: Make valid frequency range consistent: 2-230
- Allow stratum to work with scrypt.
- MMQ add api pgaset for clock
- API V1.23 - new pgaset command, to be used soon
- Protect the best_share/best_diff values under control lock.
- Bugfix: modminer: Return failure to change frequency when device reports it
- opencl: Look in the right place for OpenCL library on Mac OS X
- Bugfix: AC_C_BIGENDIAN is reported to have problems, and invasive even if
buried in a conditional, so don't use it
- Bugfix: Check for bswap_* first, to avoid redefinition based on other variants
- Bugfix: autoheader isn't smart enough to figure out variable defines, so use
AH_TEMPLATE for each possible header
- Check a stratum pool hasn't gone dead while being a backup pool and missed
having its idle flag cleared.
- Fix null pointer issue when one chip on an X6500 is not initialized yet when
reading temperature.
- Hot-patch broken libcurl pkgconfig CFLAGS found in libcurl's Windows binaries
- Update OpenCL 1.2 headers from http://www.khronos.org/registry/cl/api/1.2/
- Reorganize detection of platform byteswap macros and endian to be more robust
using autoconf
- Move new bandwidth-based Efficiency to status line
- Replace work-based efficiency with new bandwidth-based efficiency
- Bugfix: Pull out GBT request collapsing since it is no longer needed with new
get_work main loop
- Bugfix: Free unused work when waiting on external GBT request
- README: Explicitly mention automake dependency
- README: Update AMD APP SDK URIs
- Bugfix: Free shares discarded before beginning submission
- Bugfix: Discard stratum shares waiting for a writable socket, if the pool
disconnects in the meantime
- Bugfix: Always let watchpool thread handle dead pool recovery (including for
stratum-only pools)
- Bugfix: Avoid lingering stratum_auth when connection is lost
- API-README explain custom page extensions in miner.php
- miner.php add a sample group pool report
- miner.php allow where,group,having on cumstom pages
- Bugfix: Hook CURLOPT_DEBUGFUNCTION to count actual bytes sent/received by
libcurl
- Bugfix: Reset pool transparency_time when connecting to stratum
- Bugfix: Immediately discard shares found on disconnected stratum pools, since
there is no way to submit them
- Bugfix: Decrement total_submitting when stale shares are discarded before any
submission attempts
- Bugfix: Only try to compare stratum job_id for work that has a job_id (ie,
ones that came from stratum)
- Bugfix: Recheck has_stratum even if the pool hasn't changed, in case pool has
switched to another protocol in the process; also only delay 5 seconds before
retry if pool is the same
- Bugfix: Try GBT if no pool protocol is known (can occur in the process of
stratum failover to GBT)
- Bugfix: Correctly track discarded stratum shares, and log them as "disconnect"
in sharelog
- Check for EWOULDBLOCK when supported in send and recv as well.
- Use the raw send() command instead of curl_easy_send since curl raw socket
usage introduces random bugs on windows.
- Use raw recv() command in place of curl_easy_recv since the curl
implementation introduces random bugs on windows builds when the recv fails.
- miner.php when displaying a single rig, add prev/next rig buttons if they
exist, next to refresh
- miner.php allow custom page joins for STATS
- miner.php - include windows easyphp link
- driver-ztex: use the correct size for the swap array
- API stats - display pool byte transfer stats
- Pool store data transfer stats
- Benchmark incorrect work size
- ChangeLog refer to NEWS
- driver-ztex: search the complete noncerange based on the actual speed
- API-README update
- api use a dynamic io buffer, truncated before it reaches the current ~64k
limit


BFGMiner Version 2.10.0 - December 11, 2012

- Bugfix: Free work before replacing it with clone
- Bugfix: Since we are using pipes for select notifier on *nix, we need to use
read/write there
- Bugfix: Winsock needs send/recv for sockets, not write/read
- Bugfix: opencl: Initialize pc_data to avoid clean_work checking uninitialized
pointers
- Bugfix: Correct parenthesis in bind() call in Windows notifier_init
- Include Windows error messages in notifier_init errors
- Include prctl header for thread renaming to work.
- Set tv_idle time if a pool is not active when input from the menu.
- minor unlikely zero pointer test
- BeaverCreek doesn't like BFI INT patching.
- Only stratum pools that are idle need to be kicked via cnx_needed.
- Do not do any setup if opt_api_listen is disabled in api.c.
- libztex: in case the selectFpga() failed set the selected fpga to unknown
- Only set the lagging flag for select_pool() on failed getwork if we're not in
opt_fail_only mode.
- driver-ztex: support for broken fpga on a multifpga board
- libztex: use a function for the twice called firmware reset code
- libztex: removed an unused struct member (ztex->valid)
- Set the pool lagging flag on startup to avoid it being shown initially, and
only unset it once the maximum number of staged work items has been reached.
- libztex: Include compat.h for substitute libusb_error_name (on older libusb
versions missing it)
- Suppress warning about "succeeded" not being used in finish_req_in_progress
for now
- Bugfix: Always give the get_work thread a curl, regardless of other
outstanding curls in use
- Bugfix: Failover after even a single job-request failure (or else it takes
too long on timeouts)
- Bugfix: Need to remove and re-add curl easy handles from multi to start a new
request
- Access total_submitting under mutex lock to avoid any potential races, and
increment it as soon as we queue the submission up
- Just leave the submit_work thread running persistently
- Bugfix: Restore work->pool after prepare_rpc_req since clean_work now clears
it
- Bugfix: Now that stage_work is trying to manipulate staged_work in the same
thread, clone_available needs to stage it outside of its own lock
- Make main() the getwork scheduler once everything is set up, so that all app
exits use the kill_work and quit paths.
- Set successful connect to true on auth stratum to allow summary on exit from
single stratum pool.
- Hash_pop should signal further waiters on its own pthread conditional in case
there are multiple waiters.
- Check the job_id has not changed on stratum work when deciding if the work is
stale as might occur across disconnections.
- Perform pool_resus on getwork pool that generates work in getwork_thread.
- Set pool lagging message for getwork pool that falls to zero staged in getwork
thread.
- Stage extra work when the primary pool is a getwork pool without rolltime.
- Do not try to clean up twice if kill message is given.
- Only recalculate total_staged in getwork thread if required.
- Include the correct config header in libztex and include it before other
includes.
- Implement a completely new getwork scheduler. Stage all work from the one
thread, making it possible to serialise all requests minimising the number of
getworks requested or local work generated. Use a pthread conditional to wake up
the thread whenever work is removed to generate enough work to stay above the
watermark set by opt_queue. Remove all remnants of the old queueing mechanism,
deleting the now defunct queued count.
- Bugfix: Clean up share hashing and target checks, fixing share difficulty
calculation for above-target would-be-shares
- Use templates from pool_active and longpolls without fetching more
unnecessarily
- Try to avoid requesting GBT jobs when there is already a request in progress
that will likely provide sufficient work
- Reuse most recent GBT job if in get_work_thread if it isn't stale
- libztex: fixed some warnings and removed some whitespaces
- Remove all references to the now unused workio_cmd structure.
- Remove the old workio command queue thread, replacing it with a kill
conditional to exit the program.
- Remove getwork command from workio_cmd queues and do them directly from
queue_request.
- Begin tearing down the old workio command queues by removing submit commands
from there and submit them asynchronously via their own threads.
- driver-ztex: changed two pairs of malloc()/memset() to calloc()
- libztex: Read bitstream file in 2kb blocks with simpler and faster code
- Added the binary versions of ztex_ufm1_15d4.ihx and ztex_ufm1_15y1.ihx
- libztex: Add firmware download support for ZTEX 1.15d and 1.15x
- libztex: Factor out local version of libusb_get_string_descriptor_ascii()
- libztex: Don't return error when a bitstream was already configured
- libztex: Read bitstream file in 64kb blocks with simpler and faster code
- libztex: Verify that the mining firmware is not a dummy firmware
- libztex: Match mining firmware ZTEX descriptor against the dummy firmware
- libztex: Start download sequence only after reading in the new firmware
- libztex: Download mining firmware to all devices with dummy firmware
- Update windows build instructions.
- Set pool probed to true on successful authorisation with stratum to avoid it
being pinged later.
- Style changes.
- Allow pool active to be called on stratum or disabled pools in the watchpool
thread if the pool has not been probed.
- lock (most of) the threaded statistics updates
- README stats don't add up
- Rearrange summary lines and include count of active submissions in progress
- Defer submissions instead of blocking in pop_curl_entry
- Run a single share submission thread asynchronously submitting all shares in
parallel
- Handle share submissions asynchronously, one at a time (still threaded)
- Split up json_rpc_call so it can be used asynchronously in libcurl-multi
- Split submit_upstream_work into _request and _completed stages, pulling out
json_rpc_call
- Bugfix: Adjust USB_* variables to new LIBUSB_* names
- Bugfix: Avoid double-free due to realloc_strcat moving memory around
- Bugfix: Stratum connections might be needed for share submissions up to a
minute after the last time they are used to generate work
- Bugfix: Clean work before trying to generate new stratum work on top of it
- Bugfix: modminer: Get rid of useless usbutils include
- Make need connection return true if a pool is idle.
- New --skip-security-checks option to allow miners to skip checks when it
saves bandwidth
- Skip stratum transaction download when there are no transactions
- API add Best Share to summary
- API lock access to some summary statistics (and copy them)
- Enable backup stratum connections for getwork when the primary pool doesn't
have longpoll aka solo mining.
- Check for correct absence of opt_fail_only in cnx_needed.
- Remove unused variable.
- The specification for stratum has been elaborated to say that a changed diff
applies only to new work so do not retarget when submitting shares.
- Suspend stratum connections to backup pools when there is no requirement to
potentially grab work from them.
- Rename rename_thr to RenameThread to match cgminer
- modminer: Adopt symbolic command names from kanoi
- Make gen_stratum_work more robust by using a dynamically allocated array for
the header in case bogus data is sent by the pool to avoid overflowing a static
array.
- scrypt_diff now returns a uint64_t
- Support monitoring and reporting much higher diffs for scrypt mining,
truncating irrelevant zeroes from displayed hash.
- Pass ostate values around in scrypt to be able to extract full hashes if
needed later on.
- Revert "Handle crash exceptions by trying to restart cgminer unless the
--no-restart option is used."
- Provide helper function realloc_strcat to extend arbitrary length arrays
based on string length.
- Use base_work for comparison just for cleanness in __copy_work
- Remove all static work structs, using the make and free functions.
- Add pool no. to stale share detected message.
- Add info about which pool share became stale while resubmitting.
- Reduce extra slots in the max backlog for ztex to minimise memory waste.
- Get rid of unused last_work in opencl thread data.
- Do away with the flaky free_work api in the driver code which would often lose
the work data in opencl and simply flush it before exiting the opencl scanhash.
- Minor work handling restructure, including moving some stratum data from
fixed-size buffers to their own heap allocations.
- opencl: Use new dev_error function for REASON_DEV_NOSTART
- Provide rudimentary support for the balancing failover strategies with stratum
and GBT by switching pools silently on getwork requests.
- Convert remaining modminer and bfl uses of usleep to nmsleep.
- Convert libztex to nmsleep where possible.
- Convert unreliable usleep calls to nmsleep calls in ztex driver.
- Tidy up device error counts
- Only increase gpu engine speed by a larger step if the temperature is below
hysteresis instead of increasing it to max speed.
- Convert pool not responding and pool alive message on backup pools to verbose
level only since they mean a single failed getwork.
- Use stratum block change from backup pools as an alternative to longpoll for
pools that don't support LP.
- Round some more static string arrays to 4 byte boundaries.
- There is no need for the static arrays to be larger than required, so long as
they're 4 byte aligned to appease ARM.
- Hash1 is only used by the CPU mining code and never changes so remove it from
the work struct and bypass needing to process the value for all other mining.


BFGMiner Version 2.9.5 - December 11, 2012

- Bugfix: Copy share hash to work->hash before doing 4-byte flip required by
fulltest
- driver-ztex: libztex_setFreq() must be called before ztex_releaseFpga()
- libztex: Make log messages say bitstream when refering to bitstreams
- Increase FD_SETSIZE to 4096 on Windows
- Bugfix: Use AC_PROG_CPP in libusb include subdirectory detection for improved
portability
- Bugfix: Free input memory after prioritising pools in TUI
- Bugfix: Free filename entry for writing config file when done with it
- Bugfix: Free stratum nonce1 before replacing it with new value on reconnect


BFGMiner Version 2.9.4 - December 4, 2012

- Update libblkmaker to 0.2.1
- Count template number, and append it to the coinbase of templates without any
cbtxn
- Bugfix: bitforce: Always increment global hw error counter when incrementing
device hwe
- Bugfix: Correct order of printf-style arguments in cbappend fail
- Bugfix: Capitalize "MHz" correctly
- ztex: Correctly release mutex and reset FPGA if configuration fails
- ztex: Harmonize low-speed FPGA configuration code with high-speed code
- libztex: Silence warning: comparison between signed and unsigned
- Count longpoll decodes as queued work since the count otherwise remains
static.
- Bugfix: Assign header-based rolltime before decoding work, so GBT expires
overrides it properly
- Look for libusb_init in -lusb, since FreeBSD has it there
- Bugfix: Use pkgconfig for libusb when available, and try to guess the include
path if not
- Bugfix: FPGA-README: Correct idVendor in example MMQ udev rule
- fixes target calc for mips openwrt
- Bugfix: clear_work: Whether the template is in fact being freed or not, the
work reference to it needs to be
- libztex: Work around ZTEX USB firmware bug exposed by the FreeBSD libusb
- README: Document solo mining usage
- README: Update dependencies
- Bugfix: We should never roll stale work
- Ubuntu: Removing erroneous libssl dep again. GITHUB#94
- Bugfix: Clear out stratum share work before freeing it
- Provide rudimentary support for literal ipv6 addresses when parsing stratum
URLs.
- Do not attempt to remove the stratum share hash after unsuccessful submission
since it may already be removed by clear_stratum_shares.


BFGMiner Version 2.9.3 - November 16, 2012

- Bugfix: Properly process new stratum jobs through test_work_current, even if
old shares are still accepted, and copy submit_old flag correctly
- Ensure pdiff 1 is always caught regardless of bdiff precision, and ceil all
other cases to ensure we never lose valid shares
- Check against a double for current pool diff.
- Support for fractional diffs and the classic just-below-1 share all FFs diff
target.
- Check share target diff for best_share to be calculated when solo mining.
- Store the full stratum url information in rpc_url for correct configuration
file saving.
- Put in a hack to prevent dud work from sneaking into test_work_current being
seen as a new block.
- Reset the work->longpoll flag where it will affect stratum work items as
well.
- Bugfix: Stratum does not guarantee notify messages every minute, so extend
timeout to 2 full minutes
- Bugfix: Always honour libblkmaker time limits
- Always (debug)log when stratum template is updated by the pool
- Bugfix: When a stratum connection is interrupted, ensure all work/shares for
it are considered stale
- Bugfix: clear_sock should return on socket errors
- Bugfix: Force calculation of work_difficulty since set_work_target fails to
consider the pdiff<bdiff difference
- Bugfix: Minimal support for handling real difficulties from stratum server
- Bugfix: Never consider shares to be accepted if the submission response is an
error
- Bugfix: Always fail scrypt detection if Stratum is chosen


BFGMiner Version 2.9.2 - November 7, 2012

- Add endian swap defines for where missing.
- Only retarget stratum shares to new pool diff if diff has dropped.
- Bugfix: x6500: Use json_object_set_new to correctly count references to
per-FPGA RPC data
- Bugfix: modminer: Use json_object_set_new to correctly count references to
per-FPGA RPC data
- Bugfix: Only append newline when printing protocol data
- Bugfix: Use memchr to look for newlines in socket line data, since the buffer
isn't null terminated
- Bugfix: Ensure GETWORK_MODE_GBT isn't replaced with GETWORK_MODE_POOL
- Count lost stratum share submits and increase message priority to warning.
- Show which pool untracked share messages have come from.
- Sleep 5 seconds before retrying submit.
- Changes to build prototypes to support building on FreeBSD 9.1-RC2 amd64
- Count lost shares with stratum as submit stale lost.
- Discard record of stratum shares sent and report lost shares on disconnection
since they will never be reported back.
- Check that count of transactions received via stratum is reasonable
- Use realloc'd data_buffer to support stratum lines longer than 8 KB, and
parse stratum responses during auth
- Use mining.get_transactions to check for stratum pool transparency (actual
response ignored for now)
- ztex: Silence false "unexpected" hardware errors, and don't count them as hw
errors
- README: Update build instructions to reflect current reality
- x6500: Expose per-FPGA details to RPC API
- x6500: Implement support for --temp-target
- x6500: Increase default clock frequency to 200 Mhz, now that new bitstream
seems to run well around that
- x6500: Flush nonces in FPGA buffer at initialization to avoid false hw errors
on restart
- x6500: Release device lock sooner during initialization, before logging
initial frequency info
- x6500: Read temperature sensors after sending work, when enabled
- Bugfix: jtag: Fix optimized register reading code (it was reading an extra
bit before the last, corrupting outside the buffer)
- Implement new --force-dev-init option to force bitstream upload to modminer
and x6500 devices
- Bugfix: x6500: Include --scan-serial option even for x6500-only builds
- Bugfix: ztex: Include --scan-serial option even for ztex-only builds, so it
can be used to disable autodetect if needed
- FPGA-README: Discuss X6500 --scan-serial usage of cases where it may be
needed
- ft232r: If we are searching for a specific serial, pay no attention to the
product id
- x6500: Try a more flexible approach to applying dynclock logic
- Bugfix: dynclock: Use standard C struct initializer to handle initialization,
instead of memsetting memory to nulls
- x6500: Whenever we get a hardware error, purge buffers just in case of
read/write desync
- Bugfix: x6500: When purging ft232r buffers (during bitstream upload), also
clear JTAG delayed read counter to avoid any potential desync
- Bugfix: ft232r: Always flush writes before purging buffers, and empty local
read buffer when flushing ftdi read buffer
- There is no need for addrinfo any more.
- Fix filename for x6500 bitstream to match previous commit's rename
- Rename x6500 bitstream to match existing licensing naming setup
- x6500 dual temp sensor support
- x6500 is far more stable with its own bitstream


BFGMiner Version 2.9.1 - October 30, 2012

- When we find a block, always progress to it for mining
- Bugfix: Enforce --expiry, but split --expiry-lp for a longer expiry on
longpoll setups
- Bugfix: regeneratehash needs to compare hash segments in Little Endian, not
Big Endian
- Bugfix: Always fail scrypt detection if Stratum is working
- Bugfix: Scan for ft232r devices later, after console lock and other mutexes
are initialized properly
- ft232r: Debuglog non-FTDI device IDs found
- Bugfix: Wait to release JSON result in case of JSON-RPC error until we've
logged the error
- Bugfix: RPC: Defer release of JSON until after cmd is used
- Bugfix: Release JSON result in case of JSON-RPC error
- Bugfix: Release job JSON result as soon as we are done using it
- Bugfix: Release JSON received from RPC socket after we're done using it
- Bugfix: Use clear_work and workdup everywhere work is copied around
- Bugfix: Clear work before replacing it with new, to free any pointers
- server and client sockaddr_in are no longer used in struct pool.
- Set sshare id and swork_id within the sshare mutex to avoid multiple share
submits with the same id.
- Bugfix: Really use freeaddrinfo to clean up in extract_sockaddr
- Update documentation for X6500
- Bugfix: Free unused JSON returned when switching to Stratum
- Bugfix: Free unused work when switching to Stratum instead
- Bugfix: Use freeaddrinfo to clean up in extract_sockaddr
- RPC: Include PGA support for X6500-only builds
- RPC: Abstract code to handle any new device drivers as PGAs without special
support
- Bugfix: Release GBT submission JSON objects after dumping them
- Bugfix: Free old stratum_work data before replacing it
- Bugfix: Release memory allocated by prior stratum sockaddr extractions
- Bugfix: Clear work template when preparing a new request
- Bugfix: Initialize temporary stratum work
- Bugfix: x6500: jtag_read buffer needs to be initialized since reading JTAG
implies writing too
- Replace now-redundant accepted_weighed with equivalent diff_accepted
- Fail on select() failing in stratum thread without needing to attempt
recv_line.
- Add share to stratum database before sending it again in case we get a
response from the pool before it's added.
- Bugfix: modminer: Check that we have a valid fd before trying to start work
- Shorten the initiate stratum connect timeout to 30 seconds.
- Shorten the stratum timeout on read to 90 seconds to detect unresponsive pool.
- Display best share difficulty on exit.
- Make stratum socket fail more robust on windows by disabling the send buffer.
- Reuse the same curl handle forcing a new connection instead of risking
derefencing.
- Add information about submission failure to stratum send.


