README: Update statlines

README

@@ -332,8 +332,12 @@ The following options are available while running with a single keypress:
 M gives you something like:
 
 Select processor to manage using up/down arrow keys
- ICA 0 :                | 212.4/340.6/448.7Mh/s | A:4 R:0+0(none) HW:0/none
-[E]nable [D]isable
+ BFL 0a: 78.0C |  3.64/ 3.70/ 2.91Gh/s | A:46 R:0+0(none) HW:  2/none
+  BitFORCE SHA256 SC from Butterfly Labs
+Serial: FTWN6T67
+
+[D]isable
+Or press Enter when done
 
 
 P gives you:
@@ -400,19 +404,6 @@ R:   The number of Rejected shares, stale shares discarded (never submitted),
      and the percentage these are of total found.
 HW:  The number of HardWare errors, and percentage invalid of nonces returned
 
- GPU 1: 73.5C 2551RPM | 427.3/443.0/442.1Mh/s | A:8 R:0+0(none) HW:0 U:4.39/m
-
-Each column is as follows:
-Temperature (if supported)
-Fanspeed (if supported)
-A 5 second exponentially decaying average hash rate
-An all time average hash rate
-An all time average hash rate based on actual accepted shares
-The number of accepted shares
-The number of rejected shares (and percentage of total submitted)
-The number of hardware erorrs
-The utility defines as the number of shares / minute
-
 The BFGMiner status line shows:
  ST: 1  GF: 1  NB: 1  AS: 0  RF: 1  E: 2.42  U:22.53/m  BS:2.71k
 
@@ -433,6 +424,18 @@ This shows a short stretch of the current block, the next block's height and
 difficulty (including the network hashrate that difficulty represents), and when
 the search for the new block started.
 
+Each device shows:
+ BFL 2: 74.0C | 51.97/58.90/57.17Gh/s | A:847 R:15+0(.54%) HW:496/.91%
+
+Column are as follows:
+Temperature (if supported)
+5 second exponentially decaying average hash rate
+An all time average hash rate
+An all time average hash rate based on actual accepted shares
+The number of accepted shares
+The number of rejected plus discarded shares (and percentage of total submitted)
+The number of hardware errors and percentage of nonces invalid
+
 
 ---
 MULTIPOOL