|
|
@@ -14,213 +14,9 @@
|
|
|
#ifdef USE_HASHFAST
|
|
|
#include "miner.h"
|
|
|
#include "elist.h"
|
|
|
+#include "hf_protocol.h"
|
|
|
|
|
|
-#define HASHFAST_MINER_THREADS 1
|
|
|
-
|
|
|
-// Some serial protocol definitions
|
|
|
-#define DEFAULT_BAUD_RATE 115200
|
|
|
-
|
|
|
-#define HF_PREAMBLE (uint8_t) 0xaa
|
|
|
-#define HF_BROADCAST_ADDRESS (uint8_t) 0xff
|
|
|
-
|
|
|
-// Operation codes (Second header byte)
|
|
|
-#define OP_NULL 0
|
|
|
-#define OP_ROOT 1
|
|
|
-#define OP_RESET 2
|
|
|
-#define OP_PLL_CONFIG 3
|
|
|
-#define OP_ADDRESS 4
|
|
|
-#define OP_READDRESS 5
|
|
|
-#define OP_HIGHEST 6
|
|
|
-#define OP_BAUD 7
|
|
|
-#define OP_UNROOT 8
|
|
|
-
|
|
|
-#define OP_HASH 9
|
|
|
-#define OP_NONCE 10
|
|
|
-#define OP_ABORT 11
|
|
|
-#define OP_STATUS 12
|
|
|
-#define OP_GPIO 13
|
|
|
-#define OP_CONFIG 14
|
|
|
-#define OP_STATISTICS 15
|
|
|
-#define OP_GROUP 16
|
|
|
-#define OP_CLOCKGATE 17
|
|
|
-
|
|
|
-// All packets begin with a standard 8 byte header
|
|
|
-struct hf_header {
|
|
|
- uint8_t preamble; // Always 0xaa
|
|
|
- uint8_t operation_code;
|
|
|
- uint8_t chip_address;
|
|
|
- uint8_t core_address;
|
|
|
- uint16_t hdata; // Header specific data
|
|
|
- uint8_t data_length; // .. of data frame to follow, in 4 byte blocks, 0=no data
|
|
|
- uint8_t crc8; // Computed across bytes 1-6 inclusive
|
|
|
-} __attribute__((packed,aligned(4))); // 8 bytes total
|
|
|
-
|
|
|
-// Body of packet for an OP_HASH operation
|
|
|
-struct hf_hash {
|
|
|
- uint8_t midstate[32]; // Computed from first half of block header
|
|
|
- uint8_t merkle_residual[4]; // From block header
|
|
|
- uint32_t timestamp; // From block header
|
|
|
- uint32_t bits; // Actual difficulty target for block header
|
|
|
- uint32_t starting_nonce; // Usually set to 0
|
|
|
- uint32_t nonce_loops; // How many nonces to search, or 0 for 2^32
|
|
|
- uint16_t ntime_loops:12; // How many times to roll timestamp, or 0
|
|
|
- uint16_t spare1:4;
|
|
|
- uint8_t search_difficulty; // Search difficulty to use, number of leading '0' bits required
|
|
|
- uint8_t spare2;
|
|
|
- uint32_t spare3;
|
|
|
- uint32_t crc32; // Computed across all preceding data fields
|
|
|
-} __attribute__((packed,aligned(4))); // 64 bytes total, including CRC
|
|
|
-
|
|
|
-// How nonces are returned in OP_NONCE packets
|
|
|
-struct hf_candidate_nonce {
|
|
|
- uint32_t nonce; // Candidate nonce
|
|
|
- uint16_t sequence; // Sequence number from corresponding OP_HASH
|
|
|
- uint16_t ntime:12; // ntime offset, if ntime roll occurred
|
|
|
- uint16_t search:1; // Search forward next 128 nonces to find solution
|
|
|
- uint16_t spare:3;
|
|
|
-} __attribute__((packed,aligned(4)));
|
|
|
-
|
|
|
-// Body of packet for an OP_CONFIG operation
|
|
|
-struct hf_config_data {
|
|
|
- uint16_t status_period:11; // Periodic status time, msec
|
|
|
- uint16_t enable_periodic_status:1; // Send periodic status
|
|
|
- uint16_t send_status_on_core_idle:1; // Schedule status whenever core goes idle
|
|
|
- uint16_t send_status_on_pending_empty:1; // Schedule status whenever core pending goes idle
|
|
|
- uint16_t pwm_active_level:1; // Active level of PWM outputs, if used
|
|
|
- uint16_t forward_all_privileged_packets:1; // Forward priv pkts -- diagnostic
|
|
|
- uint8_t status_batch_delay; // Batching delay, time to wait before actually sending status
|
|
|
- uint8_t watchdog:7; // Watchdog timeout, seconds
|
|
|
- uint8_t disable_sensors:1; // Diagnostic
|
|
|
-
|
|
|
- uint8_t rx_header_timeout:7; // Header timeout in char times
|
|
|
- uint8_t rx_ignore_header_crc:1; // Ignore rx header crc's (diagnostic)
|
|
|
- uint8_t rx_data_timeout:7; // Data timeout in char times / 16
|
|
|
- uint8_t rx_ignore_data_crc:1; // Ignore rx data crc's (diagnostic)
|
|
|
- uint8_t stats_interval:7; // Minimum interval to report statistics (seconds)
|
|
|
- uint8_t stat_diagnostic:1; // Never set this
|
|
|
- uint8_t measure_interval; // Die temperature measurment interval (msec)
|
|
|
-
|
|
|
- uint32_t one_usec:12; // How many LF clocks per usec.
