| 123456789101112131415161718192021222324252627 |
- Open up /etc/opkg.conf (on your router) in your favourite editor. You will see
- a line that looks similar to this at the top (depending on your device):
- src/gz attitude_adjustment http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/packages
- Note the platform following the OpenWrt version. In this example, it is ar71xx.
- Now add a new line immediately below it, similar to this:
- src/gz bfgminer http://luke.dashjr.org/programs/bitcoin/files/bfgminer/latest/openwrt/12.09/ar71xx
- Be sure you put the same platform at the end as your OpenWrt repository!
- Also note that you can change "latest" to "stable" or "testing" to get better-tested versions.
- Next, save the file and exit your editor. Tell opkg to reload its package lists
- by running the command:
- opkg update
- If you get a "404 Not Found" error, then your router may not be supported. If
- you open an issue for your router's platform, it may be possible to add
- support.
- If all went well updating your package list, you can now install BFGMiner and
- any drivers and/or bitstreams you might need:
- opkg install bfgminer
- opkg install kmod-usb-serial-ftdi
- opkg install kmod-usb-serial-cp210x
- opkg install kmod-usb-serial-pl2303
- opkg find bfgminer-bitstream*
- opkg install bfgminer-bitstream-ztex-ufm1_15y1
- opkg install bfgminer-bitstream-ztex-ufm1_15b1
- opkg install bfgminer-bitstream-fpgaminer
|