BFGMiner Version 2.9.0 - October 28, 2012

- modminer: Remove dead code
- Bugfix: Include headers in order needed for Mingw build
- Bugfix: Save pool pointer to avoid dereferencing work after it might
potentially be freed
- Bugfix: Cleanup some harmless warnings
- Bugfix: TUI: Avoid clearing the whole screen when we just want to clear the
log window
- Wishlist #130 implemented by "blinkier":
- - Add all-at-once pool priority reassignment to curses TUI interface
- - Save/restore pool priorities in config file
- - Allow setting initial pool priorities via command line
- Bugfix: Replace reportin hack with a reset back to LIFE_INIT for bitstream
upload
- Bugfix: SI kilo prefix is a lowercase "k"
- Bugfix: If userpass is missing a password, treat it as a null password
(regression fix)
- Upgrade libblkmaker to 0.2.0
- Bugfix: Build correct pay-to-scripthash script
- Implement --coinbase-addr for solo mining
- x6500: Since we program in about a minute now, only report status verbosely
every 25%
- x6500: Poll nonce less often since USB latency slows us down anyway
- jtag: Avoid writing an extra readback byte when we are ignoring tdo anyway
- ft232r: Set output buffer size to 4096 bytes
- x6500: Adjust dynclock so it works more reasonably
- x6500: Dynclock support
- Provide a simple/dummy libusb_error_name when it is missing (libusb < 1.0.9)
- x6500: Stop abusing pointer type to store bitstream upload progress
- Bugfix: ft232r: Avoid reuse of USB device count variable
- x6500: Implement basic hashrate prediction and efficient job completion
- jtag: Optimized implementation of JTAG reads to workaround ft232r slowness
- x6500: Try nonce with previous work if it is wrong for current
- x6500: Ensure ft232r buffer is flushed to change registers
- x6500: Start clock speed off at 180, and extra debugging for
x6500_set_register
- x6500: When programming, poll each FPGA status individually since they might
not be ready at the same time
- x6500: Various tweaks and hacks to get mining working
- Bugfix: x6500: Remove erroneous bitendianflip
- Bugfix: jtag: Handle ftdi-common environmental stuff properly
- jtag: Defer ignored reads a bit to avoid USB latency
- Bugfix: ft232r: First 2 bytes of every 0x40 are FTDI status or something
- x6500: Implement mining protocols (doesn't work yet)
- x6500: Cleanup dead code and implement bailout2
- x6500: Clean up and finish FPGA initialization
- x6500: Comment bitstream upload function better
- fpgautils: Abstract open_xilinx_bitstream out from modminer and x6500 drivers
- x6500: Get bitstream upload working
- Bugfix: jtag: Use the correct bit for reading/writing data streams
- ft232r: Buffer writes to improve performance
- x6500: Get FPGA probe working
- jtag: JTAG implementation for X6500 (over ft232r)
- ft232r: ft232r_read_all function to simplify exact-length reads
- ft232r: Implement read buffer so ft232r_read always works like read(2)
- ft232r: Complete necessary interfaces for X6500
- x6500: Bare minimum detection-only X6500 support via libusb
- Minor debian packaging fixes.
- Only add stratum share to database if we succeeded in submitting it, with a
debug output saying it succeeded.
- Use keepalive with stratum sockets to improve its ability to detect broken
connections.
- Show only the URL in the status bar to avoid long prefixes making for extra
long lines.
- Display compact status in menu and update README to reflect current menu
entries.
- Add a compact display mode that does not list per device statistics in the
status window.
- Add blank spaces after best share displayed.
- Round a few static string arrays up to 4 byte boundaries for ARM.
- Display best share diff for scrypt as well.
- Show the best diff share as "best share" and add info to the README.
- Display the best diff share submitted so far.
- Redundant check.
- The work struct pointer in struct pc_data in findnonce is never freed yet
there is no need to allocate it separately so make struct work a static part of
the struct pc_data. s
- No longer should hide --no-restart option if OpenCL support is missing
- Handle crash exceptions by trying to restart cgminer unless the --no-restart
option is used.
- Switch queued count when choosing a different pool from a failed stratum pool
in getwork thread.
- Put a mandatory 5s wait between reattempting a getwork on failure to avoid
hammering requests.
- Make sure to check pool stratum curl exists under lock before attempting any
recv to not risk dereferencing upon attempting to reinitiate stratum.
- Avoid redefining macros and align to 4 byte boundaries.
- API - add Stratum information to pools
- update FPGA-README for MMQ
- Time for dynamic is in microseconds, not ms.
- x86_64 builds of mingw32 are not supported directly and should just configure
as generic mingw32 builds since they're NOT 64 bit.
- Use 3 significant digits when suffix string is used and values are >1000.
- Get rid of unused warning for !scrypt.
- Use select on stratum send to make sure the socket is writeable.
- Cope with dval being zero in suffix_string and display a single decimal place
when significant digits is not specified but the value is greater than 1000.
- Pad out the suffix string function with zeroes on the right.
- Failure to calloc in bin2hex is a fatal failure always so just check for that
failure within the function and abort, simplifying the rest of the code.
- Provide locking around the change of the stratum curl structures to avoid
possible races.
- Bump opencl kernel version numbers.
- Remove atomic ops from opencl kernels given rarity of more than once nonce on
the same wavefront and the potential increased ramspeed requirements to use the
atomics.
- Clear the pool idle flag in stratum when it comes back to life.
- Display correct share hash and share difficulty with scrypt mining.
- Show work target diff for scrypt mining.
- Watch for buffer overflows on receiving data into the socket buffer.
- Dramatically simplify the dynamic intensity calculation by oversampling many
runs through the opencl kernel till we're likely well within the timer
resolution on windows.
- Align static arrays to 4 byte boundaries to appease ARM builds for stratum.
- Update documentation.
- Left align values that are suffix_string generated.
- Share_diff should not be converting the work data to hex.
- Update readme describing difficulty displayed on log lines.
- Off by one error.
- Prevent overflows of the port char array in extract_sockaddr.
- Disable stratum detection with scrypt.
- Display the actual share diff next to the pool required diff, using a suffix
creation function to prevent values of >1000 being shown in their entirety.
- Fix 4 * 0 being 0 that would break dynamic intensity mode.
- Supplement other 64-bit endian swap macros
- Bugfix: Fix htobe64 on big endian platforms that don't define it
- Fix lack of htobe64 on mingw32.
- Reinstate the history on dynamic intensity mode to damp fluctuations in
intensity but use an upper limit on how much the value can increase at any time
to cope with rare overflows.
- Update to cgminer's newer dynamic intensity algorithm
- Support for the stratum mining protocol.
- Simplify target generation code.
- Add support for client.get_version for stratum.
- Use a 64 bit unsigned integer on the diff target to generate the hex target.
- Update reconnect message to show whole address including port.
- Look for null values and parse correct separate array entries for url and port
with client reconnect commands for stratum.
- The command for stratum is client.reconnect, not mining.reconnect.
- Only copy the stratum url to the rpc url if an rpc url does not exist.
- Implement rudimentary mining.reconnect support for stratum.
- Ignore the value of stratum_active on calling initiate_stratum and assume
we're always trying to reinitiate it, and set the active flag to false in that
function.
- stratum auth can be unset if we fail to authorise on subsequent calls to
auth_stratum which undoes the requirement of setting it in one place so set it
in pool_active.
- Format Stratum submission-start debug the same way as other submissions
- Bugfix: Set work_restart_id in gen_stratum_work for when work is reused to
avoid thinking it's all stale.
- Only auto-switch to Stratum internally, but save HTTP URI in case pool stops
using Stratum; also always shows original pool URI on RPC
- SHUT_RDWR is now always defined for us, so no need to check ifdef on LP hang
- Implement --no-stratum option to disable autodetection
- Show Stratum pools as "Strtm" protocol in "Pool management" TUI
- Bugfix: BFGMiner doesn't use rpc_proxytype
- Remove free that could segfault.
- Use the stratum url as the rpc url advertised if we switch to it.
- Count an invalid nonce count as a hardware error on opencl.
- Count each stratum work item as local work.
- Cope with one stratum pool being the only active pool when it dies by sleeping
for 5 seconds before retrying to get work from it instead of getting work
indefinitely.
- Detect stratum outage based on either select timing out or receiving an empty
buffer and properly re-establish connection by disabling the stratum_active
flag, coping with empty buffers in parse_stratum.
- Fix various modminer warnings on mingw.
- Fix sign warning on windows build for bitforce.
- Cast socketfail to integer since SOCKET is an unsigned int on windows.
- Use the stratum thread to detect when a stratum pool has died based on no
message for 2 minutes.
- Only set the stratum auth flag once and once the stratum thread is started,
use that to set/unset the stratum active flag.
- Only hand off to stratum from getwork if we succeed in initiating the
protocol.
- Target should only be 32 bytes copied.
- Use a static array for work submission data instead of stack memory.
- Clear the buffer data before sprinting to it.
- Clear work stratum strings before setting them and add them to debug output.
- Drop stratum connect failed message to verbose level only since it's a regular
probing message.
- TCP Keepalive in curl is only in very recent versions and not required with
regular messages on stratum anyway.
- Move stratum sockets to curl infrastructure with locking around send+recv to
begin support for proxies and ssl.
- Make detect stratum fail if a proxy has been set up.
- Stratum does not currently have any proxy support so do not try to switch to
stratum if a proxy has been specified.
- Windows doesn't work with MSG_PEEK on recv so move to a continuously updating
buffer for incoming messages.
- Alloca is unreliable on windows so use static arrays in util.c stratum code.
- Begin support for mingw stratum build.
- Add space to reject reason.
- Parse the reject reason where possible from stratum share submission.
- Pass json error value to share result function to be able to parse reject
reason in stratum.
- Don't try to parse unneeded parameters in response to mining.subscribe.
- Remove the sshare hash entry if we failed to send it.
- Change notify message to info level to avoid spamming repeatedly when a pool
is down.
- Check the stratum pool difference has not changed compared to the work diff
when testing whether a share meets the target or not and retarget if necessary.
- Bit error in target calculation for stratum.
- Offset the current block detection to the prev block hash.
- We should be testing for id_val, not id in parse stratum response.
- Make target on stratum scale to any size by clearing sequential bits according
to diff.
- Correct target calculation in gen_stratum_work.
- If a share result has an error code but still has an id, it is likely a
reject, not an error.
- Initiate stratum the first time in pool_active only, allowing us to switch to
it on getting a failed getwork and detecting the presence of stratum on the url
at that time.
- Use 5 second timeout on sock full for now as a temporary workaround.
- If no stratum url is set by the end of the detect stratum routine, copy the
sockaddr url.
- Make all buffers slightly larger to prevent overflow.
- Make the stratum recv buffer larger than the recvsize.
- Userpass needs to be copied to user and pass earlier to allow stratum
authorisation to work with it.
- Store a sockaddr url of the stripped url used in determining sockaddr to not
confuse it with the stratum url and fix build warnings.
- Decrease the queued count with stratum work once it's staged as well.
- Allow the stratum retry to initiate and auth stratum in pool_alive to make
sure the stratum thread is started.
- Avoid duplicating pool->rpc_url and setting pool->stratum_url twice to itself.
- Detect if a getwork based pool has the X-Stratum header on startup, and if so,
switch to the stratum based pool.
- Comment update.
- Minor message change.
- Create a work item from a "clean" request from stratum allowing the new block
to be detected and the appropriate block change message to be given.
- Use statically allocated stratum strings in struct work to cope with the
inability to safely deallocate dynamically allocated ram.
- Use the current pool when deciding whether to reuse work from a stratum source
rather than the work's previous pool.
- Copy the stratum url to the rpc url to avoid none being set.
- Provide locking around stratum send operations to avoid races.
- Submit shares from stratum through the abstracted submit share function
detecting what message they belong to and showing the data from the associated
work, and then deleting it from the hash.
- Use a more robust mechanism to obtain a \n terminated string over a socket.
- Abstract out share submit as a function to be useable by stratum.
- Rename parse_stratum to parse_method as it is only for stratum messages that
contain methods.
- Display stratum as mechanism in status line when current pool is running it.
- Count each stratum notify as a getwork equivalent.
- Correct nonce submitted with share.
- Extranonce2 should be added before coinbase2.
- We should be hashing the binary coinbase, not the hex one.
- Fix endianness of nonce submitted for stratum.
- Check that stratum is already active in initiate_stratum to avoid
de-authorising ourselves by subscribing again.
- Begin implementing a hash database of submissions and attempt sending results.
- Copy parameters from stratum work required for share submission.
- Set lagging flag on first adding a pool to prevent pool slow warning at
startup.
- Fix work->target being a 32 byte binary in gen_stratum_work.
- Store and display stripped url in its own variable.
- Create machinery to divert work requests to stratum.
- Generate the work target in gen_stratum_work, setting default diff to 1 in
case it is not yet set.
- Generate work data, midstate and hash1 in gen_stratum_work.
- Generate header created from stratum structures in gen_stratum_work.
- Generate merkle root hash in gen_stratum_work.
- Generate the coinbase for generation of stratum based work.
- The number of transactions is variable so make merkle a variable length
dynamically allocated array and track how many there are for stratum.
- Rename nonce2 to n2size reflecting that it's a size variable and not the
actual nonce.
- Provide rudimentary support for stratum clean work command in the stratum
thread.
- Cope with pools being removed in the stratum thread.
- Use the pool sock value directly in the stratum thread in case it changes
after reconnecting.
- Create a stratum thread per pool that has stratum that monitors the socket and
serves received data.
- Check return value of stratum_parse.
- Complete authorisation in stratum.
- Implement stratum parsing of notify parameters and storing them in the pool
stratum work structure.
- Create helper functions for duplicating json strings to avoid keeping json
references in use.
- Append \n in the sock_send function instead of adding it when constructing
json in stratum.
- Don't keep any json references around with stratum structures.
- Create parse_stratum function that hands off stratum parameters to other
functions to manage pool stratum work struct variables. Implement mining
difficulty setting.
- Create helper functions for checking when a socket is ready to read on and
receive a single line at a time. Begin stratum authorisation process.
- Provide a helper function for reading a single \n terminated string from a
socket.
- Create a stratum work structure to store current work variables.
- Test specifically for stratum being active in pool_active.
- Detect stratum in common place when adding urls, and use a bool to tell us
when it's active.
- Remove unused add_pool_details5
- Fix warnings.
- Extract and store various parameters on stratum init confirming successful
mining notify.
- Use existing socket macros and close the socket on failure in init stratum.
- Initiate stratum and grab first json result.
- Get detailed addressinfo from the parsed URL for future raw socket usage when
possible. IPV4 only for now.
- Prepare for getaddrinfo call.
- Add data structures to pool struct for socket communications.
- Put all socket definitions in util.h to allow reusing by added socket
functions to be used in util.c.


BFGMiner Version 2.8.3 - October 18, 2012

- Update to libblkmaker 0.1.3
- Use explicit host to BE functions in scrypt code instead of hard coding
byteswap everywhere.
- Ease the checking on allocation of padbuffer8 in the hope it works partially
anyway on an apparently failed call.
- Round target difficulties down to be in keeping with the rounding of detected
share difficulties.
- String alignment to 4 byte boundaries and optimisations for bin<->hex
conversions.
- Fix GPU memory allocation size for scrypt
- Fix access violation with scrypt mining
- Bugfix: Only free rpc_req after using it, not before
- Bugfix: Increment work->pool->staged inside of mutex to avoid work being
freed (and staged decremented) before we dereference it
- Revert "No need for extra variable in hash_push.": The extra variable is
needed to avoid a rare dereference-after-free error.
- In opencl_free_work, make sure to still flush results in dynamic mode.
- Workaround: Debug log only after dec_queued, to make a free/use race more
rare
- Bugfix: Remove redundant \n in debug messages
- Bugfix: Free rpc_req in pool_active and longpolls
- README: Explicitly provide Ubuntu package name for libjansson-dev
- Bugfix: Include flash_led bool in cgpu_info for Icarus-but-not-BitForce
builds, since Cairnsmore uses it
- Only check work block id against pool's if the pool has a known block id
- Avoid clearing pool->block_id unless we really are changing pools


BFGMiner Version 2.8.2 - October 8, 2012

- Update to libblkmaker 0.1.2
- Bugfix: --temp-target no longer has a simple default (fixes build without
OpenCL support)
- Bugfix: icarus: Silence false epoll error
- Bugfix: icarus: Set firstrun for errors starting next job, so the current
one finishes properly
- Bugfix: icarus: Restore generic failure management for write errors
- Use strtod not strtol for bitforce temp backup.
- Cope with broken drivers returning nonsense values for bitforce temperatures.
- Minor warning fixes.
- Fix unused warnings on ming build.
- Fix sign warning in ocl.c
- fds need to be zeroed before set in modminer.
- Put scrypt warning on separate line to avoid 0 being shown on windows as
bufsize.
- Prevent corrupt values returned from the opencl code from trying to read
beyond the end of the buffer by masking the value to a max of 15.
- Icarus USB write failure is also a comms error
- api.c DEBUG message has no paramter
- Icarus catch more USB errors and close/reopen the port
- API-README update cgminer verison number
- hashmeter fix stats kh/s on 32bit windows
- cairnsmore: Increase maximum clock frequency to 210 Mhz
- icarus: Hashrate estimates really don't need the attention of a warning,
demote them to debug
- cairnsmore: Automatically "downgrade" default FPGA-per-device to 1 for
dynclock devices
- Bugfix: cairnsmore: Get autodetection of dynclock to work consistently
- cairnsmore: Adjust dynclock usage to react in proper time
- dynclock: Document function usage
- cairnsmore: Fix race on dynclock detection
- icarus: Detect attempts to send commands via work and neuter them
- cairnsmore: Glasswalker has a minimum multiplier of 20 :(
- cairnsmore: Detect frequency changing support despite hashing of commands
- modminer: Allow clocks down to 2 Mhz just in case
- Allow device drivers and users to properly change target temperatures for
non-GPUs
- Check that ncurses*-config installs actually work before deciding to use
them
- Bugfix: Fix multiple bugs in autogen.sh
- - Don't use readlink -f unneccesarily (it's not portable)
- - Always run autoreconf within the real source directory
- - Run configure from PWD, *not* the real source directory
- Bugfix: Include nonce in data buffer for debugging
- Bugfix: swap32* wants count of 32-bit blocks, not bytes
- Initial Cygwin port
- Revert "Remove needless roundl define.", since it is needed for Cygwin and
OpenWRT
- Bugfix: Deal with various compiler warnings
- modminer: Implement --temp-hysteresis logic
- Support for maximum frequency being below the default, eg when the maximum
is temporarily reduced to deal with temperature
- Bugfix: modminer: Reduce dynclock max frequency as needed to keep
temperature below cutoff
- Bugfix: Restore disabled label, needed to skip over hashrate calculations
(which mess up otherwise)
- Bugfix: bitforce: Count actual throttling as hardware errors
- icarus: Allow failure in case of reopen failure, now that the miner core
will retry on its own
- If a device dies, attempt to reinitialize it occasionally
- Bugfix: The REST flag is now preferred over WAIT, since the former might
trigger the latter
- Bugfix: modminer: Update temperature readings when disabled (fixes thermal
cutoff recovery)
- Bugfix: Move thermal cutoff to general watchdog code (fixes bitforce
recovery)
- Rename enable_device to register_device, since it only works for setting it
up at startup
- Move targettemp from ADL to cgpu_info, so all devices can readily use it
- Bugfix: "REST" flag had too much padding
- Bugfix: adl: Only warn and disable GPU due to thermal cutoff, if it's
actually enabled
- Bugfix: bitforce: Only warn and disable bitforce due to thermal cutoff, if
it's actually enabled