|
|
|
- uint32_t max_nonces_per_frame:4; // Maximum # of nonces to combine in a single frame
|
|
|
- uint32_t voltage_sample_points:8; // Bit mask for sample points (up to 5 bits set)
|
|
|
- uint32_t pwm_phases:2; // phases - 1
|
|
|
- uint32_t trim:4; // Trim value for temperature measurements
|
|
|
- uint32_t clock_diagnostic:1; // Never set this
|
|
|
- uint32_t forward_all_packets:1; // Forward everything - diagnostic.
|
|
|
-
|
|
|
- uint16_t pwm_period; // Period of PWM outputs, in reference clock cycles
|
|
|
- uint16_t pwm_pulse_period; // Initial count, phase 0
|
|
|
-} __attribute__((packed,aligned(4)));
|
|
|
-
|
|
|
-// What comes back in the body of an OP_STATISTICS frame
|
|
|
-struct hf_statistics {
|
|
|
- uint8_t rx_header_crc; // Header CRC's
|
|
|
- uint8_t rx_body_crc; // Data CRC's
|
|
|
- uint8_t rx_header_timeouts; // Header timeouts
|
|
|
- uint8_t rx_body_timeouts; // Data timeouts
|
|
|
- uint8_t core_nonce_fifo_full; // Core nonce Q overrun events
|
|
|
- uint8_t array_nonce_fifo_full; // System nonce Q overrun events
|
|
|
- uint8_t stats_overrun; // Overrun in statistics reporting
|
|
|
- uint8_t spare;
|
|
|
-} __attribute__((packed,aligned(4)));
|
|
|
-
|
|
|
-
|
|
|
-// Not really necessary (could just link directly to CGMiner's work structures), but these are
|
|
|
-// here as an internal place to stage split jobs in the future, e.g. ntime rolling across
|
|
|
-// multiple cores.
|
|
|
-typedef struct hf_work_t {
|
|
|
- struct work *work; // Finally out to cgminer's work
|
|
|
-
|
|
|
- uint8_t data[128]; // XXX These are only replicated here to help de-couple the
|
|
|
- uint8_t midstate[32]; // XXX driver code from cgminer's specifics, since this is
|
|
|
- uint8_t target[32]; // XXX a sample driver. There's no other reason.
|
|
|
-
|
|
|
- int split_count; // How many cores this is split between
|
|
|
-} hf_work_t;
|
|
|
-
|
|
|
-// Internal representation of a "job". Each core should normally have one active job and one pending job queued to it.
|
|
|
-// This is where the ALL IMPORTANT sequence number is kept. When jobs are created, this structure is put in the "active"
|
|
|
-// list (unique to the asic/core), and an incrementing sequence number is assigned to the job. Only when a sequence number
|
|
|
-// that matches or exceeds (modulo <max sequence>) this number in a returned OP_STATUS, do we know that the "busy" bits
|
|
|
-// associated with this same core represent the job status, i.e. the associated OP_HASH is no longer in flight.
