######################################################################################
#                                                                                    #
#          Native WIN32 setup and build instructions (on mingw32/Windows):           #
#                                                                                    #
######################################################################################

**************************************************************************************
* Introduction                                                                       *
**************************************************************************************
The following instructions have been tested on both Windows 7 and Windows XP.
Most of what is described below (copying files, downloading files, etc.) can be done
directly in the MinGW MSYS shell; these instructions do not do so because package
versions and links change over time. The best way is to use your browser, go to the
links directly, and see for yourself which versions you want to install.
Winrar was used to do the extracting of archive files in the making of this guide.

If you think that this documentation was helpful and you wish to donate, you can
do so at the following address. 12KaKtrK52iQjPdtsJq7fJ7smC32tXWbWr

**************************************************************************************
* A tip that might help you along the way                                             *
**************************************************************************************
Enable "QuickEdit Mode" in your Command Prompt Window or MinGW Command Prompt
Window (No need to go into the context menu to choose edit-mark/copy/paste):
Right-click on the title bar and click Properties. Under the Options tab, check
the box for "QuickEdit Mode". Alternately, if you want this change to be
permanent on all of your Command Prompt Windows; you can click Defaults instead
of Properties as described above. Now you can drag and select text you want to
copy, right-click to copy the text to the clipboard and right-click once again to
paste it at the desired location. You could for example, copy some text from this
document to the clipboard and right click in your Command Prompt Window to paste
what you copied.

**************************************************************************************
* Install mingw32                                                                    *
**************************************************************************************
Go to this url ==> http://www.mingw.org/wiki/Getting_Started
Click the link that says "Download and run the latest mingw-get-inst version."
Download and run the latest file. Install MinGW in the default directory.
(I downloaded the one labeled "mingw-get-inst-20120426" - note that this could
be a different version later.)
Make sure to check the option for "Download latest repository catalogs".
I just selected all the check boxes (excluding "Fortran Compiler") so that everything
was installed.

**************************************************************************************
* Create mstcpip.h                                                                   *
**************************************************************************************
Open notepad and copy the following into it. Save it as "\MinGW\include\mstcpip.h".
Make sure it does not have the ".txt" extension (If it does then rename it).

struct tcp_keepalive
{
    u_long onoff;
    u_long keepalivetime;
    u_long keepaliveinterval;
};

#ifndef USE_WS_PREFIX

#define SIO_KEEPALIVE_VALS    _WSAIOW(IOC_VENDOR, 4)

#else

#define WS_SIO_KEEPALIVE_VALS    _WSAIOW(WS_IOC_VENDOR, 4)

#endif

**************************************************************************************
* Run the MSYS shell for the first time to create your user directory                *
**************************************************************************************
(Start Icon/keyboard key ==> All Programs ==> MinGW ==> MinGW Shell).
This will create your user directory for you.

**************************************************************************************
* Install libpdcurses                                                                *
**************************************************************************************
Type the lines below to install libpdcurses.
mingw-get install mingw32-libpdcurses
mingw-get install mingw32-pdcurses
Ctrl-D or typing "logout" and pressing the enter key should get you out of the
window.

**************************************************************************************
* Copy BFGMiner source to your MSYS working directory                                *
**************************************************************************************
Copy BFGMiner source code directory into:
\MinGW\msys\1.0\home\(folder with your user name)

**************************************************************************************
* Install GTK-WIN, required for Pkg-config in the next step                          *
**************************************************************************************
Go to this url ==> http://sourceforge.net/projects/gtk-win/
Download the file.
After you have downloaded the file Double click/run it and this will install GTK+
I chose all the selection boxes when I installed.
Copy libglib-2.0-0.dll and intl.dll from \Program Files (x86)\gtk2-runtime\bin to
\MinGW\bin
Note: If you are on a 32 bit version of windows "Program Files (x86)" will be
"Program Files".

**************************************************************************************
* Install pkg-config                                                                 *
**************************************************************************************
Go to this url ==> http://www.gtk.org/download/win32.php
Scroll down to where it shows pkg-cfg.
Download the file from the tool link. Extract "pkg-config.exe" from bin and place in
your  \MinGW\bin directory.
Download the file from the "Dev" link. Extract "pkg.m4" from share\aclocal and place
in your \MingW\share\aclocal directory.