BFGMiner Version 2.8.1 - September 27, 2012

- Avoid strndup for Windows compatibility
- Bugfix: cairnsmore: Add missing compat.h include (for sleep)
- cairnsmore: Implement "identify" for supported firmware
- Adjust identify_device API to return a bool whether supported or not, for
runtime capability detection
- Bugfix: cairnsmore: Fix invalid share detection on LE
- Bugfix: icarus: Fix logging message to not assume "Icarus" always, and use
device driver name
- Bugfix: cairnsmore: Correct frequency scaling detection logic
- cairnsmore: When changing frequency, adjust Hs expectations accordingly
- cairnsmore: Detect availability of frequency scaling, and only enable it
when supported
- cairnsmore: Implement dynamic clocking support for Glasswalker's bitstream
- Update libblkmaker to 0.1.1
- Advertise BFGMiner in blocks found by default (without --coinbase-sig)
- RPC: Add "Coinbase-Sig" to config/setconfig
- New --coinbase-sig option to add arbitrary data to blocks you generate (GBT
only)
- opencl: Defer nonce validity checking to submit_nonce
- scrypt: Implement test_nonce2 and submit_nonce hw error check
- Bugfix: modminer: Convert nonce to native endian
- Interpret any attempts to submit a H-not-zero nonce as a hardware error
- make-release: Strip DLLs and EXE in Windows binary
- dynclock: Use consistent messages for frequency changes
- modminer: Port to dynclock
- dynclock: Split dynamic clocking algorithm out of Ztex driver
- Bugfix: When changing GPU memclock, adjust internal variable so it is
correctly saved to config file
- Bugfix: Re-probe longpoll header for each pool alive check, including
retries when a preferred protocol fails
- Bugfix: modminer: Bitstream binary filenames are *.bit
- modminer: Start frequency off at 200 Mhz
- Reorder libztex header include order to fix missing struct definition.
- Display share difficulty on log with a shortened hash display on submission.
- API stats add some pool getwork difficulty stats
- Ignore any pings pushed to the worker threads if the thread is still paused to
prevent it being enabled and disabled repeatedly.
- Test for sequential getwork failures on a pool that might actually be up but
failing to deliver work as we may end up hammering it repeatedly by mistake.
- reduce windows compile warnings
- util.c - bug - proxy - no data end condition
- API don't change 'Diff1 Shares' - backward compatability FTW
- miner.php highlighting correctly handling difficulty
- API - Add last share difficulty for devices and pool
- Store and report Accepted,Rejected,Stale difficulty in the summary and API
- WorkTime - display prevblock for scrypt
- api.c remove compile warnings
- Calculate work difficulty for each getwork and display with WorkTime debug
- FPGA - allow long or short device names in detect code + style police
- WorkTime - multiple nonce per work and identify the work source
- Optional WorkTime details with each Accepted/Rejected work item
- Icarus - ignore hardware errors in timing mode
- miner.php oops - mistype
- API pgaidentify - unsupported message should be a warning
- API/BFL identify a device - currently only BFL to flash the led
- BFL add throttle count to internal stats + API
- BFL: missing device id in log message
- Bugfix: ztex: Clear device_ztex before freeing it
- Bugfix: ztex: statline existence depends on whether the libztex structure
exists, not whether the cgpu is enabled
- Bugfix: README: Make usermod commands consistent, including important -a
option
- Bugfix: Address a couple of rare TQ leaks, and improve logging a bit
- Bugfix: Properly quote configure options


BFGMiner Version 2.8.0 - September 15, 2012

- Be specific about jansson version requirement
- Replace "Alive" in pool status with protocol in use (GBT or GWork)
- Remove copy of old jansson from source repository
- Honour block template expiry (BIP 23 Basic Pool Extensions "expires")
- Add --no-gbt option so getblocktemplate can be disabled if it causes
problems
- BIP 22 long polling
- Properly detect pool protocol
- Bugfix: Sort out work template refcounting by properly using work_free and
new workcpy
- Support for rolling extranonce in templates
- Initial libblkmaker integration, using a git submodule
- cairnsmore: There's no set hashrate like Icarus, so always use short timing
mode by default
- Bugfix: Include unistd.h needed for ssize_t type
- fpgautils: Don't try to scan serial at all anymore, if a device is claimed
- fpgautils: serial_claim function to politely ask other drivers not to try to
use device
- RPC: Update to work with Cairnsmore
- cairnsmore: Windows autodetect using FTDI library
- cairnsmore: Beginnings of new driver, with automatic upgrade from Icarus
detection
- icarus: Support disabling reopen quirk via --icarus-options
- proxy: Replace mess of encoding proxy into pool URI with a --pool-proxy
option, and use cURL's builtin proxy URI support
- save individual pool proxy settings to config
- API-README update for pools proxy info
- CURL support for individual proxy per pool and all proxy types
- Bugfix: Update current_block_id for fixed set_curblock
- miner.php by default don't display IP/Port numbers in error messages
- api.c all STATUS messages automatically escaped
- API add display of and setting queue,scantime,expiry
- README - FPGA device FAQ
- API add device diff1 work
- count device diff1 shares
- API-README update
- api.c Correct diff1 field name
- Bugfix: Sanitize block hash handling (including fixing on big endian)
- Bugfix: Print the (full) correct block hash when warning about work issued
against old blocks
- Bugfix: When comparing current block, only pay attention to the prevblock
header
- Allow mixing user+pass and userpass, so long as user+pass are balanced
before userpass options
- ztex: Include device serial number and FPGA number in cgpu name field
- ztex: Abstract common cgpu_info creation code
- ztex: Do thread initialization in thread_init rather than thread_prepare
- Bugfix: Tolerate working on old blocks when there is only one pool enabled
- Bugfix: ztex: Detect through fpgautils so -S noauto correctly inhibits
autodetection
- ztex: Workaround duplicate share submissions by doubling "backlog" size
- ztex: Use consistent device ids for logging
- Bugfix: ztex: Increment global hw_errors too
- Bugfix: free adhoc string elist element when removing it from list
- Bugfix: icarus: Initialize lret variable after work restart reentry
- Bugfix: ztex: Free lastnonce heap memory if backlog allocation fails
- icarus: Initialize epoll event structure in a way Valgrind is happier with
- Bugfix: Use strtok_r for parse_config since some options use strtok
themselves
- Import strtok_r from gnulib for Windows portability
- Bugfix: ztex: Don't try to destroy a mutex that was never created (single
FPGA Ztex devices)
- ztex: Clean up redundant dereferencing in ztex_shutdown
- API-README more debug parameter information
- API allow full debug settings control
- Sort the blocks database in reverse order, allowing us to remove the first
block without iterating over them. Output the block number to debug.
- Adjust opencl intensity when adjusting thread count to prevent it getting
pegged at a value below the minimum threads possible.
- miner.h max_hashes -> int64_t
- Keep the local block number in the blocks structs stored and sort them by
number to guarantee we delete the oldest when ageing the block struct entries.
- Use correct sdk version detection for SDK 2.7
- Bugfix: Align Ztex statline properly by removing redundant frequency
- make-release: Convert text files to DOS format for Windows ZIP


BFGMiner Version 2.7.5 - August 27, 2012

- Revert "Do a complete cgminer restart if the ATI Display Library fails, as
it does on windows after running for some time, when fanspeed reporting
fails."
- Stop special-casing worksize default to 256 for Cypress, since it incurs a 5
MH/s hit with stock config
- New "--scan-serial all" feature to probe all enumerated serial ports
- modminer: Revamp dynamic clocking algorithm per request from cablepair
- Test for lagging once more in queue_request to enable work to leak to backup
pools.
- There is no need to try to switch pools in select_pool since the current pool
is actually not affected by the choice of pool to get work from.
- Only clear the pool lagging flag if we're staging work faster than we're using
it.
- needed flag is currently always false in queue_request. Remove it for now.
- thr is always NULL going into queue_request now.
- Fix for non-ADL OpenCL device formatting issue


BFGMiner Version 2.7.4 - August 23, 2012

- Perform select_pool even when not lagging to allow it to switch back if needed
to the primary.
- Simplify macros in output kernels avoiding apparent loops and local variables.
- Carry the needed bool over the work command queue.
- Move the decision to queue further work upstream before threads are spawned
based on fine grained per-pool stats and increment the queued count immediately.
- Track queued and staged per pool once again for future use.
- OpenCL 1.0 does not have native atomic_add and extremely slow support with
atom_add so detect opencl1.0 and use a non-atomic workaround.
- Pools: add RollTime info to API 'stats' and 'Stats' button in miner.php


BFGMiner Version 2.7.3 - August 23, 2012

- Minimise the number of getwork threads we generate.
- Pick worksize 256 with Cypress if none is specified.
- Give warning with sdk2.7 and phatk as well.
- Whitelist sdk2.7 for diablo kernel as well.
- Only keep the last 6 blocks in the uthash database to keep memory usage
constant. Storing more is unhelpful anyway.
- Increase kernel versions signifying changed APIs.
- BFL flash - more FPGA-README
- Check we haven't staged work while waiting for a curl entry before proceeding.
- Use atomic ops to never miss a nonce on opencl kernels, including nonce==0,
also allowing us to make the output buffer smaller.
- Remove compile errors/warnings and document compile/usage in FPGA-README
- Ignore the submit_fail flag when deciding whether to recruit more curls or not
since we have upper bounds on how many curls can be recruited, this test is
redundant and can lead to problems.
- API-README update cgminer version number
- API-README fix groups P: example mistake
- API-README add COIN and other edits
- miner.php allow 'coin' is custom pages


BFGMiner Version 2.7.1 - August 22, 2012

- Update windows build instructions courtesy of sharky.
- Increase max curls to number of mining threads + queue * 2, accounting for up
and downstream comms.
- Queue enough requests to get started.
- There is no point trying to clone_work in get_work() any more since we clone
on every get_work_thread where possible.
- There is no point subtracting 1 from maxq in get_work_thread.
- miner.php allow page title to be defined in myminer.php
- Only set lagging flag once there are no staged work items.
- select_pool does not switch back to the primary once lagging is disabled.
- Increment total work counter under mutex lock.
- Increment the queued count after the curl is popped in case there's a delay
waiting on curls and we think we've queued work when in fact we're waiting on
curls.
- Do the dynamic timing in opencl code over a single pass through scanhash to
make sure we're only getting opencl times contributing to the measured
intervals.
- Increase curl reaping time to 5 minutes since comms between  curl requests can
be 2 mins apart with lots of rolltime.
- No need for extra variable in hash_push.
- Remove short options -r and -R to allow them to be reused and remove readme
entries for deprecated options.
- Deprecate the opt_fail_pause parameter, leaving a null placeholder for
existing configurations.
- Free work before retrying in get_work_thread.
- Don't pause after failed getwork, set lagging flag and reassess.
- We should not be pausing in trying to resubmit shares.
- Get rid of the extending fail pause on failed connects since we discard work
after a period.
- get_work always returns true so turn it into a void function.
- get_work never returns false so get rid of fail pause loop.
- Get rid of pause and retry from get_upstream_work so we only do it from one
place.
- Remove all cases where --retries aborts BFGMiner, making it for submission
retries only, where it makes sense.


BFGMiner Version 2.7.0 - August 21, 2012

- Implement a new pool strategy, BALANCE, which monitors work performed per pool
as a rolling average every 10 minutes to try and distribute work evenly over all
the pools. Do this by monitoring diff1 solutions to allow different difficulty
target pools to be treated equally, along with solo mining. Update the
documentation to describe this strategy and more accurately describe the
load-balance one.
- fpga serial I/O extra debug (disabled by default)
- Getwork fail was not being detected. Remove a vast amount of unused variables
and functions used in the old queue request mechanism and redefine the getfail
testing.
- Consider us lagging only once our queue is almost full and no staged work.
- Simplify the enough work algorithm dramatically.
- Only queue from backup pools once we have nothing staged.
- Don't keep queueing work indefinitely if we're in opt failover mode.
- Make sure we don't opt out of queueing more work if all the queued work is
from one pool.
- Set lagging flag if we're on the last of our staged items.
- Reinstate clone on grabbing work.
- Grab clones from hashlist wherever possible first.
- Cull all the early queue requests since we request every time work is popped
now.
- Keep track of staged rollable work item counts to speed up clone_available.
- Make expiry on should_roll to 2/3 time instead of share duration since some
hardware will have very fast share times.
- Check that we'll get 1 shares' worth of work time by rolling before saying we
should roll the work.
- Simplify all those total_secs usages by initialising it to 1 second.
- Overlap queued decrementing with staged incrementing.
- Artificially set the pool lagging flag on pool switch in failover only mode as
well.
- Artificially set the pool lagging flag on work restart to avoid messages about
slow pools after every longpoll.
- Factor in opt_queue value into enough work queued or staged.
- Roll work whenever we can on getwork.
- Queue requests for getwork regardless and test whether we should send for a
getwork from the getwork thread itself.
- Get rid of age_work().
- Don't try to get bitforce temperature if we're polling for a result to
minimise the chance of interleaved responses.
- Fix harmless unused warnings in scrypt.h.
- Check we are not lagging as well as there is enough work in getwork.


BFGMiner Version 2.6.5 - August 20, 2012

- API new command 'coin' with mining information
- Add message to share if it's a resubmit.
- Add virtual adl mapping for when none is specified on the command line to
not crash without a map specified.
- Fix ADL gpu-map not working when there are more ADL devices than openCL.
Patch supplied and tested by Nite69.
- bitforce: Initial import of Linux-only bitforce-firmware-flash utility
- Revert stale-on-arrival failsafe, since it ends up needing exceptions for
everything
- Bugfix: opencl: Declare opencl_dynamic_cleanup in header
- Even if we want to submit stale shares, give up if we have more submissions
waiting on threads (even before failing)
- Even if we want to submit stale shares, give up if they've failed and we
have more submissions waiting on threads
- opencl: Use timeBeginPeriod on Windows to ensure gettimeofday has sufficient
precision for dynamic intensity
- Bugfix: opencl: Move ADL fanspeed warning messages to a new thread to get
around summary-update deadlocking
- README: Note that user groups don't get updated until re-login
- Initialise cnt in libztex.c
- Don't try to start devices that don't support scrypt when scrypt mining.
- Repeating on timeout in ztex could make the code never return.
- Offset libusb reads/writes by length written as well in ztex.
- Cope with timeouts and partial reads in ztex code.
- If there are more devices than nDevs, don't iterate over them as they may
overwrite devices mapped below that with the mapping option.
- Fix README faq on bfl auto-detect.
- Set memory clock based on memdiff if present from with engine changes,
allowing it to parallel manual changes from the menu as well.
- api.c typo
- API allow display/change failover-only setting
- API-README corrections
- miner.php documentation (in API-README) v0.1
- Bugfix: opencl: Show blank device-info statline area if GPU doesn't have
ADL, to fix column alignment
- README: Document usage of 0 to indicate "leave at default" for comma-
delimited GPU options
- Correct API-README versions to match when BFGMiner included them
- API-README update changelog
- Minimise locking and unlocking when getting counts by reusing shared mutex
lock functions.
- Avoid getting more work if by the time the getwork thread is spawned we find
ourselves with enough work.
- The bitforce buffer is cleared and hw error count incremented on return from a
failed send_work already so no need to do it within the send_work function.
- Don't make mandatory work and its clones last forever.
- modminer: Log debug info for nonces found


BFGMiner Version 2.6.4 - August 11, 2012

- Bugfix: Define my_cancellable_getch in miner.h
- Escape " and \ when writing json config file
- miner.php allow a custom page section to select all fields with '*' - e.g. to
create a STATS section on a custom page
- miner.php optional single rig totals (on by default)
- Bugfix: Initialize submitting mutex
- Bugfix: bitforce: Allocate enough space for FTDI description pointers
- Queue one request for each staged request removed, keeping the staged
request count optimal at all times.
- Bugfix: Avoid cancelling threads while locks are held
- Set recognizable names on threads for debugging
- Bugfix: Don't keep making new get_work threads if all pools are dead
- Enable configuring submission thread limit with --submit-threads option
- Bugfix: Limit active submission threads to 0x40 so we don't overflow
- Bugfix: Properly handle switching to pools that aren't on the latest block,
and warn if a pool actively switches to an old block
- Log more details of reasons in stale_work debug messages
- Failsafe against stale-on-arrival work: disable the pool
- Bugfix: Debug message should show "Work stale due to work restart" when it's
not a share
- windows-build: Remove APP SDK section since it is no longer needed
- modminer: HACK: Let last_work handle the end of the work, and start the next
one immediately
- Bugfix: modminer: Remove erroneous "else" statement, to fix hashrate
reporting
- README: Document user group required for FPGAs on Gentoo and Ubuntu
- BFGMiner-specific README adjustments
- Bugfix: opencl: Ignore error getting device ids from platforms unless they
are explicitly chosen
- New --debuglog option to include debug info in stderr logfile even if not in
the console
- Bumped down debhelper compatibility reqs so that this will build on Lucid.
- Updated to match packaging changes.
- Switched to native packages so we don't have to muck around creating fake
upstream tarballs, and can easily generate minor versions for upload to
Launchpad.
- Removed accidentally included debugging line.
- Minor version bump again because of launchpad. Will sort this out for next
release.
- Updated to patch bitforce module issue on Debian/Ubuntu.
- Added local quilt config dir to ignore.
- modminer: Check nonce against previous work, in case of race
- Bugfix: Enable --kernel-path option if ModMiner or Ztex is enabled (even if
no OpenCL)
- Bugfix: Escape backslashes and double-quotes in strings that rightfully may
have them, when writing JSON config file
- Clean object (.o) and dependency (.d) files out of source tree
- Bugfix: bitforce: Don't count hashes that never happened due to throttling
- Bugfix: Deal with serial_open timeout maximum (25.5s)
- - fpgautils: Linux only supports uint8_t decisecond values for timeouts, so
use uint8_t for timeout value; this gets smart compilers to throw warnings
when overflowed in some cases
- - bitforce: Reduce serial timeout to 25 seconds (was 30) and increase job
long timeout to 25 seconds (was 15) to handle throttling gracefully
- modminer: Add debug info to API extra device stats
- modminer: Raise clock speed when there's only good nonces for a while
- modminer: Only print clock speed adjustments when they actually change
- modminer: Increase tolerance for bad nonces to 2%
- modminer: Reset bad-nonce ratio measurement when the clock speed changes
- Bugfix: bitforce: Include the correct device id in "garbled response" warning
- ADL: Add attribution and disclaimer to interfaces
- Cleaned out refs to AMD SDKs.
- Updated README about debian packaging, changelog with minor version bump to
work around Launchpad reqs.
- Updated changelog with Ubuntu release specific version, needed to build for
multiple releases. Also stripped out ADL SDK stuff in the build rules.
- Initial work to adjust debian packaging from cgminer. Should build correctly
now with pbuilder/pdebuild, and include docs.
- Adapt miner code to free ADL structures
- Import free ADL interfaces
- Include scrypt.h in Makefile.
- Fix windows bitforce build.
- Convert the serial autodetect functions to use int instead of char to
enumerate devices.
- Uglify windows autodetect code for BFL.
- There is no point zeroing temperature in BFL if we fail to get a response, and
we should register it as a HW error, suggesting throttling.
- Update SCRYPT README with information about HW errors.
- Use the scrypt CPU code to confirm results from OCL code, and mark failures as
HW errors, making it easier to tune scrypt parameters.
- We may as well leave one curl still available per pool instead of reaping the
last one.
- Display reaped debug message outside mutex lock to avoid recursive locking.
- api.c update API start message and include port number
- miner.php ignore arg when readonly
- miner.php allow pool inputs: delete, addpool, poolpriority
- bitforce: Reopen on communication error
- Bugfix: Calculate hw err percent for the affected FPGA only
- make-release: Adapt to new autogen by using NOCONFIGURE var