|
|
|
-typedef struct hf_job_t {
|
|
|
- struct list_head l;
|
|
|
-
|
|
|
- uint8_t chip; // Chip address
|
|
|
- uint8_t core; // Core address
|
|
|
- uint16_t sequence; // Copy of the active sequence number
|
|
|
-
|
|
|
- hf_work_t *work; // Pointer to the work block
|
|
|
-
|
|
|
-} hf_job_t;
|
|
|
-
|
|
|
-// Per-core structure
|
|
|
-typedef struct hf_core_t {
|
|
|
- hf_job_t *active; // Active job on this core, NULL if none
|
|
|
- hf_job_t *pending; // Pending job on this core, NULL if none
|
|
|
- uint8_t enabled; // 1 = enabled, 0 = disabled
|
|
|
- uint8_t inflight; // How many jobs are "inflight": 0, 1 or 2
|
|
|
- uint8_t seen_allbusy; // We've seen both active and pending queues busy
|
|
|
-} hf_core_t; // since the last OP_HASH was queued
|
|
|
-
|
|
|
-// Per device structure. This is found by looking up an array, which is indexed
|
|
|
-// by CGMiner's cgpu_info.device_id field.
|
|
|
-typedef struct hf_info_t {
|
|
|
- int miner_count;
|
|
|
- int timeout;
|
|
|
- int baud_rate; // Baud rate, if applicable
|
|
|
- int ref_frequency; // Reference clock rate
|
|
|
- int asic_count; // # of chips in the chain
|
|
|
- int core_count; // # of cores per chip
|
|
|
- int device_type; // What sort of device this is
|
|
|
- int max_search_difficulty; // # of bits set to 0 in hash
|
|
|
- int inflight_target; // Set to chips * cores * 2 (1 active, 1 pending each core)
|
|
|
- int hash_sequence; // The last hash sequence #
|
|
|
- int num_sequence; // A power of 2. What the sequence number range is.
|
|
|
- int num_work; // Number of "work" entries in work queue
|
|
|
- int max_work; // Target maximum number of "work" entries in work queue
|
|
|
- // If work is split between cores, then max_work < inflight_target.
|
|
|
- int last_log; // Last OP_STATUS log time in seconds
|
|
|
-
|
|
|
- float thermal_trip_temperature; // Thermal trip temperature in degrees C
|
|
|
- int thermal_trip_limit; // Thermal trip limit in raw device adc counts (derived from above)
|
|
|
- int tacho_enable; // Set if there is a tacho to be read
|
|
|
-
|
|
|
- uint64_t hash_loops; // XXX Temp. How many nonces to cycle through (range limited for FPGA emulation)
|
|
|
-
|
|
|
- int no_matching_work;
|
|
|
-
|
|
|
- struct list_head active; // Double linked list through all ACTIVE in-flight jobs (hf_job_t's)
|
|
|
- struct list_head inactive; // Double linked list through all INACTIVE job blocks (hf_job_t's)
|
|
|
-
|
|
|
- int active_count; // How many active hf_job_t's are out there
|
|
|
- int inactive_count; // How many inactive hf_job_t's are out there
|
|
|
-
|
|
|
- hf_core_t **cores; // Points to array of chips, which each point to array of cores
|
|
|
- hf_work_t *work; // Points to array of work
|
|
|
-} hf_info_t;
|
|
|
-
|
|
|
-// The sequence distance between a sent and received sequence number.
|
|
|
-#define SEQUENCE_DISTANCE(tx,rx) ((tx)>=(rx)?((tx)-(rx)):(info->num_sequence+(tx)-(rx)))
|
|
|
-
|
|
|
-// Values info->device_type can take, comes from a completed OP_ADDRESS cycle
|
|
|
-#define HFD_G1 1 /* A real G-1 ASIC */
|
|
|
-#define HFD_VC709 128 /* FPGA Emulation */
|
|
|
-#define HFD_ExpressAGX 129 /* FPGA Emulation */
|
|
|
-
|
|
|
-// Some USB defines
|
|
|
-#define HASHFAST_USB_PACKETSIZE 512 /* XXX Fix this. */
|
|
|
-
|
|
|
-// Some low level serial defines
|
|
|
-#define HASHFAST_READ_TIME(baud) ((double)HASHFAST_READ_SIZE * (double)8.0 / (double)(baud))
|
|
|
-
|
|
|
-#define ASSERT1(condition) __maybe_unused static char sizeof_uint32_t_must_be_4[(condition)?1:-1]
|
|
|
-ASSERT1(sizeof(uint32_t) == 4);
|
|
|
-
|
|
|
-hf_info_t **hashfast_info;
|
|
|
-
|
|
|
-void hf_init_crc8(void);
|
|
|
-void hf_init_crc32(void);
|
|
|
+#define HASHFAST_MINER_THREADS 1
|
|
|
|
|
|
#endif /* USE_HASHFAST */
|
|
|
#endif /* HASHFAST_H */
|
Con Kolivas