###################################################################################### # # # Native WIN32 setup and build instructions (on mingw32/Windows): # # # ###################################################################################### ************************************************************************************** * Introduction * ************************************************************************************** The following instructions have been tested on both Windows 7 and Windows XP. Most of what is described below (copying files, downloading files, etc.) can be done directly in the MinGW MSYS shell; these instructions do not do so because package versions and links change over time. The best way is to use your browser, go to the links directly, and see for yourself which versions you want to install. Winrar was used to do the extracting of archive files in the making of this guide. ************************************************************************************** * A tip that might help you along the way * ************************************************************************************** Enable "QuickEdit Mode" in your Command Prompt Window or MinGW Command Prompt Window (No need to go into the context menu to choose edit-mark/copy/paste): Right-click on the title bar and click Properties. Under the Options tab, check the box for "QuickEdit Mode". Alternately, if you want this change to be permanent on all of your Command Prompt Windows; you can click Defaults instead of Properties as described above. Now you can drag and select text you want to copy, right-click to copy the text to the clipboard and right-click once again to paste it at the desired location. You could for example, copy some text from this document to the clipboard and right click in your Command Prompt Window to paste what you copied. ************************************************************************************** * Install mingw32 * ************************************************************************************** Go to this url ==> http://www.mingw.org/wiki/Getting_Started Click the link that says "Download and run the latest mingw-get-inst version." Download and run the latest file. Install MinGW in the default directory. (I downloaded the one labeled "mingw-get-inst-20120426" - note that this could be a different version later.) Make sure to check the option for "Download latest repository catalogs". I just selected all the check boxes (excluding "Fortran Compiler") so that everything was installed. ************************************************************************************** * Create mstcpip.h * ************************************************************************************** Open notepad and copy the following into it. Save it as "\MinGW\include\mstcpip.h". Make sure it does not have the ".txt" extension (If it does then rename it). struct tcp_keepalive { u_long onoff; u_long keepalivetime; u_long keepaliveinterval; }; #ifndef USE_WS_PREFIX #define SIO_KEEPALIVE_VALS _WSAIOW(IOC_VENDOR, 4) #else #define WS_SIO_KEEPALIVE_VALS _WSAIOW(WS_IOC_VENDOR, 4) #endif ************************************************************************************** * Run the MSYS shell for the first time to create your user directory * ************************************************************************************** (Start Icon/keyboard key ==> All Programs ==> MinGW ==> MinGW Shell). This will create your user directory for you. ************************************************************************************** * OPTIONAL - Install YASM (only for if you intend to enable CPU mining) * ************************************************************************************** Open a browser to http://yasm.tortall.net/Download.html Download the Win32 or Win64 exe as appropriate Copy to c:\mingw\bin and rename to yasm.exe ************************************************************************************** * Install libpdcurses * ************************************************************************************** Type the lines below to install libpdcurses. mingw-get install mingw32-libpdcurses mingw-get install mingw32-pdcurses Ctrl-D or typing "logout" and pressing the enter key should get you out of the window. ************************************************************************************** * Install UTHash/UTList * ************************************************************************************** Go to the website http://troydhanson.github.io/uthash/ Download uthash-master.zip and unzip anywhere Go to the directory uthash-master/src Copy all the files to c:/mingw/include ************************************************************************************** * Install GTK-WIN, required for Pkg-config in the next step * ************************************************************************************** Go to this url ==> http://sourceforge.net/projects/gtk-win/ Download the file. After you have downloaded the file Double click/run it and this will install GTK+ I chose all the selection boxes when I installed. Copy libglib-2.0-0.dll and intl.dll from \Program Files (x86)\gtk2-runtime\bin to \MinGW\bin Note: If you are on a 32 bit version of windows "Program Files (x86)" will be "Program Files". ************************************************************************************** * Install pkg-config * ************************************************************************************** Go to this url ==> http://www.gtk.org/download/win32.php Scroll down to where it shows pkg-cfg. Download the file from the tool link. Extract "pkg-config.exe" from bin and place in your \MinGW\bin directory. Download the file from the "Dev" link. Extract "pkg.m4" from share\aclocal and place in your \MingW\share\aclocal directory. ************************************************************************************** * Install libcurl * ************************************************************************************** Go to this url ==> http://curl.haxx.se/download.html#Win32 At the section where it says "Win32 - Generic", Click on the link that indicates Win32 2000.XP 7.27.0 libcurl SSL and download it. The one I downloaded may not be current for you. Choose the latest. Extract the files that are in the zip (bin, include, and lib) to their respective locations in MinGW (\MinGW\bin, \MinGW\include, and \MinGW\lib). Edit the file \MinGW\lib\pkgconfig\libcurl.pc and change "-lcurl" to "-lcurl -lcurldll". Ref. http://old.nabble.com/gcc-working-with-libcurl-td20506927.html ************************************************************************************** * Install libjansson * ************************************************************************************** Go to this url ==> http://www.digip.org/jansson/releases/ Download the latest tar with library sources. Copy the jansson-X.X folder into your \MinGW\msys\1.0\home\ Run the MinGW MSYS shell (Start Icon/keyboard key ==> All Programs ==> MinGW ==> MinGW Shell). Enter jansson-X.X dir, and type ./configure --prefix=/MinGW make make check make install (Source: http://www.digip.org/jansson/doc/dev/gettingstarted.html) (Source: https://groups.google.com/forum/#!msg/jansson-users/CTPFBeZ0ZWQ/W3uuOuWZegkJ) ************************************************************************************** * Optional - Install libusb if you need auto USB device detection * * Required for Ztex and X6500 * ************************************************************************************** Go to this url ==> http://git.libusb.org/?p=libusb.git;a=snapshot;h=master;sf=zip save the file to your local storage. Open the file and copy the libusb* folder to \MinGW\msys\1.0\home\(your user directory/folder). Or if you do not want to download the file directly and would like to use git then Type the following from the MSYS shell in your home folder. git clone git://git.libusb.org/libusb.git Run the MinGW MSYS shell (Start Icon/keyboard key ==> All Programs ==> MinGW ==> MinGW Shell). Change the working directory to your libusb project folder. Example: cd libusb-something [Enter Key] if you are unsure then type "ls -la" Another way is to type "cd libusb" and then press the tab key; It will auto fill. Type the lines below one at a time. Look for problems after each one before going on to the next. ./autogen.sh --disable-debug-log --prefix=/MinGW make make install You may now exit the MSYS shell. Ctrl-D or typing "logout" and pressing the enter key should get you out of the window. You will have to copy "libusb-1.0.dll" to your working BFGMiner binary directory. You will find "libusb-1.0.dll" in the \MinGW\bin directory/folder. Use this method if libusb does not work for you on Ztex. Once someone lets us know Libusb works instead of libusbx then we will remove the section below this line. Run the MSYS shell and change into the libusb folder as above. Type ==> make uninstall Go to this url ==> http://libusbx.org/ Click on the "Downloads" tab. Click on "releases". Click on the latest version. I downloaded 1.0.14; yours may be newer. Do not download from the link that says "Looking for the latest version?". Click on "Windows" Click on the file and download it. I downloaded libusbx-1.0.12-win.7z. Extract the the following from the file and place in where directed. Copy libusb.h from include\libusbx-1.0 to \MinGW\include\libusb-1.0\libusb.h Copy contents of MinGW32\static \MinGW\lib Copy contents of MinGW32\dll to \MinGW\lib NOTE: You will have to copy "libusb-1.0.dll" to your working BFGMiner binary directory. ************************************************************************************** * REQUIRED - Install Git into MinGW/MSYS * ************************************************************************************** Go to this url ==> http://code.google.com/p/msysgit/downloads/list?q=full+installer+official+git Download and install the latest full installer In Windows Explorer, go to c:\MinGW\msys\1.0\home\ Create a text file named profile.txt with one of the following lines (leave off the win??> part) win86> PATH=$PATH:/c/Program\ Files/Git/bin win64> PATH=$PATH:/c/Program\ Files\ \(x86\)/Git/bin Save the file, open a MSYS Shell, and enter the following commands mv profile.txt .profile then close ALL MSYS Shell windows currently open Open a new MSYS Shell and enter the following commands git clone git://github.com/luke-jr/bfgminer.git If you just want to update the source after you have already cloned, type: cd bfgminer git fetch Now you can get the latest source directly from github. ************************************************************************************** * Build bfgminer.exe * ************************************************************************************** Run the MinGW MSYS shell (Start Icon/keyboard key ==> All Programs ==> MinGW ==> MinGW Shell). Change the working directory to your BFGMiner project folder. Example: cd bfgminer-2.7.1 [Enter Key] if you are unsure then type "ls -la" Another way is to type "cd bfg" and then press the tab key; It will auto fill. Type the lines below one at a time. Look for problems after each one before going on to the next. ./autogen.sh CFLAGS="-O2 -msse2" ./configure (additional config options, see below) make strip bfgminer.exe <== only do this if you are not compiling for debugging ************************************************************************************** * Some ./configure options * ************************************************************************************** --enable-cpumining Build with cpu mining support(default disabled) --disable-opencl Build without support for OpenCL (default enabled) --disable-adl Build without ADL monitoring (default enabled) --disable-bitforce Compile support for BitForce (default enabled) --disable-icarus Compile support for Icarus (default enabled) --disable-modminer Compile support for ModMiner (default enabled) --disable-x6500 Compile support for X6500 (default enabled) --disable-ztex Compile support for Ztex (default if libusb) --enable-scrypt Compile support for scrypt litecoin mining (default disabled) --without-curses Compile support for curses TUI (default enabled) --without-libudev Autodetect FPGAs using libudev (default enabled) ************************************************************************************** * Copy files to a build directory/folder * ************************************************************************************** Make a directory and copy the following files into it. This will be your BFGMiner Folder that you use for mining. Remember the .cl filenames could change on later releases. If you installed a different version of libcurl then some of those dll's may be different as well. bfgminer.exe from \MinGW\msys\1.0\home\(username)\bfgminer *.cl from \MinGW\msys\1.0\home\(username)\bfgminer README from \MinGW\msys\1.0\home\(username)\bfgminer libcurl.dll from \MinGW\bin libidn-11.dll from \MinGW\bin libeay32.dll from \MinGW\bin ssleay32.dll from \MinGW\bin libpdcursesw.dll from \MinGW\bin pthreadGC2.dll from \MinGW\bin libjansson-X.dll from \MinGW\msys\1.0\local\bin libblkmaker_jansson-0.1-0.dll from \MinGW\msys\1.0\home\(username)\bfgminer\libblkmaker\.libs libblkmaker-0.1-0.dll from \MinGW\msys\1.0\home\(username)\bfgminer\libblkmaker\.libs ###################################################################################### # # # Native WIN32 setup and build instructions (on mingw32/Windows) complete # # # ######################################################################################