BFGMiner Version 2.6.3 - August 6, 2012

- modminer: Relax no-nonces downclocking condition to be more reasonable
- README: Update scrypt configure option
- README: Update configure options
- Bugfix: Display --disable-modminer in configure --help now that it is
enabled by default
- Add specific information when ADL detects error -10 saying the device is not
enabled.
- modminer: Shorten upload warning message to fit better
- modminer: Sending a "ping" first, to workaround bug in new firmware betas
- modminer: Include Hardware Errors and Valid Nonces in extra device status
- Bugfix: modminer: Calculate bad-nonce percentage based only on the same
FPGA's hardware errors, accurately
- modminer: Show bitstream upload progress in statline, and only report to log
every 10%
- modminer: Be more verbose about why the clock is getting reduced
- Document how Icarus golden nonce is handled by other FPGAs
- Rewrite should_run for sched, to properly handle one-shot schedules spanning
midnight
- Bugfix: Check list_empty in pop_curl_entry after condition wait
- Bugfix: Only add new pools to array after completing basic structure
initialization
- If __BFGMINER_SEGFAULT_ERRQUIT is set in the environment, segfault on
non-zero quit()s
- Check against NULL pointers getting into curlring
- modminer: Finish a process results run with a nonce poll, rather than sleep
- modminer: Workaround Windows driver failures
- Count likely throttling episodes on bitforce devices as hardware errors.
- Bugfix: bitforce: Increase serial read timeout to 30 seconds during actual
mining, to tolerate more throttling
- Style cleanups.
- Make pool_disabled the first in the enums == 0, fixing the pool enabled count
which compares if value is not enabled before enabling it.
- Correct writing of scrypt parameters to config file based on command line
parameters only.
- Add scrypt support while writing conf
- Use different variables for command line specified lookup gap and thread
concurrency to differentiate user defined versus auto chosen values.
- Queue a request on pool switch in case we have no work from the new pool yet.
- API remove unused warning in non-GPU compile
- api.c in linux allow to open a closed socket in TIME_WAIT
- Display failover only mode in pool menu and allow it to be toggled live.
- Reinstate check for system queueing lag when the current pool's queue is maxed
out, there is no staged work, and the work is needed now.
- Fix harmless warnings.
- Check the current staged and global queued as well before queueing requests.
Discard stales before ageing work in the watchdog thread. Queue requests after
discarding and ageing work in watchdog thread. Display accurate global queued in
curses output. Reuse variable in age_work().
- The queueing mechanism has become a complex state machine that is no longer
predictable. Rewrite it from scratch watching only current queues in flight and
staged work available on a pool by pool basis.
- Update debian package configs to v2.6.2
- Queue an extra request whenever staged work drops below mining thread count in
hash_pop.
- Bugfix: Initialize logwin to 1 line high temporarily, to avert PDCurses crash
- Enable FPGA support by default, as long as their dependencies are met
- Bugfix: modminer: Search for *ModMiner* in udev ID_MODEL
- make-release: build with --enable-scrypt
- miner.php support custom report section joins
- ICA default fpga_count to work_division if specified
- FPGA-README document new hidden --icarus-options
- ICA support 57600 baud rate, up to 8 FPGA and partial working FPGA boards
- Scrypt mining does not support block testing yet so don't try to print it.
- Clear the bitforce buffer whenever we get an unexpected result as it has
likely throttled and we are getting cached responses out of order, and use the
temperature monitoring as a kind of watchdog to flush unexpected results.
- It is not critical getting the temperature response in bitforce so don't
mandatorily wait on the mutex lock.
- Check there is a cutoff temp actually set in bitforce before using it as a cut
off value otherwise it may think it's set to zero degrees.
- We dropped the temporary stopping of curl recruiting on submit_fail by
mistake, reinstate it.
- Make threads report in either side of the scanhash function in case we miss
reporting in when restarting work.
- Add debugging output when work is found stale as to why.
- Print the 3 parameters that are passed to applog for a debug line in
bitforce.c
- Clear bitforce buffer on init as previously.
- Add some headroom to the number of curls available per pool to allow for
longpoll and sendwork curls.
- Show the correct base units on GPU summary.
- Bugfix: bitforce: 1 decisecond timeout is unreasonably short, give it a
second
- Bugfix: Don't try to log abandon time, since we aren't keeping track
reasonably
- Import uthash 1.9.6
- Bugfix: bitforce: Pause after send_work failures
- Fix comm error handling to not consider work restarts an error condition
- comm error bug fix
- Bugfix: No endian.h on Windows
- Remove unused mkinstalldirs
- Display scrypt as being built in as well.
- Fix build warning about KL_SCRYPT when built without scrypt support.
- News update.
- More scrypt intensity information.
- Minor readme updates.
- Update README with more build instructions.
- Remove the low hash count determinant of hardware being sick. A low hash rate
can be for poor network connectivity or scrypt mining, neither of which are due
to sick hardware.
- Style
- API-README poolpriority changes
- api.c verify poolpriority parameters before changing pools
- api.c poolpriority changes
- Implement shared swap32(yes|tole|tobe) function to handle endian flipping
32-bit chunks in blocks
- Use correct macros for endian handling code


BFGMiner Version 2.6.1 - July 29, 2012

- Autoselect --scrypt iff all pools send scrypt work
- Adapt SCRYPT-README to BFGMiner (directing Bitcoin donations the correct
direction to reach Con)
- Remove mentions of Litecoin specifically
- Bugfix: Fix build without OpenCL but with scrypt
- make-release: Add SCRYPT-README
- Bump version 2.6.0, adding SCRYPT README to makefile.
- Smarter autogen.sh script.
- Sleeping on intensity decrease is broken, remove it.
- Sleep only the extra amount of time we overran the dynamic interval in dynamic
mode.
- Add scrypt documentation in the form of a separate readme.
- Fix build error without scrypt enabled.
- Limit thread concurrency for scrypt to 5xshaders if shaders is specified.
- Simplify repeated use of gpus[gpu]. in ocl.c
- Find the nearest power of 2 maximum alloc size for the scrypt buffer that can
successfully be allocated and is large enough to accomodate the thread
concurrency chosen, thus mapping it to an intensity.
- Don't make opt_scrypt mandatory blocking with opencl code.
- Update kernel versions reflecting changes in the API.
- Make the thread concurrency and lookup gap options hidden on the command line
and autotune parameters with a newly parsed --shaders option.
- Fix target testing with scrypt kernel as it would have been missing shares
below target.
- Always create the largest possible padbuffer for scrypt kernels even if not
needed for thread_concurrency, giving us some headroom for intensity levels.
- Use the detected maximum allocable memory on a GPU to determine the optimal
scrypt settings when lookup_gap and thread_concurrency parameters are not given.
- Check the maximum allocable memory size per opencl device.
- Add debugging output if buffer allocation fails for scrypt and round up
bufsize to a multiple of 256.
- Nonce testing for btc got screwed up, leading to no accepted shares. Fix it.
- Display size of scrypt buffer used in debug.
- Allow intensities up to 20 if scrypt is compiled in.
- Add name to scrypt kernel copyright.
- Allow lookup gap and thread concurrency to be passed per device and store
details in kernel binary filename.
- Ignore negative intensities for scrypt.
- Change the scale of intensity for scrypt kernel and fix a build warning.
- Correct target value passed to scrypt kernel.
- Use 256 output slots for kernels to allow 1 for each worksize.
- Test the target in the actual scrypt kernel itself saving further
calculations.
- Reinstate GPU only opencl device detection.
- Decrease lookup gap to 1. Does not seem to help in any way being 2.
- Fix build.
- Make pad0 and pad1 local variable in scrypt kernel.
- Constify input variable in scrypt kernel.
- Send correct values to scrypt kernel to get it finally working.
- Create command queue before compiling program in opencl.
- Fix external scrypt algo missing.
- Limit scrypt to 1 vector.
- Handle KL_SCRYPT in config write.
- Get rid of stuff.
- Don't enqueuewrite buffer at all for pad8 and pass work details around for
scrypt in dev_blk.
- Set the correct data for cldata and prepare for pad8 fixes.
- Get rid of spaces in arrays in scrypt kernel.
- Start with smaller amount of hashes in cpu mining to enable scrypt to return
today sometime.
- Free the scratchbuf memory allocated in scrypt and don't check if CPUs are
sick since they can't be. Prepare for khash hash rates in display.
- Add cpumining capability for scrypt.
- Set scrypt settings and buffer size in ocl.c code to be future modifiable.
- Cope with when we cannot set intensity low enough to meet dynamic interval by
inducing a forced sleep.
- Make dynamic and scrypt opencl calls blocking.
- Fix nonce submission code for scrypt.
- Make sure goffset is set for scrypt and drop padbuffer8 to something
manageable for now.
- Set up buffer8 for scrypt.
- Build fix for opt scrypt.
- Don't check postcalc nonce with sha256 in scrypt.
- Don't test nonce with sha and various fixes for scrypt.
- Make scrypt buffers and midstate compatible.
- Use specific output array entries in scrypt kernel.
- Provide initial support for the scrypt kernel to compile with and mine scrypt
with the --scrypt option.
- Enable completely compiling scrypt out.
- Begin import of scrypt opencl kernel from reaper.


BFGMiner Version 2.5.3 - July 29, 2012

- Bugfix: Add zlib1.dll to Win32 release archive
- Bugfix: SICK low-hashrate is now determined by being under 1/3 the runtime
average hashrate
- Bugfix: cpu_set_t is never #defined, so use CPU_ZERO which is a macro


BFGMiner Version 2.5.2 - July 29, 2012

- Limit total number of curls recruited per pool to the number of mining threads
to prevent blasting the network when we only have one pool to talk to.
- Bugfix: Skip writing configuration of range-limited int options with negative
values
- Bugfix: Correctly attempt to load ~/.bfgminer/bfgminer.conf or
~/.cgminer/cgminer.conf as defaults
- Send X-Minimum-Wait header on longpolls, to explicitly inform pools we will
handle a response with no delay
- bitforce: Abandon (only) stale searches for work restarts
- Keep a counter of enabled pools and use that instead of iterating over the
pool list. Use that value to ensure we don't set the last remaining active pool
to the rejecting state.
- bitforce: Skip out of sending work if work restart requested
- RPC: Writeup on poolpriority command usage
- Bugfix: API: Report errors from poolpriority command
- RPC: New "poolpriority" command to set the order of pool priorities
- strtok_ts: Thread-safe strtok that work on POSIX or Windows
- Bugfix: Supress "caught up" event when first switching to a pool
- Announce and restart work immediately when current pool has caught up to the
current block
- Bugfix: Don't consider work stale due to other pools' longpolls, if
--failover-only is active
- Refactor stale_work function to only flag actual stale shares
- stale_work: Don't factor getwork delay into expiry for shares (only for work
itself)
- Bugfix: Use pool number rather than numeric pointer to strict pool, in block
found notice
- Accept JSON Numbers in config file parameters
- Improve readability of OPT_HASARG in parse_config
- Allow JSON false as a valid value for strictly boolean options
- Include scan-serial in example configuration file
- fpgautils: add support for 57.6 kBd serial
- miner.php add a socket RCV timeout for if cgminer is hung and the API thread
is still running
- BFL force all code to timeout to avoid hanging
- Initialise mdplatform.
- Find the gpu platform with the most devices and use that if no platform option
is passed.
- Bugfix: It is not a hardware error if nonces returned from modminer don't
meet the pool target
- bitforce & icarus: Log detection failures at debug log level, so we don't
confuse users who have different devices (which is why these drivers are
failing detection!)
- Show "WAIT" (LIFE_WAIT status) if a cgpu is idle waiting for work (pool
slow/dead)
- Instead of quitting on failing N retries, just discard the share
- Bugfix: Don't discard stale shares after submission failure, if user or pool
wants stales submitted
- Bugfix: Record discard-during-retry shares in the sharelog
- Bugfix: Only show Algorithm in RPC summary if CPU mining is actually active
- OpenCL: Remove intensity from statline, since it overflowed
- Move "Q" (requested getworks) to second status line as "GW" to balance out
better
- Bugfix: Use a mutex to control non-curses output
- Simplify code to a single vprintf path for curses-less printing
- Move opt_quiet check to my_log_curses, so it works for curses-less builds
- Use log_generic for vapplog to cut down on code duplication
- Bugfix: Copy argv[0] given to dirname()
- Find the gpu platform with the most devices and use that if no platform
option is passed.
- Allow more platforms to be probed if first does not return GPUs.
- Detach pthread from within the api thread in case it is terminated due to not
being instantiated before pthread_cancel is called from main, leading to a
segfault.
- Debug output per thread hashrate is out by a factor of 1000.
- Don't check if CPUs are sick since they can't be.
- Calculate midstate in separate function and remove likely/unlikely macros
since they're dependent on pools, not code design.
- Display in debug mode when we're making the midstate locally.
- Bugfix: Document --no-adl and --gpu-platform
- Bugfix: Remove redundant documentation of --auto-fan and --auto-gpu (they
are in GPU-specific options)
- CPU mining may not be included in binaries, but it's not deprecated for
BFGMiner either
- Bugfix: Restore case-insensitivity to input
- Scroll the device list with up/down arrow keys, if it is overflowed
- Use select statement to handle input
- Bugfix: Actually check that the device fits in the individual summary window
before trying to print it
- Bugfix: Fix build without curses but with OpenCL
- Bugfix: Don't show a Temperature key if it isn't known
- BFGMiner-specific NEWS fix


BFGMiner Version 2.5.1 - July 13, 2012

- Replace CPU Algo in header with runtime
- Bugfix: Calculate diff-1 utility to fix utility-hashrate on pools with
diff!=1
- Add utility hashrate to curses display
- Show units in kh, Gh, Th, etc as needed to use at most 3 integer digits
- Use FTD2XX.DLL on Windows to autodetect BitFORCE SHA256 devices
- bitforce_get_result returns -1 on error now.
- Check return value of read in BFgets
- Bugfix: modminer: Count hashes done before work restart
- Bugfix: modminer: Adapt "get nonce" error condition to new scanhash=>-1
error API
- Bugfix: Make our Windows nanosleep/sleep replacements standards-compliant
(which fixes nmsleep) and include compat.h for bitforce (for sleep)
- miner.php fix rig # when miners fail
- Fix whitespace mangling.
- bitforce: Use "full work" vs "nonce range" for kernel name
- Abbrv. correction
- Remove superfluous ave_wait
- Put kname change for broken nonce-range back in
- Add average wait time to api stats
- Revert "Merge branch 'ave_time' of https://github.com/pshep/cgminer.git"
- Add average return time to api stats
- Missed one nonce-range disabling.
- Change timeouts to time-vals for accuracy.
- More BFL tweaks. Add delay between closing and reopening port. Remove buffer
clear in re-init Add kernel type (mini-rig or single)
- Revert "Change BFL driver thread initialising to a constant 100ms delay
between devices instead of a random arrangement."
- Only try to shut down work cleanly if we've successfully connected and started
mining.
- Fix spelling.
- modminer: Firmware returns 0xffffff00 immediately if we set clockspeed too
high
- Bugfix: modminer: Actually count good shares
- Bugfix: Adapt OpenCL scanhash errors to driver API change (errors are now -1,
not 0)
- Remove bitforce_thread_init The delay thing does nothing useful... when long
poll comes around, all threads restart at the same time anyway.
- fix API support for big endian machines
- Bugfix: Use const struct device_api* for mt_disable
- modminer: Show progress of bitstream upload
- Bugfix: Don't declare devices SICK if they're just busy initializing
- Bugfix: Calculate nsec in nmsleep correctly
- miner.php allow rig names in number buttons
- Change BFL driver thread initialising to a constant 100ms delay between
devices instead of a random arrangement.
- Spelling typo.
- Time opencl work from start of queueing a kernel till it's flushed when
calculating dynamic intensity.
- Modify te scanhash API to use an int64_t and return -1 on error, allowing zero
to be a valid return value.
- Check for work restart after the hashmeter is invoked for we lose the hashes
otherwise contributed in the count.
- Remove disabled: label from mining thread function, using a separate
mt_disable function.
- Style changes.
- Cope with signals interrupting the nanosleep of nmsleep.
- Use standard cfsetispeed/cfsetospeed to set baud rate on *nix
- miner.php split() flagged deprecated in PHP 5.3.0
- Bugfix: Use nmsleep instead of restart_wait, so we always wait the full time
- Make long timeout 10seconds on bitforce for when usleep or nanosleep just
can't be accurate...


BFGMiner Version 2.5.0 - July 7, 2012

- Fix BitFORCE driver to not silenty discard valid shares (bug introduced by
CGMiner merges)
- Fix --benchmark not working since the dynamic addition of pools and pool
stats.
- Make disabling BFL nonce range support a warning since it has to be explicitly
enabled on the command line now.
- miner.php allow renaming table headers
- Make bitforce nonce range support a command line option --bfl-range since
enabling it decrease hashrate by 1%.
- Add sanity checking to make sure we don't make sleep_ms less than 0 in
bitforce.
- The fastest minirig devices need a significantly smaller starting sleep time.
- Use a much shorter initial sleep time to account for faster devices and nonce
range working, and increase it if nonce range fails to work.
- Use nmsleep instead of usleep in bitforce.
- Provide a ms based sleep function that uses nanosleep to avoid the inaccuracy
of usleep on SMP systems.
- delay_time_ms is always set so need not be initialised in bitforce.
- Increase bitforce timeout to 10 seconds.
- Add more hysteresis and poll ~5 times to allow for timer delays in bitforce
devices.
- miner.php allow alternating line colours (off by default)
- Display the actual duration of wait when it is greater than the cutoff.
- Set nonce to maximum once we determine nonce range support is broken.
- Initial wait time is always known so no need to zero it beforehand in
bitforce.
- No point counting wait time until the work is actually sent to bitforce
devices.
- Use string comparison functions instead of explicit comparisons.
- Account for wait_ms time when nonce_range is in use on BFL.
- Split nonces up into 1/5 chunks when nonce range is supported.
- limit clear buffer iterations.
- Ad fd check to clear buffer.
- miner.php remove incorrect 'DATE' error message
- miner.php allow summary header in custom pages
- Disable nonce range support in BFL when broken support is detected.
- Restart_wait is only called with a ms value so incorporate that into the
function.
- Only try to adjust dev width when curses is built in.
- miner.php define custom sum fields as a simple array
- Fix off-by-one error in nonce increment in bfl.
- Use BE when setting nonce in bitforce nonce range work.
- Enable nonce range in the normal init sequence for bfl.
- Queue extra work at 2/3 differently depending on whether we're using nonce
range or not.
- Initially enable support for nonce range support on bfl, splitting nonces up
into 3/4 size and only disable it if it fails on work submit.
- Attempt to detect nonce range support in BFL by sending work requring its
support.
- Limit retrying on busy for up to BITFORCE_TIMEOUT_MS
- Attempt to initialise while bitforce device returns BUSY.
- Extend length of string that can be passed to BFL devices.
- Fix signedness warning.
- Adjust device width column to be consistent.
- Use cgpu-> not gpus[] in watchdog thread.
- Add api stats (sleep time)
- Timing tweaks Added long and short timeouts, short for detecting throttling,
long to give up totally. Reset sleep time when device re-initialised Still check
results after timeout Back up a larger time if result on first poll.
- Add API Notify counter 'Comms Error'
- Style police on api.c
- Do all logging outside of the bitforce mutex locking to avoid deadlocks.
- Remove applog call from bfwrite to prevent grabbing nested mutexes.
- Bitforce style changes.
- Minor style changes.
- Remove needless roundl define.
- Made JSON error message verbose.
- Fine-tune timing adjustment. Also remove old work_restart timing.
- Check for gpu return times of >= 0, not just 0, to fix intensity dropping to
-10.
- Restart is zeroed in the mining thread so no need to do it inside the bitforce
code.
- More improvements to comms. BFL return nothing when throttling, so should not
be considered an error. Instead repeat with a longer delay.
- Polling every 10ms there's not much point checking the pthread_cond_timedwait
as it just adds overhead. Simply check the value of work_restart in the bfl main
polling loop.
- Use a pthread conditional that is broadcast whenever work restarts are
required. Create a generic wait function waiting a specified time on that
conditional that returns if the condition is met or a specified time passed to
it has elapsed. Use this to do smarter polling in bitforce to abort work, queue
more work, and check for results to minimise time spent working needlessly.
- Add busy time to wait time.
- api.c put version up to 1.14
- Add tiny delay after writing to BFL Change BFL errors to something more human
readable Send work busy re-tries after 10ms delay
- Fix race condition in thread creation that could under some conditions crash
BFGMiner at startup


