 Kano
|
ecc9457b6b
Avalon BTB allow partial work to be transferred
|
12 years ago |
|
Kano
|
6dabdff15c
avalon_cts use correct buffer
|
12 years ago |
 Chris Chua
|
782206ceca
using usb_ident
|
12 years ago |
|
Chris Chua
|
b8cdaea8bb
forgot a return
|
12 years ago |
|
Chris Chua
|
b0f4d55be7
changes to Avalon driver for BitBurner boards
|
12 years ago |
|
Kano
|
ad1572f77f
size check get_datestamp/get_timestamp and remove unused cgpu->init
|
12 years ago |
|
Kano
|
385a70bea7
make all statline overflow safe
|
12 years ago |
 Con Kolivas
|
a011fe5182
Check for a timeout in avalon_scanhash and post to the write sem if we receive one.
|
12 years ago |
|
Con Kolivas
|
3b2f9ccb88
Decay result count in avalon more slowly to not falsely detect idle periods as low result return rates.
|
12 years ago |
|
Con Kolivas
|
4b4a13549e
Count the number of miners idled in avalon to account more accurately for when its result return rate is too low.
|
12 years ago |
|
Con Kolivas
|
e13c580cac
Fix potential dereference when starting avalon with all new work.
|
12 years ago |
|
Con Kolivas
|
18422fbf7d
Only throttle avalon clockspeed in avalon_auto in non optimal temperature settings if the fanspeed has reached maximum.
|
12 years ago |
|
Con Kolivas
|
3ef0db5658
Reinstate more aggressive <2% HW error target for avalon-auto
|
12 years ago |
|
Con Kolivas
|
05344eff03
Set avalon fan min and fan max to PWM values instead of percentage.
|
12 years ago |
|
Con Kolivas
|
065b6a5e36
Provide an --avalon-freq command line to give a valid range of frequencies for avalon in auto mode.
|
12 years ago |
|
Con Kolivas
|
36b556aa66
Set the avalon idle frequency to lowest if avalon auto is enabled and we have an overheat condition.
|
12 years ago |
|
Con Kolivas
|
ce214e1270
Decrease avalon frequency in auto mode if we are unable to maintain the temperature in the optimal range.
|
12 years ago |
|
Con Kolivas
|
d7c99cd116
Use a more conservative upper limit of 1% for hardware errors with avalon auto frequency.
|
12 years ago |
|
Con Kolivas
|
f142a4de23
Allow the avalon fanspeed range to be passed as parameter on the command line, default to 20-100%
|
12 years ago |
|
Con Kolivas
|
34547596b3
Support all avalon frequencies on the command line.
|
12 years ago |
|
Con Kolivas
|
18f9112e48
Reset the other auto counters in avalon when idling a device.
|
12 years ago |
|
Con Kolivas
|
e811c4dc77
Add an avalon-auto option which enables dynamic overclocking based on hardware error rate for maximum effective hashrate.
|
12 years ago |
|
Con Kolivas
|
9b45daba6b
Add an --avalon-cutoff feature which puts the avalon idle should it reach this temperature, defaulting to 60, re-enabling it when it gets to target temperature.
|
12 years ago |
|
Con Kolivas
|
1fca632f7c
Add an --avalon-temp option to allow a user specified target temperature.
|
12 years ago |
|
Con Kolivas
|
6bdfed3db4
Demote no matching work message to verbose logging only on avalon.
|
12 years ago |
|
Con Kolivas
|
6cc09aa1e9
Make the fan control on the avalon a simple PID controller with a target temperature of 45.
|
12 years ago |
|
Con Kolivas
|
c64d95f267
Support new overclocking speeds for avalon: 325, 350 and 375
|
12 years ago |
|
Con Kolivas
|
df81ce6784
Use the nusleep function for sleeping after sending work in avalon.
|
12 years ago |
|
Con Kolivas
|
a36e55b754
Set the avalon preferred packet size to 512.
|
12 years ago |
|
Con Kolivas
|
581afcf9ab
Use only one cgsem in avalon signalling when the write thread should commit work by reading the status bytes off during an avalon_read, minimising the number of usb calls and resetting from only one place.
|
12 years ago |
