Make wrapping consistent at 79-80 characters per line

Conflicts:
	API-README
	FPGA-README

API-README

@@ -913,13 +913,12 @@ true
 Default:
  $notify = true;
 
-Set $notify to false to NOT attempt to display the notify command
-table of data
+Set $notify to false to NOT attempt to display the notify command table of data
 
-Set $notify to true to attempt to display the notify command on
-the single rig page
-If your older version of BFGMiner returns an 'Invalid command'
-because it doesn't have notify - it just shows the error status table
+Set $notify to true to attempt to display the notify command on the single rig
+page
+If your older version of BFGMiner returns an 'Invalid command' because it
+doesn't have notify - it just shows the error status table
 
 ---------
 
@@ -935,12 +934,12 @@ This assumes shares are 1 difficulty shares
 Set $checklastshare to false to not do the above checks
 
 'expected' is calculated from the device Mh/s value
-So for example, a device that hashes at 380Mh/s should (on average)
-find a share every 11.3s
-If the last share was found more than 11.3 x 12 seconds (135.6s) ago,
-it is considered an error and highlighted
-If the last share was found more than 11.3 x 8 seconds (90.4s) ago,
-it is considered a warning and highlighted
+So for example, a device that hashes at 380Mh/s should (on average) find a
+share every 11.3s
+If the last share was found more than 11.3 x 12 seconds (135.6s) ago, it is
+considered an error and highlighted
+If the last share was found more than 11.3 x 8 seconds (90.4s) ago, it is
+considered a warning and highlighted
 
 The default highlighting is very subtle
 
@@ -949,8 +948,8 @@ The default highlighting is very subtle
 Default:
  $poolinputs = false;
 
-Set $poolinputs to true to show the input fields for adding a pool
-and changing the pool priorities on a single rig page
+Set $poolinputs to true to show the input fields for adding a pool and changing
+the pool priorities on a single rig page
 However, if $readonly is true, it will not display them
 
 ---------
@@ -958,13 +957,12 @@ However, if $readonly is true, it will not display them
 Default:
  $rigs = array('127.0.0.1:4028');
 
-Set $rigs to an array of your BFGMiner rigs that are running
- format: 'IP:Port' or 'Host:Port' or 'Host:Port:Name'
+Set $rigs to an array of your BFGMiner rigs that are running format: 'IP:Port'
+ or 'Host:Port' or 'Host:Port:Name'
 If you only have one rig, it will just show the detail of that rig
-If you have more than one rig it will show a summary of all the rigs
- with buttons to show the details of each rig -
- the button contents will be 'Name' rather than rig number, if you
- specify 'Name'
+If you have more than one rig it will show a summary of all the rigs with
+ buttons to show the details of each rig - the button contents will be 'Name'
+ rather than rig number, if you specify 'Name'
 e.g. $rigs = array('127.0.0.1:4028','myrig.com:4028:Sugoi');
 
 ---------
@@ -972,8 +970,8 @@ e.g. $rigs = array('127.0.0.1:4028','myrig.com:4028:Sugoi');
 Default:
  $rigipsecurity = true;
 
-Set $rigipsecurity to false to show the IP/Port of the rig
-in the socket error messages and also show the full socket message
+Set $rigipsecurity to false to show the IP/Port of the rig in the socket error
+ messages and also show the full socket message
 
 ---------
 
@@ -981,19 +979,19 @@ Default:
  $rigtotals = true;
  $forcerigtotals = false;
 
-Set $rigtotals to true to display totals on the single rig page
-'false' means no totals (and ignores $forcerigtotals)
+Set $rigtotals to true to display totals on the single rig page 'false' means
+ no totals (and ignores $forcerigtotals)
 
 If $rigtotals is true, all data is also right aligned
 With false, it's as before, left aligned
 
-This option is just here to allow people to set it to false
-if they prefer the old non-total display when viewing a single rig
+This option is just here to allow people to set it to false if they prefer the
+ old non-total display when viewing a single rig
 
-Also, if there is only one line shown in any section, then no
-total will be shown (to save screen space)
-You can force it to always show rig totals on the single rig page,
-even if there is only one line, by setting $forcerigtotals = true;
+Also, if there is only one line shown in any section, then no total will be
+ shown (to save screen space)
+You can force it to always show rig totals on the single rig page, even if
+ there is only one line, by setting $forcerigtotals = true;
 
 ---------
 
@@ -1004,17 +1002,17 @@ Default:
 The numbers are integer seconds
 
 The defaults should be OK for most cases
-However, the longer SND is, the longer you have to wait while
-PHP hangs if the target BFGMiner isn't running or listening
+However, the longer SND is, the longer you have to wait while PHP hangs if the
+target BFGMiner isn't running or listening
 
-RCV should only ever be relevant if BFGMiner has hung but the
-API thread is still running, RCV would normally be >= SND
+RCV should only ever be relevant if BFGMiner has hung but the API thread is
+still running, RCV would normally be >= SND
 
-Feel free to increase SND if your network is very slow
-or decrease RCV if that happens often to you
+Feel free to increase SND if your network is very slow or decrease RCV if that
+happens often to you
 
-Also, on some windows PHP, apparently the $usec is ignored
-(so usec can't be specified)
+Also, on some windows PHP, apparently the $usec is ignored (so usec can't be
+specified)
 
 ---------
 
@@ -1022,8 +1020,8 @@ Default:
  $hidefields = array();
 
 List of fields NOT to be displayed
-You can use this to hide data you don't want to see or don't want
-shown on a public web page
+You can use this to hide data you don't want to see or don't want shown on a
+public web page
 The list of sections are:
  SUMMARY, POOL, PGA, GPU, NOTIFY, CONFIG, DEVDETAILS, DEVS
 See the web page for the list of field names (the table headers)