BFGMiner Version 2.4.4 - July 1, 2012

- Fix builds on non gnu platforms.
- api.c ensure old mode is always available when not using --api-groups + quit()
on param errors
- Implement rudimentary X-Mining-Hashrate support.
- Detect large swings in temperature when below the target temperature range and
change fan by amounts dependant on the value of tdiff.
- Adjust the fanspeed by the magnitude of the temperature difference when in the
optimal range.
- Revert "Restarting cgminer from within after ADL has been corrupted only leads
to a crash. Display a warning only and disable fanspeed monitoring."
- api.c fix json already closed
- implement and document API option --api-groups
- Put upper bounds to under 2 hours that work can be rolled into the future for
bitcoind will deem it invalid beyond that.
- define API option --api-groups
- api.c allow unwell devices to be enabled so they can be cured
- miner.php - fix/enable autorefresh for custom pages
- miner.php allow custom summary pages - new 'Mobile' summary
- Work around pools that advertise very low expire= time inappropriately as this
leads to many false positives for stale shares detected.
- Only show ztex board count if any exist.
- There is no need for work to be a union in struct workio_cmd
- fpgautils.c include a debug message for all unknown open errors
- Don't keep rolling work right up to the expire= cut off. Use 2/3 of the time
between the scantime and the expiry as cutoff for reusing work.
- Log a specific error when serial opens fail due to lack of user permissions
- Increase GPU timing resolution to microsecond and add sanity check to ensure
times are positive.
- Opencl code may start executing before the clfinish order is given to it so
get the start timing used for dynamic intensity from before the kernel is
queued.
- fpgautils.c - set BAUD rate according to termio spec
- fpgautils.c - linux ordering back to the correct way
- miner.php remove unneeded '.'s
- miner.php add auto refresh options
- miner.php add 'restart' next to 'quit'
- miner.php make fontname/size configurable with myminer.php
- Make the pools array a dynamically allocated array to allow unlimited pools to
be added.
- Make the devices array a dynamically allocated array of pointers to allow
unlimited devices.
- Dynamic intensity for GPUs should be calculated on a per device basis. Clean
up the code to only calculate it if required as well.
- Bugfix: Provide alternative to JSON_ENCODE_ANY for Jansson 1.x
- Use a queueing bool set under control_lock to prevent multiple calls to
queue_request racing.
- Use the work clone flag to determine if we should subtract it from the total
queued variable and provide a subtract queued function to prevent looping over
locked code.
- Don't decrement staged extras count from longpoll work.
- Count longpoll's contribution to the queue.
- Increase queued count before pushing message.
- Test we have enough work queued for pools with and without rolltime
capability.
- As work is sorted by age, we can discard the oldest work at regular intervals
to keep only 1 of the newest work items per mining thread.
- Roll work again after duplicating it to prevent duplicates on return to the
clone function.
- Abstract out work cloning and clone $mining_threads copies whenever a rollable
work item is found and return a clone instead.
- api.c display Pool Av in json
- Take into account average getwork delay as a marker of pool communications
when considering work stale.
- Work out a rolling average getwork delay stored in pool_stats.
- Getwork delay in stats should include retries for each getwork call.
- Walk through the thread list instead of searching for them when disabling
threads for dynamic mode.
- Extend nrolltime to support the expiry= parameter. Do this by turning the
rolltime bool into an integer set to the expiry time. If the pool supports
rolltime but not expiry= then set the expiry time to the standard scantime.
- When disabling fanspeed monitoring on adl failure, remove any twin GPU
association. This could have been leading to hangs on machines with dual GPU
cards when ADL failed.
- modminer: Don't delay 2nd+ FPGAs during work restart
- Disable OpenCL code when not available.
- Fix openwrt crashing on regeneratehash() by making check_solve a noop.
- Fix sign warning.
- Bugfix: icarus: properly store/restore info and work end times across longpoll
restarts
- Enable modminer for release builds


BFGMiner Version 2.4.3 - June 14, 2012

- Change device API "name" to reflect driver name abbreviation instead of device type name
- miner.php allow a separate user settings file
- modminer: Implement extended device stats to expose each Board to the RPC API
- Bugfix: Use new cgpu->thr for longpoll waking
- bitforce: Remove 4.5s delay before polling starts, since MiniRig finishes sooner
- FPGA - allow device detect override without an open failure
- Bugfix: Missing printf value in merge from cgminer
- Ensure C compiler is in C99 mode
- Add CPU core count detection for BSD/Mac
- Set CPU mining idle priority on Windows
- can_roll and should_roll should have no bearing on the cycle period within the
miner_thread so remove it.
- Check for strategy being changed to load balance when enabling LPs.
- Check that all threads on the device that called get_work are waiting on
getwork before considering the pool lagging.
- Iterate over each thread belonging to each device in the hashmeter instead of
searching for them now that they're a list.
- When using rotate pool strategy, ensure we only select from alive enabled
pools.
- Start longpoll from every pool when load balance strategy is in use.
- Add mandatory and block fields to the work struct. Flag any shares that are
detected as blocks as mandatory to submit, along with longpoll work from a
previously rejecting pool.
- Consider the fan optimal if fanspeed is dropping but within the optimal speed
window.
- Fix typo in some API messages (succeess/success)
- api.c MMQ stat bugs
- Bugfix: Fix warnings when built without libudev support
- Bugfix: slay a variety of warnings
- Bugfix: modminer: Fix unsigned/signed comparison and similar warnings
- API add ModMinerQuad support
- Bugfix: Honour forceauto parameter in serial_detect functions
- modminer: Temperature sensor improvements
- modminer: Make log messages more consistent in format
- Only adjust GPU speed up if the fanspeed is within the normal fanrange and
hasn't been turned to maximum speed under overheat conditions.
- ModMiner use valid .name
- New driver: BTCFPGA ModMiner
- Abstract generally useful FPGA code into fpgautils.c
- API add stats for pool getworks
- miner.php option to hide specific fields from the display
- miner.php add version numbers to the summary page
- Update debian configs to v2.4.2
- Add API and FPGA READMEs into Makefile to be included in source distribution.
- Icarus - fix unit64_t printf warnings


BFGMiner Version 2.4.2 - June 2, 2012

- Use epoll to immediately interrupt Icarus with new work on longpolls (Linux)
- API.class compiled with Java SE 6.0_03 - works with Win7x64
- miner.php highlight devs too slow finding shares (possibly failing)
- API update version to V1.11 and document changes
- API save default config file if none specified
- api.c save success incorrectly returns error
- api.c replace BUFSIZ (linux/windows have different values)
- Move RPC API content out of README to API-README
- Open a longpoll connection if a pool is in the REJECTING state as it's the
only way to re-enable it automatically.
- Use only one longpoll as much as possible by using a pthread conditional
broadcast that each longpoll thread waits on and checks if it's the current pool
before
- If shares are known stale, don't use them to decide to disable a pool for
sequential rejects.
- Restarting cgminer from within after ADL has been corrupted only leads to a
crash. Display a warning only and disable fanspeed monitoring.
- Icarus: fix abort calculation/allow user specified abort
- Icarus: make --icarus-timing hidden and document it in FPGA-README
- Icarus: high accuracy timing and other bitstream speed support
- add-MIPSEB-to-icarus-for-BIG_ENDIAN
- work_decode only needs swab32 on midstate under BIG ENDIAN
- add compile command to api-example.c
- save config bugfix: writing an extra ',' when no gpus
- Add dpkg-source commits


BFGMiner Version 2.4.1 - May 6, 2012

- Icarus: Calibrate hashrate yet even more accurately
- In the unlikely event of finding a block, display the block solved count with
the pool it came from for auditing.
- Display the device summary on exit even if a device has been disabled.
- Use correct pool enabled enums in api.c.
- Import Debian packaging configs
- Ensure we test for a pool recovering from idle so long as it's not set to
disabled.
- Fix pool number display.
- Give BFGMiner -T message only if curses is in use.
- Reinit_adl is no longer used.
- API 'stats' allow devices to add their own stats also for testing/debug
- API add getwork stats to BFGMiner - accesable from API 'stats'
- Don't initialise variables to zero when in global scope since they're already
initialised.
- Get rid of unitialised variable warning when it's false.
- Move a pool to POOL_REJECTING to be disabled only after 3 minutes of
continuous rejected shares.
- Some tweaks to reporting and logging.
- API support new pool status
- Add a temporarily disabled state for enabled pools called POOL_REJECTING and
use the work from each longpoll to help determine when a rejecting pool has
started working again. Switch pools based on the multipool strategy once a pool
is re-enabled.
- Removing extra debug
- Fix the benchmark feature by bypassing the new networking code.
- Reset sequential reject counter after a pool is disabled for when it is
re-enabled.
- ztex updateFreq was always reporting on fpga 0
- Trying harder to get 1.15y working
- Specifying threads on multi fpga boards extra cgpu
- Missing the add cgpu per extra fpga on 1.15y boards
- API add last share time to each pool
- Don't try to reap curls if benchmarking is enabled.


BFGMiner Version 2.4.0 - May 3, 2012

- Only show longpoll warning once when it has failed.
- Convert hashes to an unsigned long long as well.
- Detect pools that have issues represented by endless rejected shares and
disable them, with a parameter to optionally disable this feature.
- Bugfix: Use a 64-bit type for hashes_done (miner_thread) since it can overflow
32-bit on some FPGAs
- Implement an older header fix for a label existing before the pthread_cleanup
macro.
- Limit the number of curls we recruit on communication failures and with
delaynet enabled to 5 by maintaining a per-pool curl count, and using a pthread
conditional that wakes up when one is returned to the ring buffer.
- Generalise add_pool() functions since they're repeated in add_pool_details.
- Bugfix: Return failure, rather than quit, if BFwrite fails
- Disable failing devices such that the user can attempt to re-enable them
- Bugfix: thread_shutdown shouldn't try to free the device, since it's needed
afterward
- API bool's and 1TBS fixes
- Icarus - minimise code delays and name timer variables
- api.c V1.9 add 'restart' + redesign 'quit' so thread exits cleanly
- api.c bug - remove extra ']'s in notify command
- Increase pool watch interval to 30 seconds.
- Reap curls that are unused for over a minute. This allows connections to be
closed, thereby allowing the number of curl handles to always be the minimum
necessary to not delay networking.
- Use the ringbuffer of curls from the same pool for submit as well as getwork
threads. Since the curl handles were already connected to the same pool and are
immediately available, share submission will not be delayed by getworks.
- Implement a scaleable networking framework designed to cope with any sized
network requirements, yet minimise the number of connections being reopened. Do
this by create a ring buffer linked list of curl handles to be used by getwork,
recruiting extra handles when none is immediately available.
- There is no need for the submit and getwork curls to be tied to the pool
struct.
- Do not recruit extra connection threads if there have been connection errors
to the pool in question.
- We should not retry submitting shares indefinitely or we may end up with a
huge backlog during network outages, so discard stale shares if we failed to
submit them and they've become stale in the interim.


BFGMiner Version 2.3.6 - April 29, 2012

- Shorten stale share messages slightly.
- Protect the freeing of current_hash under mutex_lock to prevent racing on it
when set_curblock is hit concurrently.
- Change default behaviour to submitting stale, removing the --submit-stale
option and adding a --no-submit-stale option.
- Make sure to start the getwork and submit threads when a pool is added on the
fly. This fixes a crash when a pool is added to running BFGMiner and then
switched to.
- Faster hardware can easily outstrip the speed we can get work and submit
shares when using only one connection per pool.
- Test the queued list to see if any get/submits are already queued and if they
are, start recruiting extra connections by generating new threads.
- This allows us to reuse network connections at low loads but recuit new open
connections as they're needed, so that BFGMiner can scale to hardware of any
size.


BFGMiner Version 2.3.5 - April 28, 2012

- Restarting BFGMiner leads to a socket that can't be bound for 60 seconds, so
increase the interval that API binding waits to 30 seconds to minimise the
number of times it will retry, spamming the logs.
- Give a longpoll message for any longpoll that detects a block change, primary
or backup, and also display which pool it was.
- Decrease utility display to one decimal place.
- Small cosmetic output alignment.
- Add pool number to stale share message.
- Add space to log output now that there is more screen real estate available.
- Indentation clean up.
- Remove thread id display from rejected shares as well.
- Merge pull request #185 from Diapolo/diakgcn
- add goffset support for diakgcn with -v 1 and update kernel version
- Set have_longpoll to true when there is at least one pool with longpoll.
- Don't display the thread ID since it adds no useful information over the
device number.
- Don't display the first 8 bytes of a share since they will always be zero at
>= 1 difficulty.
- work->longpoll is reset across test_work_current so we need to recheck what
pool it belongs to.
- Use longpolls from backup pools with failover-only enabled just to check for
block changes, but don't use them as work.
- Start longpoll only after we have tried to extract the longpoll URL.
- Check for submitold flag on resubmit of shares, and give different message for
stale shares on retry.
- Check for submitold before submitstale.
- Don't force fresh curl connections on anything but longpoll threads.
- Create one longpoll thread per pool, using backup pools for those pools that
don't have longpoll.
- Use the work created from the longpoll return only if we don't have
failover-enabled, and only flag the work as a longpoll if it is the current
pool.
- This will work around the problem of trying to restart the single longpoll
thread on pool changes that was leading to race conditions.
- It will also have less work restarts from the multiple longpolls received from
different pools.
- Remove the invalid entries from the example configuration file.
- Add support for latest ATI SDK on windows.
- Export missing function from libztex.
- miner.php change socktimeoutsec = 10 (it only waits once)
- Bugfix: Make initial_args a const char** to satisfy exec argument type warning
(on Windows only)
- miner.php add a timeout so you don't sit and wait ... forever
- Create discrete persistent submit and get work threads per pool, thus allowing
all submitworks belonging to the same pool to reuse the same curl handle, and
all getworks to reuse their own handle.
- Use separate handles for submission to not make getwork potentially delay
share submission which is time critical.
- This will allow much more reusing of persistent connections instead of opening
new ones which can flood routers.
- This mandated a rework of the extra longpoll support (for when pools are
switched) and this is managed by restarting longpoll cleanly and waiting for a
thread join.
- miner.php only show the current date header once
- miner.php also add current time like single rig page
- miner.php display rig 'when' table at top of the multi-rig summary page
- README - add some Ztex details
- api.c include zTex in the FPGA support list
- api.c ensure 'devs' shows PGA's when only PGA code is compiled
- miner.c sharelog code consistency and compile warning fix
- README correct API version number
- README spelling error
- api.c combine all pairs of sprintfs()
- api.c uncomment and use BLANK (and COMMA)
- Code style cleanup
- Annotating frequency changes with the changed from value
- README clarification of 'notify' command
- README update for API RPC 'devdetails'
- api.c 'devdetails' list static details of devices
- Using less heap space as my TP-Link seems to not handle this much


BFGMiner Version 2.3.4 - April 26, 2012

- New maintainership of code with modular FPGA/GPU focus, under BFGMiner name
- Complete working support for cross-compiling Windows builds on Linux.
- Fix usage of low --scan-time settings so it doesn't busy-loop
- JSON API: Add new 'devdetail' command to get fixed device information
- JSON API: Implement driver abstraction for extra device status
- Icarus: Use epoll to wait for serial port input properly, when available
- Icarus: Workaround buggy USB-UART that causes Icarus to stop mining rarely
- Icarus: Estimate mining hashrate correctly, calibrated from real-world data
- Icarus: Parallelize work setup with Icarus hash search improving performance
- Icarus: More reliable detection and runtime
- OpenCL: Move GPU-specific data fetching from JSON API to OpenCL driver
- OpenCL: Dynamically load OpenCL library, to be more vendor-independent and
allow use without actually having OpenCL (i.e. FPGA-only rigs).


CGMiner Version 2.3.4 - April 25, 2012

- Extensively document the cause of GPU device issues and the use of --gpu-map.
- Support for share logging
- Detect poorly performing combination of SDK and phatk kernel and add verbose
warning at startup.
- Icarus update to new add_cgpu()
- Icarus driver working with Linux and Windows
- api.c fix unused variable compile warning
- Display all OpenCL devices when -n is called as well to allow debugging of
differential mapping of OpenCL to ADL.
- Add a --gpu-map option which will allow arbitrarily mapping ADL devices to
OpenCL devices for instances where association by enumeration alone fails.
- Increase upper limit on number of extra items to queue as some FPGA code can't
yet reliably keep many devices busy.
- Display configuration file information when -c option is passed and only when
file exists on loading default config file.
- Display configuration file loaded, if any, and debug output if configuration
file parsing failed.
- Add missing ztex header to Makefile for distribution.
- Document long-form COM port device names on Windows, required to specify
serial ports above 9
- Include ztex bitstreams firmware in distribution and install if configured in.
- Style police on driver-ztex.c
- work_restart should only be changed by cgminer.c now
- Shut down the api cleanly when the api thread is cancelled. This should allow
the api socket to be closed successfully to next be reopened with app_restart.
- Make a union for cgpu device handles, and rename "device" to "device_ztex"
since it's Ztex-specific
- Initialise name variable.
- Remove unnecessary check for variable that always has memory allocated.
- Bugfix: Missing "break" no-op in default case
- Make the status window and log window as large as can fit on startup,
rechecking to see if it can be enlarged after the fact. This allows any number
of devices to be displayed provided the window is made long enough without
corrupting the output.
- Style police on libztex.c.
- API add removepool like the screen interface
- api.c escape required characters in return strings + pools returns the
username
- Set lp_path to NULL after free for consistency.
- Removing dmalloc import left behind by mistake
- Fixing leak in resp_hdr_cb
- miner.php warning highlight GPU stats if they are zero (e.g. ADL not enabled)
- miner.php highlight any device that isn't 'Enabled'
- miner.php highlight any Status that isn't 'Alive'
- miner.php optionally support multiple rigs
- Initial Ztex support 1.15x board.


CGMiner Version 2.3.3 - April 15, 2012

- Don't even display that cpumining is disabled on ./configure to discourage
people from enabling it.
- Do a complete cgminer restart if the ATI Display Library fails, as it does on
windows after running for some time, when fanspeed reporting fails.
- Cache the initial arguments passed to cgminer and implement an attempted
restart option from the settings menu.
- Disable per-device status lines when there are more than 8 devices since
screen output will be corrupted, enumerating them to the log output instead at
startup.
- Reuse Vals[] array more than W[] till they're re-initialised on the second
sha256 cycle in poclbm kernel.
- Minor variable alignment in poclbm kernel.
- Make sure to disable devices with any status not being DEV_ENABLED to ensure
that thermal cutoff code works as it was setting the status to DEV_RECOVER.
- Re-initialising ADL simply made the driver fail since it is corruption over
time within the windows driver that's responsible. Revert "Attempt to
re-initialise ADL should a device that previously reported fanspeed stops
reporting it."
- Microoptimise poclbm kernel by ordering Val variables according to usage
frequency.


CGMiner Version 2.3.2 - March 31, 2012

- Damping small changes in hashrate so dramatically has the tendency to always
make the hashrate underread so go back to gentle damping instead.
- Revert the crossover of variables from Vals to W in poclbm kernel now that
Vals are the first declared variables so they're used more frequently.
- Vals variables appearing first in the array in poclbm is faster.
- Change the preferred vector width to 1 for Tahiti only, not all poclbm
kernels.
- Use a time constant 0.63 for when large changes in hashrate are detected to
damp change in case the large change is an aliasing artefact instead of a real
chang
- Only increment stale counter if the detected stales are discarded.
- Attempt to re-initialise ADL should a device that previously reported fanspeed
stops reporting it.
- Move the ADL setup and clearing to separate functions and provide a reinit_adl
function to be used when adl fails while running.
- Use slightly more damping on the decay time function in the never-ending quest
to smooth off the hashmeter.
- Set the starting fanspeed to a safe and fairly neutral 50% when autofan is
enabled.
- Provide locking around updates of cgpu hashrates as well to prevent multiple
threads accessing data fields on the same device.
- Display the beginning of the new block in verbose mode in the logs.
- Reinstate old diablo kernel variable ordering from 120222, adding only goffset
and vector size hint. The massive variable ordering change only helped one SDK
on
- Change the version number on the correct kernels.
- api.c devicecode/osinfo incorrectly swapped for json
- Add extensive instructions on how to make a native windows build.
- Update version numbers of poclbm and diablo kernels as their APIs have also
changed.
- Use global offset parameter to diablo and poclbm kernel ONLY for 1 vector
kernels.
- Use poclbm preferentially on Tahiti now regardless of SDK.
- Remove unused constant passed to poclbm.
- Clean up use of macros in poclbm and use bitselect everywhere possible.
- Add vector type hint to diablo kernel.
- Add worksize and vector attribute hints to the poclbm kernel.
- Spaces for non-aligned variables in poclbm.
- Swap Vals and W variables where they can overlap in poclbm.
- More tidying of poclbm.
- Tidy up first half of poclbm.
- Clean up use of any() by diablo and poclbm kernels.
- Minor variable symmetry changes in poclbm.
- Put additions on separate lines for consistency in poclbm.
- Consolidate last use of W11 into Vals4 in poclbm.
- Change email due to SPAM
- api.c miner.php add a '*' to the front of all notify counters - simplifies
future support of new counters
- miner.php add display 'notify' command
- Small change to help arch's without processor affinity
- Fix bitforce compile error
- api.c notify should report disabled devices also - of course
- API returns the simple device history with the 'notify' command
- code changes for supporting a simple device history
- api.c Report an OS string in config to help with device issues
- api.c fix Log Interval - integer in JSON
- api.c config 'Device Code' to show list of compiled devices + README
- api.c increase buffer size close to current code allowable limit
- removed 8-component vector support from kernel, as this is not supported in
CGMINER anyway
- forgot to update kernel modification date, fixed ;)
- reordered an addition in the kernel, which results in less instructions used
in the GPU ISA code for GCN
- miner.php: option for readonly or check privileged access
- Ignore reduntant-with-build options --disable-gpu, --no-adl, and --no-restart
- miner.php: ereg_replace is DEPRECATED so use preg_replace instead
- Make curses TUI support optional at compile-time.
- Bugfix: AC_ARG_WITH provides withval instead of enableval
- miner.php split devs output for different devices
- api.c: correct error messages
- icarus.c modify (regular) timeout warning to only be debug
- icarus.c set the windows TODO timeout
- Allow specifying a specific driver for --scan-serial
- optimized nonce-check and output code for -v 2 and -v 4
- Bugfix: Check for libudev header (not just library) in configure, and document
optional dependency
- Add API support for Icarus and Bitforce
- Next API version is 1.4 (1.3 is current)
- README/api.c add "When" the request was processed to STATUS
- Bugfix: ZLX to read BitFORCE temp, not ZKX -.-
- Use libudev to autodetect BitFORCE GPUs, if available
- Use the return value of fan_autotune to set fan_optimal instead of passing it
as a pointer.
- Pass the lasttemp from the device we're using to adjust fanspeed in twin
devices.
- fix the name to 3 chars, fix the multi-icarus support
- Bugfix: "-S auto" is the default if no -S is specified, and there is no such
delay in using it
- README add information missing from --scan-serial
- Update README RPC API Version comment
- Bugfix: Allow enabling CPU even without OpenCL support
- Change failed-to-mine number of requested shares messge to avoid segfault on
recursive calling of quit().
- Get rid of extra char which is just truncated in poclbm kernel.
- only small code formating changes
- removed vec_step() as this could lead to errors on older SDKs
- unified code for generating nonce in kernel and moved addition of base to the
end -> faster

