 Con Kolivas
|
e0a9f1aae3
Allow temperature targets to be set on a per-card basis on the command line.
|
14 years ago |
|
Con Kolivas
|
d6f3bd0564
Display which GPU has overheated in warning message.
|
14 years ago |
|
Con Kolivas
|
b50041c880
Allow per-device fan ranges to be set and use them in auto-fan mode.
|
14 years ago |
|
Con Kolivas
|
9b5cd61886
Implement accepting a range of engine speeds as well to allow a lower limit to be specified on the command line.
|
14 years ago |
|
Con Kolivas
|
7ea7f5f324
Allow temperatures greater than 100 degrees.
|
14 years ago |
|
Con Kolivas
|
4628db5bfd
Change the fan speed by only 5% if it's over the target temperature but less than the hysteresis value to minimise overshoot down in temperature.
|
14 years ago |
|
Con Kolivas
|
3997f308a0
Add a thermal cutoff option as well and set it to 95 degrees by default.
|
14 years ago |
|
Con Kolivas
|
311420db9d
Flag adl as active if any card is successfully activated.
|
14 years ago |
|
Con Kolivas
|
058303bcf3
Only reset values on exiting if we've ever modified them.
|
14 years ago |
|
Con Kolivas
|
b8be1e6c15
Ignore whether the display is active or not since only display enabled devices work this way, and we skip over repeat entries anwyay.
|
14 years ago |
|
Con Kolivas
|
f89c032d2b
The ° character is not reliably shown on all platforms so remove it.
|
14 years ago |
|
Con Kolivas
|
fd23532bdb
Make adl attempt to compile only on win32 or linux since there is no support for it on onther platforms, and fix sleep() definition on win32.
|
14 years ago |
|
Con Kolivas
|
16aff37c66
Fix compilation errors on mingw32 to do with order of pulling in headers, curses.h and definition of bool.
|
14 years ago |
|
Con Kolivas
|
9f618f4a97
Lower profile settings cannot be higher than higher profile ones so link any drops in settings.
|
14 years ago |
|
Con Kolivas
|
ca3793558a
Ramp up the fan more if we're over target temperature.
|
14 years ago |
|
Con Kolivas
|
bc9724406a
Provide locking around all adl calls to prevent races.
|
14 years ago |
|
Con Kolivas
|
666d724b8a
Set a safe starting fan speed if we're automanaging the speeds.
|
14 years ago |
|
Con Kolivas
|
5fc56a45ee
Force the speed to high on startup and restore it to whatever the setting was on exit.
|
14 years ago |
|
Con Kolivas
|
cb29fb7d57
Remove the safety checks in speed setting since confirmation is done first in the menu, then show the new current values after a short pause.
|
14 years ago |
|
Con Kolivas
|
ee06a3baca
Limit fanspeed to 85% properly when temperature is below overheat levels.
|
14 years ago |
|
Con Kolivas
|
40491cd537
Change default hysteresis to 3 degrees for lower average fanspeeds.
|
14 years ago |
|
Con Kolivas
|
47f1a75924
Implement setting the GPU powertune value of all devices or each device as a comma separated value.
|
14 years ago |
|
Con Kolivas
|
656bacc5a9
Get the value of powertune in get_stats.
|
14 years ago |
|
Con Kolivas
|
7711c6fbd5
Implement changing of powertune value from the GPU change settings menu.
|
14 years ago |
|
Con Kolivas
|
bd292258d3
Add support for monitoring powertune setting.
|
14 years ago |
|
Con Kolivas
|
3a5663cac1
Implement setting the GPU fan speed of all devices or each device as a comma separated value.
|
14 years ago |
|
Con Kolivas
|
8ae273c56c
Implement setting the GPU voltage of all devices or each device as a comma separated value.
|
14 years ago |
|
Con Kolivas
|
54bc30ceec
Implement setting the GPU memory clock speed of all devices or each device as a comma separated value.
|
14 years ago |
|
Con Kolivas
|
ec8808d004
Implement setting the GPU engine clock speed of all devices or each device as a comma separated value.
|
14 years ago |
|
Con Kolivas
|
12a167a3f1
Implement menus to change temperature limits.
|
14 years ago |
