| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869 |
- SUPPORTED DEVICES
- Currently supported ASIC devices include ASICMiner's Block Erupter USB miners,
- Avalon, and Butterfly Labs' SC range of devices.
- AVALON
- Currently, Avalon boards are supported only by connecting them directly (or via
- a hub) to a regular PC running BFGMiner. It is also possible to install the
- OpenWrt packages of BFGMiner to the Avalon's embedded controller, but this is
- not a simple task due to its lack of available flash space.
- To use the Avalon from a regular PC, you will need to specify two options:
- First, add the -S option specifying the avalon driver specifically. For example,
- -S avalon:\\.\COM9
- Next, use the --avalon-options copying the command as used by the internal
- router used by the Avalon. eg:
- --avalon-options 115200:24:10:45:282
- The values are baud : miners : asic count : timeout : frequency.
- Baud:
- The device is pretty much hard coded to emulate 115200 baud so you shouldn't
- change this.
- Miners:
- Most Avalons are 3 module devices, which come to 24 miners. 4 module devices
- would use 32 here.
- Asic count:
- Virtually all have 10, so don't change this.
- Timeout:
- This is how long the device will work on a work item before accepting new work
- to replace it. It should be changed according to the frequency (last setting).
- It is possible to set this a little lower if you are trying to tune for short
- block mining (eg p2pool) but much lower and the device will start creating
- duplicate shares.
- Sample settings for different frequencies (last 2 values):
- 43:300
- 45:282
- 47:270
- 50:256
- Frequency:
- This is the clock speed of the devices. Only specific values work, 256, 270,
- 282 (default) and 300.
- If you use the full curses based interface with Avalons you will get this
- information:
- AVA 0: 22/ 46C 60%/2400R
- The values are:
- ambient temp / highest device temp set fan % / lowest detected fan RPM.
- Use the API for more detailed information than this.
- ---
- This code is provided entirely free of charge by the programmer in his spare
- time so donations would be greatly appreciated. Please consider donating to the
- address below.
- Luke-Jr <luke-jr+bfgminer@utopios.org>
- 1QATWksNFGeUJCWBrN4g6hGM178Lovm7Wh
|