CGMiner Version 2.3.1 - February 24, 2012

- Revert input and output code on diakgcn and phatk kernels to old style which
worked better for older hardware and SDKs.
- Add a vector*worksize parameter passed to those kernels to avoid one op.
- Increase the speed of hashrate adaptation.
- Only send out extra longpoll requests if we want longpolls.
- API implement addpool command
- API return the untouched Total MH also (API now version 1.3)
- Add enable/disablepool to miner.php example and reduce font size 1pt


CGMiner Version 2.3.0 - February 23, 2012

- Consider extra longpoll work items as staged_extra so as to make sure we queue
more work if queueing regular work items as longpolls.
- Use diablo kernel on all future SDKs for Tahiti and set preferred vector width
to 1 on poclbm kernel only.
- Explicitly type the constants in diakgcn kernel as uint, to be in line with
poclbm kernel.
- Reset all hash counters at the same time as resetting start times to get
accurate hashrates on exiting which is mandatory for benchmarking.
- Report thread out before it starts to avoid being flagged as sick when waiting
for the first work item.
- Don't disable and re-enable devices as they may recover and in the meantime
have their status set to OFF.
- API new commands enablepool and disablepool (version already incremented)
- Tolerate new-format temperature readings for bitforce
- Modify cgminer.c pool control to allow API to call it
- Bugfix: Fix BitFORCE driver memory leak in debug logging
- Extra byte was being unused in poclbm leading to failure on some platforms.
- Explicitly type the constants in poclbm kernel as uint.
- Don't save 'include' when saving the configuration
- Allow configuration file to include another recursively
- Use the SDK and hardware information to choose good performing default
kernels.
- Move phatk kernel to offset vector based nonce bases as well.
- Add a --benchmark feature which works on a fake item indefinitely to compare
device performance without any server or networking influence.
- Allow writing of multiple worksizes to the configuration file.
- Allow writing of multiple vector sizes to the configuration file.
- Allow writing of multiple kernels to the configuration file.
- Allow multiple different kernels to be chosen per device.
- Allow the worksize to be set per-device.
- Allow different vectors to be set per device.
- If we're well below the target temperature, increase gpu engine speed back to
maximum in case we have gotten lost between profiles during an idle period.
- We should be setting the value of fan_optimal, not its address.
- As all kernels will be new versions it's an opportunity to change the .bin
format and make it simpler. Specifying bitalign is redundant and long can be l.
- Use any() in kernel output code.
- Put the nonce for each vector offset in advance, avoiding one extra addition
in the kernel.
- Reset times after all mining threads are started to make estimating hashrates
easier at startup.
- Bugfix: allow no-exec (NX) stack
- Fix minor warning.
- fix the bitforce.c code style follow 1TBS
- fix icarus.c compile warning
- small changes to speedup no vec for AMD 898.1 OCL runtime
- Update licensing to GPL V3.
- Reset the longpoll flag after it's been used once to prevent it restarting
work again.
- Begin import of DiabloMiner kernel.
- Modify API debug messages to say API instead of DBG
- When API shuts down cgminer don't kill itself
- Don't make rolled work from the longpoll be seen as other longpoll work items.
- API add 'privileged' command so can verify access level
- Set the lp_sent variable under lock since there will almost always be a race
on setting this variable, potentially leading to multiple LPs being sent out.
- API restrict access to all non display commands by default
- Update API version to 1.2 for new 'Log Interval'
- API add --log Interval to 'config' reply
- --api-allow special case 0/0 means all


CGMiner Version 2.2.7 - February 20, 2012

- Send out extra longpolls when we have switched pools and the longpoll thread
is still bound to the old one. This is particularly useful with p2pool where
longpolls do not correlate with main bitcoin block change and would have led to
high reject rates on failover.
- Store whether a work item is the result of a longpoll or not in struct work
and use it to help determine block changes directly from the work longpoll bool.
- Keep track of when a longpoll has been sent for a pool and if the current pool
is requesting work but has not sent a longpoll request, convert one of the work
items to a longpoll.
- Store the longpoll url in the pool struct and update it from the pool_active
test in case it changes. This is to allow further changes to longpoll management
on switching pools.
- Re-check for a longpoll supporting pool every 30 seconds if none is found
initially.
- Report threads as busy waiting on getwork on startup to avoid them being
flagged sick on startup during slow networking.
- Allow devices that are disabled due to overheating to be flagged as recovering
instead of disabling them and re-enable them if they're below ideal temperatures
- Tahiti prefers worksize 64 with poclbm.
- No need to expressly retain the opencl program now that the zero binary issue
is fixed. This actually fixes cgminer to work with the latest SDK included with
the ATI catalyst driver 12.2.
- Show error code on any opencl failure status.
- Add detection for version 898.1 SDK as well but only give SDK 2.6 warning once
on startup instead of with each device initialisation.
- Always use a fresh connection for longpoll as prolonged persistent connections
can fail for many reasons.
- Keep track of intended engine clock speed and only adjust up if it's higher
than the last intended speed. This avoids setting the clock speed to one
relative to a lower profile one by mistake.
- Use gpu-memdiff on startup if an engine clockspeed is set and a memdiff value
is set.
- Revert "Adjust engine speed up according to performance level engine setting,
not the current engine speed." - ineffectual.
- Freeze the queues on all threads that are sent the pause message to prevent
them trying to start up again with saved pings in their queues.
- Updates to diakgcn kernel/
- Consolidate all screen updates to the watchdog thread and touch both windows
before refresh.
- Curses will be disabled in clean_up so don't do it early in kill_work, and
disable_adl so that GPU settings may be restored to normal in case shutting down
curses leads to instability on windows.
- Stop the mining threads before trying to kill them.
- Plain refresh() does not give reliably screen updates so get rid of all uses
of it.
- First release with working diakgcn kernel.

CGMiner Version 2.2.6 - February 16, 2012

- Provide warning on each startup about sdk 2.6
- Fix unused warnings on win32.
- bitforce: Simplify BFopen WIN32 ifdef/else
- Fix initialization warning with jansson 1.3
- bitforce: Cleanup extraneous TODO that isn't needed
- Move tcsetattr (and new tcflush) into *nix BFopen to simplify things a bit
- Add message explaining 2nd thread disabling for dynamic mode and how to tune
it.
- Move logwindow down once number of devices is known.
- Automatically choose phatk kernel for bitalign non-gcn ATI cards, and then
only select poclbm if SDK2.6 is detected.
- Allow the refresh interval to be adjusted in dynamic intensity with a
--gpu-dyninterval parameter.
- Make curses display visible right from the beginning and fix the window sizes
so the initial messages don't get lost once the status window is drawn.
- The amount of work scanned can fluctuate when intensity changes and since we
do this one cycle behind, we increment the work more than enough to prevent
repeati
- bitforce: Set a 30 second timeout for serial port on Windows, since the
default is undefined
- Use PreVal4addT1 instead of PreVal4 in poclbm kernel.
- Import PreVal4 and PreVal0 into poclbm kernel.
- Import more prepared constants into poclbm kernel.
- Keep variables in one array but use Vals[] name for consistency with other
kernel designs.
- Replace constants that are mandatorily added in poclbm kernel with one value.
- Remove addition of final constant before testing for result in poclbm kernel.
- Hand optimise variable addition order.
- Hand optimise first variable declaration order in poclbm kernel.
- Radical reordering machine based first pass to change variables as late as
possible, bringing their usage close together.
- fix strcpy NULL pointer if env HOME unset.
- bitforce: Disable automatic scanning when at least one device is specified
manually
- Unroll all poclbm additions to enable further optimisations.


CGMiner Version 2.2.5 - February 13, 2012

- Make output buffer write only as per Diapolo's suggestion.
- Constify nonce in poclbm.
- Use local and group id on poclbm kernel as well.
- Microoptimise phatk kernel on return code.
- Adjust engine speed up according to performance level engine setting, not the
current engine speed.
- Try to load a binary if we've defaulted to the poclbm kernel on SDK2.6
- Use the poclbm kernel on SDK2.6 with bitalign devices only if there is no
binary available.
- Further generic microoptimisations to poclbm kernel.
- The longstanding generation of a zero sized binary appears to be due to the
OpenCL library putting the binary in a RANDOM SLOT amongst 4 possible binary
locations. Iterate over each of them after building from source till the real
binary is found and use that.
- Fix harmless warnings with -Wsign-compare to allow cgminer to build with -W.
- Fix missing field initialisers warnings.
- Put win32 equivalents of nanosleep and sleep into compat.h fixing sleep() for
adl.c.
- Restore compatibility with Jansson 1.3 and 2.0 (api.c required 2.1)
- Modularized logging, support for priority based logging
- Move CPU chipset specific optimization into device-cpu


CGMiner Version 2.2.4 - February 11, 2012

- Fix double definition of A0 B0 to zeroA zeroB.
- Retain cl program after successfully loading a binary image. May decrease
failures to build kernels at startup.
- Variable unused after this so remove setting it.
- BFI INT patching is not necessarily true on binary loading of files and not
true on ATI SDK2.6+. Report bitalign instead.
- Various string fixes for reject reason.
- Generalize --temp-cutoff and implement support for reading temperature from
BitFORCE FPGAs
- Change message from recovered to alive since it is used on startup as well as
when a pool has recovered.
- Start mining as soon as any pool is found active and rely on the watchpool
thread to bring up other pools.
- Delayed responses from testing pools that are down can hold up the watchdog
thread from getting to its device testing code, leading to false detection of
the GPU not checking in, and can substantially delay auto gpu/auto fan
management leading to overheating. Move pool watching to its own thread.
- Bugfix: BitFORCE index needs to be static to count correctly
- Space out retrieval of extra work according to the number of mining threads.
- Make shutdown more robust. Enable the input thread only after the other
threads exist. Don't kill off the workio thread and use it to exit main() only
if there is an unexpected problem. Use kill_work() for all anticipated shutdowns
where possible. Remove unused thread entry.
- Change poclbm version number.
- One array is faster than 2 separate arrays so change to that in poclbm kernel.
- Microoptimisations to poclbm kernel which increase throughput slightly.
- Import diablominer kernel. Currently disabled as not working.
- Import diapolo kernel. Currently disabled as not working.
- Conflicting entries of cl_kernel may have been causing problems, and
automatically chosen kernel type was not being passed on. Rename the enum to
cl_kernels and store the chosen kernel in each clState.
- Set cl_amd_media_ops with the BITALIGN flag and allow non-bitselect devices to
build.
- ALlow much longer filenames for kernels to load properly.
- Allow different kernels to be used by different devices and fix the logic fail
of overcorrecting on last commit with !strstr.
- Fix kernel selection process and build error.
- queue_phatk_kernel now uses CL_SET_VARG() for base-nonce(s), too
- added OpenCL >= 1.1 detection code, in preparation of OpenCL 1.1 global offset
parameter support
- Use K array explicitly to make it clear what is being added.
- Work items have a tendency to expire at exactly the same time and we don't
queue extra items when there are plenty in the queue, regardless of age. Allow
extra work items to be queued if adequate time has passed since we last
requested work even if over the limit.
- Discard work when failover-only is enabled and the work has come from a
different pool.
- Missing include to build on newer mingw32.
- Move from the thread safe localtime_r to regular localtime which is the only
one supported on newer pthread libraries on mingw32 to make it compile with the
newer ming. Thread safety is of no importance where localtime is used in this
code.
- Define in_addr_t in windows if required
- sys/wait.h not required in windows
- Allow API to restrict access by IP address
- Add pool switching to example miner.php
- Display X-Reject-Reason, when provided
- Remove the test for whether the device is on the highest profil level before
raising the GPU speed as it is ineffectual and may prevent raising the GPU
speed.
- Remove unnecessary check for opt_debug one every invocation of applog at
LOG_DEBUG level and place the check in applog().


CGMiner Version 2.2.3 - February 6, 2012

- Revert "Rewrite the convoluted get_work() function to be much simpler and roll
work as much as possible with each new work item." This seems to cause a race on
work in free_work(). Presumably other threads are still accessing the structure.


CGMiner Version 2.2.2 - February 6, 2012

- Provide support for the submitold extension on a per-pool basis based on the
value being detected in a longpoll.
- Don't send a ping to a dynamic device if it's not enabled as that will just
enable it for one pass and then disable it again.
- Rewrite the convoluted get_work() function to be much simpler and roll work as
much as possible with each new work item.
- Roll as much work as possible from the work returned from a longpoll.
- Rolling work on each loop through the mining thread serves no purpose.
- Allow to stage more than necessary work items if we're just rolling work.
- Replace divide_work with reuse_work function used twice.
- Give rolled work a new ID to make sure there is no confusion in the hashtable
lookups.
- Remove now-defunct hash_div variables.
- Remove unused get_dondata function.
- Silence ADL warnings.
- Silence unused parameter warnings.
- Stagger the restart of every next thread per device to keep devices busy ahead
of accessory threads per device.
- Deprecate the --donation feature. Needlessly complex, questionable usefulness,
depends on author's server and a central pool of some kind, and was not heavily
adopted.
- It's devices that report back now, not threads, update message.
- Continue auto-management of fan and engine speeds even if a device is disabled
for safety reasons.
- No need to check we're highest performance level when throttling GPU engine
speed.
- Abstract out tests for whether work has come from a block that has been seen
before and whether a string is from a previously seen block.
- Probe but don't set the timeout to 15 seconds as some networks take a long
time to timeout.
- Remove most compiler warnings from api.c
- Add last share's pool info in cgpu_info
- Allow the OpenCL platform ID to be chosen with --gpu-platform.
- Iterate over all platforms displaying their information and number of devices
when --ndevs is called.
- Deprecate main.c
- Some networks can take a long time to resolve so go back to 60 second timeouts
instead of 15.
- Only enable curses on failure if curses is desired.
- Fix warnings in bitforce.c
- Bugfix: Need to open BitForce tty for read-write
- Fix various build issues.
- Modularize code: main.c -> device-cpu + device-gpu
- Fix phatk kernel not working on non-bitalign capable devices (Nvidia, older
ATI).
- Update poclbm kernel for better performance on GCN and new SDKs with bitalign
support when not BFI INT patching. Update phatk kernel to work properly for non
BFI INT patched kernels, providing support for phatk to run on GCN and non-ATI
cards.
- Return last accepted share pool/time for devices
- Display accepted share pool/time for CPUs
- Bug intensity always shows GPU 0
- Update example web miner.php to use new API commands


CGMiner Version 2.2.1 - January 30, 2012

NOTE - The GPU Device reordering in 2.2.0 by default was considered a bad idea
so the original GPU ordering is used by default again unless reordering is
explicitly requested.

- Fix bitforce failing to build into cgminer.
- Add missing options to write config function.
- Add a --gpu-reorder option to only reorder devices according to PCI Bus ID
when requested.
- Fix for midstate support being broken on pools that supported no-midstate
work by ensuring numbers are 32 bits in sha2.c
- Set virtual GPUs to work when ADL is disabled or all mining will occur on GPU
0.
- Add information about paused threads in the menu status.
- Disable all but the first thread on GPUs in dynamic mode for better
interactivity.
- Set the latest network access time on share submission for --net-delay even if
we're not delaying that submission for further network access.
- Clear adl on exiting after probing values since it may attempt to overclock.
- As share submission is usually staggered, and delays can be costly, submit
shares without delay even when --net-delay is enabled.
- Display GPU number and device name when ADL is successfully enabled on it.
- Display GPU ordering remapping in verbose mode.
- Don't fail in the case the number of ADL and OpenCL devices do not match, and
do not attempt to reorder devices unless they match. Instead give a warning
about
- Display error codes should ADL not return ADL_OK in the more critical function
calls.
- Fix unused warning.
- Fix compile warnings in api.c
- Add extensive ADL based device info in debug mode.
- Make --ndevs display verbose opencl information as well to make debugging
version information easier.
- Display information about the opencl platform with verbose enabled.
- Explicitly check for nvidia in opencl platform strings as well.


CGMiner Version 2.2.0 - January 29, 2012

NOTE: GPU Device order will change with this release with ATI GPUs as cgminer
now can enumerate them according to their Bus ID which means the values should
now correlate with their physical position on the motherboard.

- Default to poclbm kernel on Tahiti (7970) since phatk does not work, even
though performance is sub-standard so that at least it will mine successfully by
defau
- Retain cl program after every possible place we might build the program.
- Update ADL SDK URL.
- Fix potential overflow.
- Map GPU devices to virtual devices in their true physical order based on
BusNumber.
- Change the warning that comes with failure to init cl on a device to be more
generic and accurate.
- Advertise longpoll support in X-Mining-Extensions
- Detect dual GPU cards by iterating through all GPUs, finding ones without
fanspeed and matching twins with fanspeed one bus ID apart.
- Do not attempt to build the program that becomes the kernel twice. This could
have been leading to failures on initialising cl.
- Some opencl compilers have issues with no spaces after -D in the compiler
options.
- Allow intensity up to 14.
- Use calloced stack memory for CompilerOptions to ensure sprintf writes to the
beginning of the char.
- Whitelist 79x0 cards to prefer no vectors as they perform better without.
- Adjust fan speed gently while in the optimal range when temperature is
drifting to minimise overshoot in either direction.
- Detect dual GPU cards via the indirect information of - 1st card has a fan
controller. 2nd card does not have a fan controller, cards share the same device
name
- Instead of using the BFI_INT patching hack on any device reporting
cl_amd_media_ops, create a whitelist of devices that need it. This should enable
GCN architec
- Fixed API compiling issue on OS X
- Add more explanation of JSON format and the 'save' command
- Return an error if using ADL API commands when it's not available
- Read off lpThermalControllerInfo from each ADL device.
- Add ADL_Overdrive5_ThermalDevices_Enum interface.
- Add API commands: config, switchpool, gpu settings, save
- Implement socks4 proxy support.
- Fix send() for JSON strings
- Introduce a --net-delay option which guarantees at least 250ms between any
networking requests to not overload slow routers.
- Generalise locking init code.
- Allow invalid values to be in the configuration file, just skipping over them
provided the rest of the file is valid JSON. This will allow older configurat
- Allow CPU mining explicitly enable only if other mining support is built in.
- BitForce FPGA support
- Configure out building and support of all CPU mining code unless
--enable-cpumining is enabled.
- Allow parsed values to be zero which will allow 0 values in the config file to
work.
- Advertise that we can make our own midstate, so the pool can skip generating
it for us
- Refactor the CPU scanhash_* functions to use a common API. Fixes bugs.
- Don't consider a pool lagging if a request has only just been filed. This
should decrease the false positives for "pool not providing work fast enough".
- Invalidating work after longpoll made hash_pop return no work giving a false
positive for dead pool. Rework hash_pop to retry while finds no staged work u
- Remove TCP_NODELAY from curl options as many small packets may be contributing
to network overload, when --net-delay is enabled.
- Refactor miner_thread to be common code for any kind of device
- Simplify submit_nonce loop and avoid potentially missing FOUND - 1 entry.
Reported by Luke-Jr.
- Micro-optimisation in sha256_sse2 code courtesy of Guido Ascioti
guido.ascioti@gmail.com
- Refactor to abstract device-specific code


CGMiner Version 2.1.2 - January 6, 2012

- If api-description is specified, save it when writing the config file
- Adjust utility width to be constant maximum as well.
- Add percent signs to reject ratio outputs
- Should the donation pool fail, don't make the fallover pool behave as though
the primary pool is lagging.
- Use an alternative pool should the donation getwork fail.