**************************************************************************************
* Install libcurl                                                                    *
**************************************************************************************
Go to this url ==> http://curl.haxx.se/download.html#Win32
At the section where it says "Win32 - Generic", Click on the link that indicates
Win32 2000.XP 7.27.0 libcurl SSL and download it.
The one I downloaded may not be current for you. Choose the latest.
Extract the files that are in the zip (bin, include, and lib) to their respective
locations in MinGW (\MinGW\bin, \MinGW\include, and \MinGW\lib).
Edit the file \MinGW\lib\pkgconfig\libcurl.pc and change "-lcurl" to
"-lcurl -lcurldll".
Ref. http://old.nabble.com/gcc-working-with-libcurl-td20506927.html

**************************************************************************************
* Build bfgminer.exe                                                                 *
**************************************************************************************
Run the MinGW MSYS shell
(Start Icon/keyboard key ==> All Programs ==> MinGW ==> MinGW Shell).
Change the working directory to your BFGMiner project folder.
Example: cd bfgminer-2.7.1 [Enter Key] if you are unsure then type "ls -la"
Another way is to type "cd bfg" and then press the tab key; It will auto fill.
Type the lines below one at a time. Look for problems after each one before going on
to the next.

      adl.sh (optional - see below)
      autoreconf -fvi
      CFLAGS="-O2 -msse2" ./configure (additional config options, see below)
      make

**************************************************************************************
* Copy files to a build directory/folder                                             *
**************************************************************************************
Make a directory and copy the following files into it. This will be your BFGMiner
Folder that you use for mining. Remember the .cl filenames could change on later
releases. If you installed a different version of libcurl then some of those dll's
may be different as well.
  bfgminer.exe    from \MinGW\msys\1.0\home\(username)\bfgminer-x.x.x
  *.cl            from \MinGW\msys\1.0\home\(username)\bfgminer-x.x.x
  README          from \MinGW\msys\1.0\home\(username)\bfgminer-x.x.x
  libcurl.dll     from \MinGW\bin
  libidn-11.dll   from \MinGW\bin
  libeay32.dll    from \MinGW\bin
  ssleay32.dll    from \MinGW\bin
  libpdcurses.dll from \MinGW\bin
  pthreadGC2.dll  from \MinGW\bin

**************************************************************************************
* Optional - Install Git into MinGW/MSYS                                             *
**************************************************************************************
Go to this url ==> http://code.google.com/p/msysgit/
Click on the Downloads tab.
Download the latest "Portable" git archive.
Extract the git*.exe files from the bin folder and put them into \MinGW\bin.
Extract the share\git-core folder and place it into \MinGW\share.
After the previous step you should have a folder called \MinGW\share\git-core.
To test if it is working, open a MinGW shell and type the following:
  git config -–global core.autocrlf false (note: one time run only)
  git clone git://github.com/luke-jr/bfgminer.git

If you simply just want to update the source after you have already cloned, type:
  git pull

Now you can get the latest source directly from github.

**************************************************************************************
* Optional - Install libusb if you need auto USB device detection; required for Ztex *
**************************************************************************************
Go to this url ==> http://libusbx.org/
Click on the "Downloads" tab.
Click on "releases".
Click on the latest version. I downloaded 1.0.12; yours may be newer.
Do not download from the link that says "Looking for the latest version?".
Click on "Windows"
Click on the file and download it. I downloaded libusbx-1.0.12-win.7z.
Extract the the following from the file and place in where directed.
Copy libusb.h from include\libusbx-1.0 to \MinGW\include\libusb-1.0\libusb.h
Copy contents of MinGW32\static \MinGW\lib
Copy contents of MinGW32\dll to \MinGW\lib
You will have to copy "libusb-1.0.dll" to your working BFGMiner binary directory.

**************************************************************************************
* Some ./configure options                                                           *
**************************************************************************************
--enable-cpumining      Build with cpu mining support(default disabled)
--disable-opencl        Build without support for OpenCL (default enabled)
--disable-adl           Build without ADL monitoring (default enabled)
--enable-bitforce       Compile support for BitForce FPGAs(default disabled)
--enable-icarus         Compile support for Icarus Board(default disabled)
--enable-modminer       Compile support for ModMiner FPGAs(default disabled)
--enable-ztex           Compile support for Ztex Board(default disabled)
--enable-scrypt         Compile support for scrypt litecoin mining (default disabled)
--without-curses        Compile support for curses TUI (default enabled)
--without-libudev       Autodetect FPGAs using libudev (default enabled)

######################################################################################
#                                                                                    #
#       Native WIN32 setup and build instructions (on mingw32/Windows) complete      #
#                                                                                    #
######################################################################################