CGMiner Version 2.1.1 - January 1, 2012

- Include API examples in distribution tarball.
- Don't attempt to pthread_join when cancelling threads as they're already
detached and doing so can lead to a segfault.
- Give more generic message if slow pool at startup is the donation pool.
- Continue to attempt restarting GPU threads if they're flagged dead at 1 min.
intervals.
- Don't attempt to restart sick flagged GPUs while they're still registering
activity.
- Make curl use fresh connections whenever there is any communication issue
in case there are dead persistent connections preventing further comms from
working.
- Display pool in summary if only 1 pool.
- Adjust column width of A/R/HW to be the maximum of any device and align them.


CGMiner Version 2.1.0 - December 27, 2011

- Major infrastructure upgrade with RPC interface for controlling via sockets
encoded with/without JSON courtesy of Andrew Smith. Added documentation for
use of the API and sample code to use with it.
- Updated linux-usb-cgminer document.
- Rewrite of longpoll mechanism to choose the current pool wherever possible to
use for the longpoll, or any pool that supports longpoll if the current one
does not.
- Display information about longpoll when the chosen server has changed.
- Fix the bug where longpoll generated work may have been sent back to the
wrong pool, causing rejects.
- Fix a few race conditions on closing cgminer which caused some of the crashes
on exit.
- Only adjust gpu engine speed in autotune mode if the gpu is currently at the
performance level of that being adjusted.
- Various fixes for parsing/writing of configuration files.
- Do not add blank lines for threads of unused CPUs.
- Show which pool is unresponsive on startup.
- Only show GPU management menu item if GPUs are in use.
- Align most device columns in the curses display.


CGMiner Version 2.0.8 - November 11, 2011

- Make longpoll do a mandatory flushing of all work even if the block hasn't
changed, thus supporting longpoll initiated work change of any sort and merged
mining.
- Byteswap computed hash in hashtest so it can be correctly checked. This fixes
the very rare possibility that a block solve on solo mining was missed.
- Add x86_64 w64 mingw32 target
- Allow a fixed speed difference between memory and GPU clock speed with
--gpu-memdiff that will change memory speed when GPU speed is changed in
autotune mode.
- Don't load the default config if a config file is specified on the command
line.
- Don't build VIA on apple since -a auto bombs instead of gracefully ignoring
VIA failing.
- Build fix for dlopen/dlclose errors in glibc.


CGMiner Version 2.0.7 - October 17, 2011

- Support work without midstate or hash1, which are deprecated in bitcoind 0.5+
- Go to kernel build should we fail to clCreateProgramWithBinary instead of
failing on that device. This should fix the windows problems with devices not
initialising.
- Support new configuration file format courtesy of Chris Savery which can write
the config file from the menu and will load it on startup.
- Write unix configuration to .cgminer/cgminer.conf by default and prompt to
overwrite if given a filename from the menu that exists.


CGMiner Version 2.0.6 - October 9, 2011

- Must initialise the donorpool mutex or it fails on windows.
- Don't make donation work interfere with block change detection allowing
donation to work regardless of the block chain we're mining on.
- Expire shares as stale with a separate timeout from the scantime, defaulting
to 120 seconds.
- Retry pools after a delay of 15 seconds if none can be contacted on startup
unless a key is pressed.
- Don't try to build adl features without having adl.
- Properly check shares against target difficulty - This will no longer show
shares when solo mining at all unless they're considered to be a block solve.
- Add altivec 4 way (cpu mining) support courtesy of Gilles Risch.
- Try to use SSL if the server supports it.
- Display the total solved blocks on exit (LOL if you're lucky).
- Use ADL activity report to tell us if a sick GPU is still busy suggesting it
is hard hung and do not attempt to restart it.


CGMiner Version 2.0.5 - September 27, 2011

- Intensity can now be set to dynamic or static values per-device.
- New donation feature --donation sends a proportion of shares to author's
account of choice, but is disabled by default!
- The hash being displayed and block detection has been fixed.
- Devices not being mined on will not attempt to be ADL managed.
- Intensity is now displayed per GPU device.
- Make longpoll attempt to restart as often as opt_retries specifies.
- We weren't rolling work as often as we could.
- Correct some memory management issues.
- Build fixes.
- Don't mess with GPUs if we don't have them.


CGMiner Version 2.0.4 - September 23, 2011

- Confused Longpoll messages should be finally fixed with cgminer knowing for
sure who found the new block and possibly avoiding a rare crash.
- Display now shows the actual hash and will say BLOCK! if a block is deemed
solved.
- Extra spaces, which would double space lines on small terminals, have been
removed.
- Fan speed change is now damped if it is already heading in the correct
direction to minimise overshoot.
- Building without opencl libraries is fixed.
- GPUs are autoselected if there is only one when in the GPU management menu.
- GPU menu is refreshed instead of returning to status after a GPU change.


CGMiner Version 2.0.3 - September 17, 2011

- Various modes of failure to set fanspeeds and adl values have been addressed
and auto-fan should work now on most hardware, and possibly other values
which previously would not have worked.
- Fixed a crash that can occur on switching pools due to longpoll thread races.
- Use ATISTREAMSDKROOT if available at build time.
- Fanspeed management is returned to the driver default on exit instead of
whatever it was when cgminer was started.
- Logging of events deemed WARNING or ERR now will display even during
periods where menu input is being awaited on.


CGMiner Version 2.0.2 - September 11, 2011

- Exit cleanly if we abort before various threads are set up or if they no
longer exist.
- Fix a rare crash in HASH_DEL due to using different mutexes to protect the
data.
- Flag devices that have never started and don't allow enabling of devices
without restarting them.
- Only force the adapter speed to high if we've flagged this device as being
managed.
- Flag any devices with autofan or autogpu as being managed.
- Use a re-entrant value to store what fanspeed we're trying to set in case the
card doesn't support small changes.     Force it to a multiple of 10% if it
fails on trying to speed up the fan.
- Do not bother resetting values to old ones if changes to GPU parameters report
failure, instead returning a failure code only if the return value from get()
differs.
- Remove redundant check.
- Only display supported values from fanspeed on change settings.
- Missing bracket from output.
- Display fan percentage on devices that only support reporting percent and not
RPM.
- Properly substitute DLOPEN flags to build with ADL support when -ldl is needed
and not when opencl is not found.


CGMiner Version 2.0.1 - September 9, 2011

- Fix building on 32bit glibc with dlopen with -lpthread and -ldl
- ByteReverse is not used and the bswap opcode breaks big endian builds. Remove
it.
- Ignore whether the display is active or not since only display enabled devices
work this way, and we skip over repeat entries anwyay.
- Only reset values on exiting if we've ever modified them.
- Flag adl as active if any card is successfully activated.
- Add a thermal cutoff option as well and set it to 95 degrees by default.
- Change the fan speed by only 5% if it's over the target temperature but less
than the hysteresis value to minimise overshoot down in temperature.
- Add a --no-adl option to disable ADL monitoring and GPU settings.
- Only show longpoll received delayed message at verbose level.
- Allow temperatures greater than 100 degrees.
- We should be passing a float for the remainder of the vddc values.
- Implement accepting a range of engine speeds as well to allow a lower limit to
be specified on the command line.
- Allow per-device fan ranges to be set and use them in auto-fan mode.
- Display which GPU has overheated in warning message.
- Allow temperature targets to be set on a per-card basis on the command line.
- Display fan range in autofan status.
- Setting the hysteresis is unlikely to be useful on the fly and doesn't belong
in the per-gpu submenu.
- With many cards, the GPU summaries can be quite long so use a terse output
line when showing them all.
- Use a terser device status line to show fan RPM as well when available.
- Define max gpudevices in one macro.
- Allow adapterid 0 cards to enumerate as a device as they will be non-AMD
cards, and enable ADL on any AMD card.
- Do away with the increasingly confusing and irrelevant total queued and
efficiency measures per device.
- Only display values in the log if they're supported and standardise device log
line printing.


CGMiner Version 2.0.0 - September 6, 2011

Major feature upgrade - GPU monitoring, (over)clocking and fan control for ATI
GPUs.

New command line switches:
--auto-fan-     Automatically adjust all GPU fan speeds to maintain a target
temperature
--auto-gpu-     Automatically adjust all GPU engine clock speeds to maintain
a target temperature
--gpu-engine <arg>  Set the GPU engine (over)clock in Mhz - one value for all or
separate by commas for per card.
--gpu-fan <arg>     Set the GPU fan percentage - one value for all or separate
by commas for per card.
--gpu-memclock <arg> Set the GPU memory (over)clock in Mhz - one value for all
or separate by commas for per card.
--gpu-powertune <arg> Set the GPU powertune percentage - one value for all or
separate by commas for per card.
--gpu-vddc <arg>    Set the GPU voltage in Volts - one value for all or separate
by commas for per card.
--temp-hysteresis <arg> Set how much the temperature can fluctuate outside
limits when automanaging speeds (default: 3)
--temp-overheat <arg> Set the overheat temperature when automatically managing
fan and GPU speeds (default: 85)
--temp-target <arg> Set the target temperature when automatically managing fan
and GPU speeds (default: 75)

- Implement ATI ADL support for GPU parameter monitoring now and setting later
(temp, fan, clocks etc.).
- Check for the presence of the ADL header files in ADL_SDK.
- Import adl_functions.h from amd overdrive ctrl.
- Implement a setup function that tries to detect GPUs that support the ADL and
link in the parameters into the gpus struct.
- Put a summary of monitoring information from the GPU menu.
- Implement changing memory speed and voltage on the fly.
- Implement fan speed setting.
- Minor corrections to set fan speed by percentage.
- Make sure to read off the value in RPM only.
- Implement auto fanspeed adjustment to maintain a target temperature and
fanspeed below 85%, with an overheat check that will speed the fan up to 100%.
- Add an --auto-fan command line option to allow all GPUs to have autofan
enabled from startup.
- Add a gpu autotune option which adjusts GPU speed to maintain a target
temperature within the bounds of the default GPU speed and any overclocking set.
- Avoid a dereference if the longpoll thread doesn't exist.
- Clean up by setting performance profiles and fan settings to startup levels on
exit.
- Add a small amount of hysteresis before lowering clock speed.
- Allow target, overheat and hysteresis temperatures to be set from command
line.
- Combine all stats collating into one function to avoid repeating function
calls on each variable.
- Add gpu statistics to debugging output via the watchdog thread.
- Implement menus to change temperature limits.
- Implement setting the GPU engine clock speed of all devices or each device as
a comma separated value.
- Implement setting the GPU memory clock speed of all devices or each device as
a comma separated value.
- Implement setting the GPU voltage of all devices or each device as a comma
separated value.
- Implement setting the GPU fan speed of all devices or each device as a comma
separated value.
- Add support for monitoring powertune setting.
- Implement changing of powertune value from the GPU change settings menu.
- Get the value of powertune in get_stats.
- Implement setting the GPU powertune value of all devices or each device as a
comma separated value.
- Remove the safety checks in speed setting since confirmation is done first in
the menu, then show the new current values after a short pause.
- Force the speed to high on startup and restore it to whatever the setting was
on exit.
- Add temperature to standard output where possible and use more compact output.
- Move and print at the same time in curses to avoid random trampling display
errors.
- Update the status window only from the watchdog thread, do not rewrite the top
status messages and only refresh once all the status window is complete,
clearing the window each time to avoid corruption.
- Set a safe starting fan speed if we're automanaging the speeds.
- Provide locking around all adl calls to prevent races.
- Lower profile settings cannot be higher than higher profile ones so link any
drops in settings.
- Add new needed text files to distribution.
- Queue requests ignoring the number of staged clones since they get discarded
very easily leading to false positives for pool not providing work fast enough.
- Include libgen.h in opt.c to fix win32 compilation warnings.
- Fix compilation warning on win32.
- Add the directory name from the arguments cgminer was called from as well to
allow it running from a relative pathname.
- Add a --disable-adl option to configure and only enable it if opencl support
exists.
- Retry before returning a failure to get upstream work as a failure to avoid
false positives for pool dead.
- Retry also if the decoding of work fails.
- Use the presence of X-Roll-Ntime in the header as a bool for exists unless N
is found in the response.


CGMiner Version 1.6.2 - September 2, 2011

- Add --failover-only option to not leak work to backup pools when the primary
pool is lagging.
- Change recommendation to intensity 9 for dedicated miners.
- Fix the bouncing short term value by allowing it to change dynamically when
the latest value is very different from the rolling value, but damp the change
when it gets close.
- Use the curses_lock to protect the curses_active variable and test it under
lock.
- Go back to requesting work 2/3 of the way through the current scantime with
CPU mining as reports of mining threads running out of work have occurred with
only 5 seconds to retrieve work.
- Add start and stop time scheduling for regular time of day running or once off
start/stop options.
- Print summary on quit modes.
- Put some sanity checks on the times that can be input.
- Give a verbose message when no active pools are found and pause before
exiting.
- Add verbose message when a GPU fails to initialise, and disable the correct
GPU.
- Cryptopp asm32 was not correctly updated to the incremental nonce code so the
hash counter was bogus.
- Get rid of poorly executed curl check.
- If curl does not have sockopts, do not try to compile the
json_rpc_call_sockopt_cb function, making it possible to build against older
curl libraries.
- Most people expect /usr/local when an unspecified prefix is used so change to
that.
- Rename localgen occasions to getwork fail occasions since localgen is
unrelated now.


CGMiner Version 1.6.1 - August 29, 2011

- Copy cgminer path, not cat it.
- Switching between redrawing windows does not fix the crash with old
libncurses, so redraw both windows, but only when the window size hasn't
changed.
- Reinstate minimum 1 extra in queue to make it extremely unlikely to ever have
0 staged work items and any idle time.
- Return -1 if no input is detected from the menu to prevent it being
interpreted as a 0.
- Make pthread, libcurl and libcurses library checks mandatory or fail.
- Add a --disable-opencl configure option to make it possible to override
detection of opencl and build without GPU mining support.
- Confusion over the variable name for number of devices was passing a bogus
value which likely was causing the zero sized binary issue.
- cgminer no longer supports default url user and pass so remove them.
- Don't show value of intensity since it's dynamic by default.
- Add options to explicitly enable CPU mining or disable GPU mining.
- Convert the opt queue into a minimum number of work items to have queued
instead of an extra number to decrease risk of getting idle devices without
increasing risk of higher rejects.
- Statify tv_sort.
- Check for SSE2 before trying to build 32 bit SSE2 assembly version. Prevents
build failure when yasm is installed but -msse2 is not specified.
- Add some defines to configure.ac to enable exporting of values and packaging,
and clean up output.
- Give convenient summary at end of ./configure.
- Display version information and add --version command line option, and make
sure we flush stdout.
- Enable curses after the mining threads are set up so that failure messages
won't be lost in the curses interface.
- Disable curses after inputting a pool if we requested no curses interface.
- Add an option to break out after successfully mining a number of accepted
shares.
- Exit with a failed return code if we did not reach opt_shares.
- The cpu mining work data can get modified before we copy it if we submit it
async, and the sync submission is not truly sync anyway, so just submit it sync.


CGMiner Version 1.6.0 - August 26, 2011

- Make restarting of GPUs optional for systems that hang on any attempt to
restart them.     Fix DEAD status by comparing it to last live time rather than
last attempted restart time since that happens every minute.
- Move staged threads to hashes so we can sort them by time.
- Create a hash list of all the blocks created and search them to detect when a
new block has definitely appeared, using that information to detect stale work
and discard it.
- Update configure.ac for newer autoconf tools.
- Use the new hashes directly for counts instead of the fragile counters
currently in use.
- Update to latest sse2 code from cpuminer-ng.
- Allow LP to reset block detect and block detect lp flags to know who really
came first.
- Get start times just before mining begins to not have very slow rise in
average.
- Add message about needing one server.
- We can queue all the necessary work without hitting frequent stales now with
the time and string stale protection active all the time.     This prevents a
pool being falsely labelled as not providing work fast enough.
- Include uthash.h in distro.
- Implement SSE2 32 bit assembly algorithm as well.
- Fail gracefully if unable to open the opencl files.
- Make cgminer look in the install directory for the .cl files making make
install work correctly.
- Allow a custom kernel path to be entered on the command line.
- Bump threshhold for lag up to maximum queued but no staged work.
- Remove fragile source patching for bitalign, vectors et. al and simply pass it
with the compiler options.
- Actually check the value returned for the x-roll-ntime extension to make sure
it isn't saying N.
- Prevent segfault on exit for when accessory threads don't exist.
- Disable curl debugging with opt protocol since it spews to stderr.


CGMiner Version 1.5.8 - August 23, 2011

- Minimise how much more work can be given in cpu mining threads each interval.
- Make the fail-pause progressively longer each time it fails until the network
recovers.
- Only display the lagging message if we've requested the work earlier.
- Clean up the pool switching to not be dependent on whether the work can roll
or not by setting a lagging flag and then the idle flag.
- Only use one thread to determine if a GPU is sick or well, and make sure to
reset the sick restart attempt time.
- The worksize was unintentionally changed back to 4k by mistake, this caused a
slowdown.


CGMiner Version 1.5.7 - August 22, 2011

- Fix a crash with --algo auto
- Test at appropriate target difficulty now.
- Add per-device statics log output with --per-device-stats
- Fix breakage that occurs when 1 or 4 vectors are chosen on new phatk.
- Make rolltime report debug level only now since we check it every work
item.
- Add the ability to enable/disable per-device stats on the fly and match
logging on/off.
- Explicitly tell the compiler to retain the program to minimise the chance of
the zero sized binary errors.
- Add one more instruction to avoid one branch point in the common path in the
cl return code. Although this adds more ALUs overall and more branch points, the
common path code has the same number of ALUs and one less jmp, jmps being more
expensive.
- Explicitly link in ws2_32 on the windows build and update README file on how
to compile successfully on windows.
- Release cl resources should the gpu mining thread abort.
- Attempt to restart a GPU once every minute while it's sick.
- Don't kill off the reinit thread if it fails to init a GPU but returns safely.
- Only declare a GPU dead if there's been no sign of activity from the reinit
thread for 10 mins.
- Never automatically disable any pools but just specify them as idle if they're
unresponsive at startup.
- Use any longpoll available, and don't disable it if switching to a server that
doesn't have it. This allows you to mine solo, yet use the longpoll from a pool
even if the pool is the backup server.
- Display which longpoll failed and don't free the ram for lp_url since it
belongs to the pool hdr path.
- Make the tcp setsockopts unique to linux in the hope it allows freebsd et. al
to compile.


CGMiner Version 1.5.6 - August 17, 2011

- New phatk and poclbm kernels. Updated phatk to be in sync with latest 2.2
courtesy of phateus. Custom modified to work best with cgminer.
- Updated output buffer code to use a smaller buffer with the kernels.
- Clean up the longpoll management to ensure the right paths go to the right
pool and display whether we're connected to LP or not in the status line.


CGMiner Version 1.5.5 - August 16, 2011

- Rework entirely the GPU restart code. Strike a balance between code that
re-initialises the GPU entirely so that soft hangs in the code are properly
managed, but if a GPU is completely hung, the thread restart code fails
gracefully, so that it does not take out any other code or devices. This will
allow cgminer to keep restarting GPUs that can be restarted, but continue
mining even if one or more GPUs hangs which would normally require a reboot.
- Add --submit-stale option which submits all shares, regardless of whether they
would normally be considered stale.
- Keep options in alphabetical order.
- Probe for slightly longer for when network conditions are lagging.
- Only display the CPU algo when we're CPU mining.
- As we have keepalives now, blaming network flakiness on timeouts appears to
have been wrong.     Set a timeout for longpoll to 1 hour, and most other
network connectivity to 1 minute.
- Simplify output code and remove HW errors from CPU stats.
- Simplify code and tidy output.
- Only show cpu algo in summary if cpu mining.
- Log summary at the end as per any other output.
- Flush output.
- Add a linux-usb-cgminer guide courtesy of Kano.


CGMiner Version 1.5.4 - August 14, 2011

- Add new option: --monitor <cmd> Option lets user specify a command <cmd> that
will get forked by cgminer on startup. cgminer's stderr output subsequently gets
piped directly to this command.
- Allocate work from one function to be able to initialise variables added
later.
- Add missing fflush(stdout) for --ndevs and conclusion summary.
- Preinitialise the devices only once on startup.
- Move the non cl_ variables into the cgpu info struct to allow creating a new
cl state on reinit, preserving known GPU variables.
- Create a new context from scratch in initCQ in case something was corrupted to
maximise our chance of succesfully creating a new worker thread. Hopefully this
makes thread restart on GPU failure more reliable, without hanging everything
in the case of a completely wedged GPU.
- Display last initialised time in gpu management info, to know if a GPU has
been re-initialised.
- When pinging a sick cpu, flush finish and then ping it in a separate thread in
the hope it recovers without needing a restart, but without blocking code
elsewhere.
- Only consider a pool lagging if we actually need the work and we have none
staged despite queue requests stacking up. This decreases significantly the
amount of work that leaks to the backup pools.
- The can_roll function fails inappropriately in stale_work.
- Only put the message that a pool is down if not pinging it every minute. This
prevents cgminer from saying pool down at 1 minute intervals unless in debug
mode.
- Free all work in one place allowing us to perform actions on it in the future.
- Remove the extra shift in the output code which was of dubious benefit. In
fact in cgminer's implementation, removing this caused a miniscule speedup.
- Test each work item to see if it can be rolled instead of per-pool and roll
whenever possible, adhering to the 60 second timeout. This makes the period
after a longpoll have smaller dips in throughput, as well as requiring less
getworks overall thus increasing efficiency.
- Stick to rolling only work from the current pool unless we're in load balance
mode or lagging to avoid aggressive rolling imitating load balancing.
- If a work item has had any mining done on it, don't consider it discarded
work.


CGMiner Version 1.5.3 - July 30, 2011

- Significant work went into attempting to make the thread restart code robust
to identify sick threads, tag them SICK after 1 minute, then DEAD after 5
minutes of inactivity and try to restart them. Instead of re-initialising the
GPU completely, only a new cl context is created to avoid hanging the rest of
the GPUs should the dead GPU be hung irrevocably.
- Use correct application name in syslog.
- Get rid of extra line feeds.
- Use pkg-config to check for libcurl version
- Implement per-thread getwork count with proper accounting to not over-account
queued items when local work replaces it.
- Create a command queue from the program created from source which allows us
to flush the command queue in the hope it will not generate a zero sized binary
any more.
- Be more willing to get work from the backup pools if the work is simply being
queued faster than it is being retrieved.


CGMiner Version 1.5.2 - July 28, 2011

- Restarting a hung GPU can hang the rest of the GPUs so just declare it dead
and provide the information in the status.
- The work length in the miner thread gets smaller but doesn't get bigger if
it's under 1 second.     This could end up leading to CPU under-utilisation and
lower and lower hash rates.     Fix it by increasing work length if it drops
under 1 second.
- Make the "quiet" mode still update the status and display errors, and add a
new --real-quiet option which disables all output and can be set once while
running.
- Update utility and efficiency figures when displaying them.
- Some Intel HD graphics support the opencl commands but return errors since
they don't support opencl. Don't fail with them, just provide a warning and
disable GPU mining.
- Add http:// if it's not explicitly set for URL entries.
- Log to the output file at any time with warnings and errors, instead of just
when verbose mode is on.
- Display the correct current hash as per blockexplorer, truncated to 16
characters, with just the time.


CGMiner Version 1.5.1 - July 27, 2011

- Two redraws in a row cause a crash in old libncurses so just do one redraw
using the main window.
- Don't adjust hash_div only up for GPUs. Disable hash_div adjustment for GPUs.
- Only free the thread structures if the thread still exists.
- Update both windows separately, but not at the same time to prevent the double
refresh crash that old libncurses has.     Do the window resize check only when
about to redraw the log window to minimise ncurses cpu usage.
- Abstract out the decay time function and use it to make hash_div a rolling
average so it doesn't change too abruptly and divide work in chunks large enough
to guarantee they won't overlap.
- Sanity check to prove locking.
- Don't take more than one lock at a time.
- Make threads report out when they're queueing a request and report if they've
failed.
- Make cpu mining work submission asynchronous as well.
- Properly detect stale work based on time from staging and discard instead of
handing on, but be more lax about how long work can be divided for up to the
scantime.
- Do away with queueing work separately at the start and let each thread grab
its own work as soon as it's ready.
- Don't put an extra work item in the queue as each new device thread will do so
itself.
- Make sure to decrease queued count if we discard the work.
- Attribute split work as local work generation.
- If work has been cloned it is already at the head of the list and when being
reinserted into the queue it should be placed back at the head of the list.
- Dividing work is like the work is never removed at all so treat it as such.
However the queued bool needs to be reset to ensure we *can* request more work
even if we didn't initially.
- Make the display options clearer.
- Add debugging output to tq_push calls.
- Add debugging output to all tq_pop calls.


CGMiner Version 1.5.0 - July 26, 2011

- Increase efficiency of slow mining threads such as CPU miners dramatically. Do
this by detecting which threads cannot complete searching a work item within the
scantime and then divide up a work item into multiple smaller work items.
Detect the age of the work items and if they've been cloned before to prevent
doing the same work over. If the work is too old to be divided, then see if it
can be time rolled and do that to generate work. This dramatically decreases the
number of queued work items from a pool leading to higher overall efficiency
(but the same hashrate and share submission rate).
- Don't request work too early for CPUs as CPUs will scan for the full
opt_scantime anyway.
- Simplify gpu management enable/disable/restart code.
- Implement much more accurate rolling statistics per thread and per gpu and
improve accuracy of rolling displayed values.
- Make the rolling log-second average more accurate.
- Add a menu to manage GPUs on the fly allowing you to enable/disable GPUs or
try restarting them.
- Keep track of which GPUs are alive versus enabled.
- Start threads for devices that are even disabled, but don't allow them to
start working.
- The last pool is when we are low in total_pools, not active_pools.
- Make the thread restart do a pthread_join after disabling the device, only
re-enabling it if we succeed in restarting the thread. Do this from a separate
thread so as to not block any other code.This will allow cgminer to continue
even if one GPU hangs.
- Try to do every curses manipulation under the curses lock.
- Only use the sockoptfunction if the version of curl is recent enough.


CGMiner Version 1.4.1 - July 24, 2011

- Do away with GET for dealing with longpoll forever. POST is the one that works
everywhere, not the other way around.
- Detect when the primary pool is lagging and start queueing requests on backup
pools if possible before needing to roll work.
- Load balancing puts more into the current pool if there are disabled pools.
Fix.
- Disable a GPU device should the thread fail to init.
- Out of order command queue may fail on osx. Try without if it fails.
- Fix possible dereference on blank inputs during input_pool.
- Defines missing would segfault on --help when no sse mining is built in.
- Revert "Free up resources/stale compilers." - didn't help.
- Only try to print the status of active devices or it would crash.
- Some hardware might benefit from the less OPS so there's no harm in leaving
kernel changes that do that apart from readability of the code.

CGMiner Version 1.4.0 - July 23, 2011

- Feature upgrade: Add keyboard input during runtime to allow modification of
and viewing of numerous settings such as adding/removing pools, changing
multipool management strategy, switching pools, changing intensiy, verbosity,
etc. with a simple keypress menu system.
- Free up resources/stale compilers.
- Kernels are safely flushed in a way that allows out of order execution to
work.
- Sometimes the cl compiler generates zero sized binaries and only a reboot
seems to fix it.
- Don't try to stop/cancel threads that don't exist.
- Only set option to show devices and exit if built with opencl support.
- Enable curses earlier and exit with message in main for messages to not be
lost in curses windows.
- Make it possible to enter server credentials with curses input if none are
specified on the command line.
- Abstract out a curses input function and separate input pool function to allow
for live adding of pools later.
- Remove the nil arguments check to allow starting without parameters.
- Disable/enable echo & cbreak modes.
- Add a thread that takes keyboard input and allow for quit, silent, debug,
verbose, normal, rpc protocol debugging and clear screen options.
- Add pool option to input and display current pool status, pending code to
allow live changes.
- Add a bool for explicit enabling/disabling of pools.
- Make input pool capable of bringing up pools while running.
- Do one last check of the work before submitting it.
- Implement the ability to live add, enable, disable, and switch to pools.
- Only internally test for block changes when the work matches the current pool
to prevent interleaved block change timing on multipools.
- Display current pool management strategy to enable changing it on the fly.
- The longpoll blanking of the current_block data may not be happening before
the work is converted and appears to be a detected block change.     Blank the
current block be
- Make --no-longpoll work again.
- Abstract out active pools count.
- Allow the pool strategy to be modified on the fly.
- Display pool information on the fly as well.
- Add a menu and separate out display options.
- Clean up the messy way the staging thread communicates with the longpoll
thread to determine who found the block first.
- Make the input windows update immediately instead of needing a refresh.
- Allow log interval to be set in the menu.
- Allow scan settings to be modified at runtime.
- Abstract out the longpoll start and explicitly restart it on pool change.
- Make it possible to enable/disable longpoll.
- Set priority correctly on multipools.     Display priority and alive/dead
information in display_pools.
- Implement pool removal.
- Limit rolltime work generation to 10 iterations only.
- Decrease testing log to info level.
- Extra refresh not required.
- With huge variation in GPU performance, allow intensity to go from -10 to +10.
- Tell getwork how much of a work item we're likely to complete for future
splitting up of work.
- Remove the mandatory work requirement at startup by testing for invalid work
being passed which allows for work to be queued immediately.     This also
removes the requirem
- Make sure intensity is carried over to thread count and is at least the
minimum necessary to work.
- Unlocking error on retry. Locking unnecessary anyway so remove it.
- Clear log window from consistent place. No need for locking since logging is
disabled during input.
- Cannot print the status of threads that don't exist so just queue enough work
for the number of mining threads to prevent crash with -Q N.
- Update phatk kernel to one with new parameters for slightly less overhead
again.     Make the queue kernel parameters call a function pointer to select
phatk or poclbm.
- Make it possible to select the choice of kernel on the command line.
- Simplify the output part of the kernel. There's no demonstrable advantage from
more complexity.
- Merge pull request #18 from ycros/cgminer
- No need to make leaveok changes win32 only.
- Build support in for all SSE if possible and only set the default according to
machine capabilities.
- Win32 threading and longpoll keepalive fixes.
- Win32: Fix for mangled output on the terminal on exit.


CGMiner Version 1.3.1 - July 20, 2011

- Feature upgrade; Multiple strategies for failover. Choose from default which
now falls back to a priority order from 1st to last, round robin which only
changes pools when one is idle, rotate which changes pools at user-defined
intervals, and load-balance which spreads the work evenly amongst all pools.
- Implement pool rotation strategy.
- Implement load balancing algorithm by rotating requests to each pool.
- Timeout on failed discarding of staged requests.
- Implement proper flagging of idle pools, test them with the watchdog thread,
and failover correctly.
- Move pool active test to own function.
- Allow multiple strategies to be set for multipool management.
- Track pool number.
- Don't waste the work items queued on testing the pools at startup.
- Reinstate the mining thread watchdog restart.
- Add a getpoll bool into the thread information and don't restart threads stuck
waiting on work.
- Rename the idlenet bool for the pool for later use.
- Allow the user/pass userpass urls to be input in any order.
- When json rpc errors occur they occur in spits and starts, so trying to limit
them with the comms error bool doesn't stop a flood of them appearing.
- Reset the queued count to allow more work to be queued for the new pool on
pool switch.

CGMiner Version 1.3.0 - July 19, 2011

- Massive infrastructure update to support pool failover.
- Accept multiple parameters for url, user and pass and set up structures of
pool data accordingly.
- Probe each pool for what it supports.
- Implement per pool feature support according to rolltime support as
advertised by server.
- Do switching automatically based on a 300 second timeout of locally generated
work or 60 seconds of no response from a server that doesn't support rolltime.
- Implement longpoll server switching.
- Keep per-pool data and display accordingly.
- Make sure cgminer knows how long the pool has actually been out for before
deeming it a prolonged outage.
- Fix bug with ever increasing staged work in 1.2.8 that eventually caused
infinite rejects.
- Make warning about empty http requests not show by default since many
servers do this regularly.


CGMiner Version 1.2.8 - July 18, 2011

- More OSX build fixes.
- Add an sse4 algorithm to CPU mining.
- Fix CPU mining with other algorithms not working.
- Rename the poclbm file to ensure a new binary is built since.
- We now are guaranteed to have one fresh work item after a block change and we
should only discard staged requests.
- Don't waste the work we retrieve from a longpoll.
- Provide a control lock around global bools to avoid racing on them.
- Iterating over 1026 nonces when confirming data from the GPU is old code
and unnecessary and can lead to repeats/stales.
- The poclbm kernel needs to be updated to work with the change to 4k sized
output buffers.
- longpoll seems to work either way with post or get but some servers prefer
get so change to httpget.


CGMiner Version 1.2.7 - July 16, 2011

- Show last 8 characters of share submitted in log.
- Display URL connected to and user logged in as in status.
- Display current block and when it was started in the status line.
- Only pthread_join the mining threads if they exist as determined by
pthread_cancel and don't fail on pthread_cancel.
- Create a unique work queue for all getworks instead of binding it to thread 0
to avoid any conflict over thread 0's queue.
- Clean up the code to make it clear it's watchdog thread being messaged to
restart the threads.
- Check the current block description hasn't been blanked pending the real
new current block data.
- Re-enable signal handlers once the signal has been received to make it
possible to kill cgminer if it fails to shut down.
- Disable restarting of CPU mining threads pending further investigation.
- Update longpoll messages.
- Add new block data to status line.
- Fix opencl tests for osx.
- Only do local generation of work if the work item is not stale itself.
- Check for stale work within the mining threads and grab new work if
positive.
- Test for idle network conditions and prevent threads from being restarted
by the watchdog thread under those circumstances.
- Make sure that local work generation does not continue indefinitely by
stopping it after 10 minutes.
- Tweak the kernel to have a shorter path using a 4k buffer and a mask on the
nonce value instead of a compare and loop for a shorter code path.
- Allow queue of zero and make that default again now that we can track how
work is being queued versus staged. This can decrease reject rates.
- Queue precisely the number of mining threads as longpoll_staged after a
new block to not generate local work.


CGMiner Version 1.2.6 - July 15, 2011

- Put a current system status line beneath the total work status line
- Fix a counting error that would prevent cgminer from correctly detecting
situations where getwork was failing - this would cause stalls sometimes
unrecoverably.
- Limit the maximum number of requests that can be put into the queue which
otherwise could get arbitrarily long during a network outage.
- Only count getworks that are real queue requests.


CGMiner Version 1.2.5 - July 15, 2011

- Conflicting -n options corrected
- Setting an intensity with -I disables dynamic intensity setting
- Removed option to manually disable dynamic intensity
- Improve display output
- Implement signal handler and attempt to clean up properly on exit
- Only restart threads that are not stuck waiting on mandatory getworks
- Compatibility changes courtesy of Ycros to build on mingw32 and osx
- Explicitly grab first work item to prevent false positive hardware errors
due to working on uninitialised work structs
- Add option for non curses --text-only output
- Ensure we connect at least once successfully before continuing to retry to
connect in case url/login parameters were wrong
- Print an executive summary when cgminer is terminated
- Make sure to refresh the status window

CGMiner Versions -> 1.2.4

- Con Kolivas - July 2011. New maintainership of code under cgminer name.
- Massive rewrite to incorporate GPU mining.
- Incorporate original oclminer c code.
- Rewrite gpu mining code to efficient work loops.
- Implement per-card detection and settings.
- Implement vector code.
- Implement bfi int patching.
- Import poclbm and phatk ocl kernels and use according to hardware type.
- Implement customised optimised versions of opencl kernels.
- Implement binary kernel generation and loading.
- Implement preemptive asynchronous threaded work gathering and pushing.
- Implement variable length extra work queues.
- Optimise workloads to be efficient miners instead of getting lots of extra
  work.
- Implement total hash throughput counters, per-card accepted, rejected and
  hw error count.
- Staging and watchdog threads to prevent fallover.
- Stale and reject share guarding.
- Autodetection of new blocks without longpoll.
- Dynamic setting of intensity to maintain desktop interactivity.
- Curses interface with generous statistics and information.
- Local generation of work (xroll ntime) when detecting poor network
connectivity.

cpuminer Version 1.0.2

- Linux x86_64 optimisations - Con Kolivas
- Optimise for x86_64 by default by using sse2_64 algo
- Detects CPUs and sets number of threads accordingly
- Uses CPU affinity for each thread where appropriate
- Sets scheduling policy to lowest possible
- Minor performance tweaks

cpuminer Version 1.0.1 - May 14, 2011

- OSX support

cpuminer Version 1.0 - May 9, 2011

- jansson 2.0 compatibility
- correct off-by-one in date (month) display output
- fix platform detection
- improve yasm configure bits
- support full URL, in X-Long-Polling header

cpuminer Version 0.8.1 - March 22, 2011

- Make --user, --pass actually work

- Add User-Agent HTTP header to requests, so that server operators may
  more easily identify the miner client.

- Fix minor bug in example JSON config file

cpuminer Version 0.8 - March 21, 2011

- Support long polling: http://deepbit.net/longpolling.php

- Adjust max workload based on scantime (default 5 seconds,
  or 60 seconds for longpoll)

- Standardize program output, and support syslog on Unix platforms

- Suport --user/--pass options (and "user" and "pass" in config file),
  as an alternative to the current --userpass

cpuminer Version 0.7.2 - March 14, 2011

- Add port of ufasoft's sse2 assembly implementation (Linux only)
  This is a substantial speed improvement on Intel CPUs.

- Move all JSON-RPC I/O to separate thread.  This reduces the
  number of HTTP connections from one-per-thread to one, reducing resource
  usage on upstream bitcoind / pool server.

cpuminer Version 0.7.1 - March 2, 2011

- Add support for JSON-format configuration file.  See example
  file example-cfg.json.  Any long argument on the command line
  may be stored in the config file.
- Timestamp each solution found
- Improve sha256_4way performance.  NOTE: This optimization makes
  the 'hash' debug-print output for sha256_way incorrect.
- Use __builtin_expect() intrinsic as compiler micro-optimization
- Build on Intel compiler
- HTTP library now follows HTTP redirects

cpuminer Version 0.7 - February 12, 2011

- Re-use CURL object, thereby reuseing DNS cache and HTTP connections
- Use bswap_32, if compiler intrinsic is not available
- Disable full target validation (as opposed to simply H==0) for now

cpuminer Version 0.6.1 - February 4, 2011

- Fully validate "hash < target", rather than simply stopping our scan
  if the high 32 bits are 00000000.
- Add --retry-pause, to set length of pause time between failure retries
- Display proof-of-work hash and target, if -D (debug mode) enabled
- Fix max-nonce auto-adjustment to actually work.  This means if your
  scan takes longer than 5 seconds (--scantime), the miner will slowly
  reduce the number of hashes you work on, before fetching a new work unit.

cpuminer Version 0.6 - January 29, 2011

- Fetch new work unit, if scanhash takes longer than 5 seconds (--scantime)
- BeeCee1's sha256 4way optimizations
- lfm's byte swap optimization (improves via, cryptopp)
- Fix non-working short options -q, -r

cpuminer Version 0.5 - December 28, 2010

- Exit program, when all threads have exited
- Improve JSON-RPC failure diagnostics and resilience
- Add --quiet option, to disable hashmeter output.

cpuminer Version 0.3.3 - December 27, 2010

- Critical fix for sha256_cryptopp 'cryptopp_asm' algo

cpuminer Version 0.3.2 - December 23, 2010

- Critical fix for sha256_via

cpuminer Version 0.3.1 - December 19, 2010

- Critical fix for sha256_via
- Retry JSON-RPC failures (see --retry, under "minerd --help" output)

cpuminer Version 0.3 - December 18, 2010

- Add crypto++ 32bit assembly implementation
- show version upon 'minerd --help'
- work around gcc 4.5.x bug that killed 4way performance

cpuminer Version 0.2.2 - December 6, 2010

- VIA padlock implementation works now
- Minor build and runtime fixes

cpuminer Version 0.2.1 - November 29, 2010

- avoid buffer overflow when submitting solutions
- add Crypto++ sha256 implementation (C only, ASM elided for now)
- minor internal optimizations and cleanups

cpuminer Version 0.2 - November 27, 2010

- Add script for building a Windows installer
- improve hash performance (hashmeter) statistics
- add tcatm 4way sha256 implementation
- Add experimental VIA Padlock sha256 implementation

cpuminer Version 0.1.2 - November 26, 2010

- many small cleanups and micro-optimizations
- build win32 exe using mingw
- RPC URL, username/password become command line arguments
- remove unused OpenSSL dependency

cpuminer Version 0.1.1 - November 24, 2010

- Do not build sha256_generic module separately from cpuminer.

cpuminer Version 0.1 - November 24, 2010

- Initial release.